sysCheck.. (opinions and recommendations)

Discussion in 'Wii - Hacking' started by portugeek, Apr 19, 2013.

Apr 19, 2013
  1. portugeek
    OP

    Member portugeek GBAtemp Fan

    Joined:
    Apr 6, 2013
    Messages:
    345
    Country:
    United States
    Code:
    sysCheck v2.1.0b19 by Double_A and R2-D2199, Nano
    ...runs on IOS58 (rev 6176).
     
    Region: NTSC-U
    System Menu 4.1U (v449)
    Priiloader installed
    Drive date: 2007.02.13
    Homebrew Channel 1.1.0 running on IOS58
    HomebrewFilter ist nicht installiert
    Hollywood v0x11
    Console ID: xxxxxxxxx
    Boot2 v3
    Found 129 titles.
    Found 53 IOS on this console. 3 of them are stub.
     
    IOS4 (rev 65280): Stub
    IOS9 (rev 54321): Trucha Bug
    IOS10 (rev 768): Stub
    IOS11 (rev 54321): Trucha Bug
    IOS12 (rev 526): No Patches
    IOS13 (rev 1032): No Patches
    IOS14 (rev 1032): No Patches
    IOS15 (rev 1032): No Patches
    IOS16 (rev 54321): Trucha Bug, ES Identify, Flash Access, NAND Access
    IOS17 (rev 1032): No Patches
    IOS20 (rev 54321): Trucha Bug
    IOS21 (rev 1039): No Patches
    IOS22 (rev 1294): No Patches
    IOS28 (rev 1807): No Patches
    IOS30 (rev 54321): Trucha Bug
    IOS31 (rev 3608): No Patches
    IOS33 (rev 3608): No Patches
    IOS34 (rev 3608): No Patches
    IOS35 (rev 3608): No Patches
    IOS36 (rev 54321): Trucha Bug, ES Identify, NAND Access
    IOS37 (rev 5663): No Patches
    IOS38 (rev 4124): No Patches
    IOS41 (rev 3607): No Patches
    IOS43 (rev 3607): No Patches
    IOS45 (rev 3607): No Patches
    IOS46 (rev 3607): No Patches
    IOS48 (rev 4124): No Patches
    IOS50 (rev 54321): Trucha Bug
    IOS51 (rev 4864): Stub
    IOS53 (rev 5663): No Patches
    IOS55 (rev 5663): No Patches
    IOS56 (rev 5662): No Patches
    IOS57 (rev 5919): No Patches
    IOS58 (rev 6176): USB 2.0
    IOS60 (rev 54321): Trucha Bug
    IOS61 (rev 5662): No Patches
    IOS62 (rev 6430): No Patches
    IOS70 (rev 54321): Trucha Bug
    IOS80 (rev 54321): Trucha Bug
    IOS90 (rev 54321): Trucha Bug
    IOS202[60] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
    IOS222[38] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223[38+37] (rev 4, Info: hermes-v4): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS224[57] (rev 65535, Info: hermesrodries-v6): Trucha Bug, NAND Access, USB 2.0
    IOS236 (rev 54321): Trucha Bug, ES Identify, NAND Access
    IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, NAND Access
    IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS249[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS251[58] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
    BC v5
    MIOS v10 (DIOS MIOS 2.6.1+)
     
    Report generated on 2013/04/19.
    These are my Wii's sysCheck results. To be honest, I don't know a whole lot when it comes to IOS's. I'm not even sure if any of them are outdated or not. But for those of you who do know, I was wondering if you guys could recommend any needed updates?

    [EDIT:] Also, I believe I have DM 2.9 installed. Is that what the "+" at the end of DIOS MIOS 2.6.1 is trying to tell me?
     


  2. scooby74029

    Member scooby74029 "fake coder"

    Joined:
    May 7, 2010
    Messages:
    1,174
    Location:
    oklahoma, USA
    Country:
    United States
    everything looks fine as long as you are not having problems i wouldn't mess with it not sure on the DM thing though
     
  3. portugeek
    OP

    Member portugeek GBAtemp Fan

    Joined:
    Apr 6, 2013
    Messages:
    345
    Country:
    United States
    Everything seems to be working fine. I've been messing with emuNAND recently and I've been experiencing some incompatibility. I've read people talking about rev 19 and d2x-r9 beta. I've actually seen d2x-r9 brought up for a variety of different issues. Then I'll hear people saying stuff like "base 38" when referring to IOS's, I think I get that one, but why say "base 38" instead of it's corresponding IOS?
     
  4. AaronZ

    Member AaronZ GBAtemp Regular

    Joined:
    Mar 22, 2012
    Messages:
    183
    Country:
    United Kingdom
    My DML says 2.6+ yet I'm on 2.9 (I assume you're using DM for USB storage which is why it's 2.6.1+), so yeah that's why it says that.

    I've had the same d2xv8final for years with no compatibility issues. What games are causing problems? For the record here's mine:

    Code:
    IOS202[60] (rev 65535, Info: hermes-v5.0): Trucha Bug, NAND Access, USB 2.0
    IOS222[38] (rev 65535, Info: hermes-v5.0): Trucha Bug, ES Identify, NAND Access, USB 2.0
    IOS223[37] (rev 65535, Info: hermes-v5.0): Trucha Bug, NAND Access, USB 2.0
    IOS224[57] (rev 65535, Info: hermes-v5.0): Trucha Bug, NAND Access, USB 2.0
    IOS236[36] (rev 65535, Info: rev 3351): Trucha Bug, ES Identify, NAND Access
    IOS249[56] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS250[57] (rev 21008, Info: d2x-v8final): Trucha Bug, NAND Access, USB 2.0
    IOS254 (rev 65281): BootMii
     
  5. scooby74029

    Member scooby74029 "fake coder"

    Joined:
    May 7, 2010
    Messages:
    1,174
    Location:
    oklahoma, USA
    Country:
    United States
    i use uneek to play all my games because of the 100 percent compatibility that uneek offers with wii games and channel games
     
  6. portugeek
    OP

    Member portugeek GBAtemp Fan

    Joined:
    Apr 6, 2013
    Messages:
    345
    Country:
    United States
    Most of my problems are coming from VC and WiiWare games I'm running from emuNAND. The only problem I'm having outside of emuNAND is with DM and Phantasy Star Online Episode I & II. Which seems to be a problem a lot of people are having.

    100% compatibility sounds awesome! I just finished looking into uneek. Can I create everything I need outside of the Wii? Do I need to install anything to the Wii's internal memory to get this to work?

    EDIT: Also, when I see that a certain game runs off a specific IOS, but that IOS on my Wii says "no patch", does that matter? Or does it mean that that game just needs that IOS to exist in some fashion?
     
  7. scooby74029

    Member scooby74029 "fake coder"

    Joined:
    May 7, 2010
    Messages:
    1,174
    Location:
    oklahoma, USA
    Country:
    United States
    as long as you have bootmii installed it will work and i can give you a link to a channel that will launch it from the sys menu
    for uneek you dont use cios the games use the ios they are meant to
    use modmii go to the settings and change it from neek20 to regular neek(if you want to)choose uneek+di
    neek20 is an alternative that will use the .wbfs files you already have (not sure on compatibility with it)
    then you can use my gameconverter to convert your games from .wbfs to neek format
    your HD needs to be setup specifically to FAT32 and 32kb on partion 1 i also have a nand dumper program that will dump your nand straight to your usb HD
    modmii and game converter and nand dumper are in my sig

    also you have unlimited room for saves and if you play rock band or just dance or anything like that
    you can have all the DLC on there to it just depends on size of HD
     
  8. portugeek
    OP

    Member portugeek GBAtemp Fan

    Joined:
    Apr 6, 2013
    Messages:
    345
    Country:
    United States
    I'm currently under the impression that UNEEK is an app that emulates the Wii without modifying my current configuration. Would installing UNEEK require any part of my Wii's internal memory to be modified? Or does it run completely and independently on my USB device?
     
  9. portugeek
    OP

    Member portugeek GBAtemp Fan

    Joined:
    Apr 6, 2013
    Messages:
    345
    Country:
    United States
    I'm worried because Modmii says that UNEEK+DI will disable the DVD Drive for games but not apps. When it talks about disabling the DVD drive, does it mean while I'm accessing the emuNAND from within UNEEK? Or does it mean that for me to be able to run UNEEK it'll have to disable my DVD Drive on my Wii all together?
     
  10. scooby74029

    Member scooby74029 "fake coder"

    Joined:
    May 7, 2010
    Messages:
    1,174
    Location:
    oklahoma, USA
    Country:
    United States
    completely indendent
     
  11. scooby74029

    Member scooby74029 "fake coder"

    Joined:
    May 7, 2010
    Messages:
    1,174
    Location:
    oklahoma, USA
    Country:
    United States

    only when using uneek +di other option is just uneek without di is for playing retail discs but having saves and channels working with uneek
     
  12. portugeek
    OP

    Member portugeek GBAtemp Fan

    Joined:
    Apr 6, 2013
    Messages:
    345
    Country:
    United States
    AWESOME! I feel so much more confident in trying this now.
     
  13. scooby74029

    Member scooby74029 "fake coder"

    Joined:
    May 7, 2010
    Messages:
    1,174
    Location:
    oklahoma, USA
    Country:
    United States
    if you need help i will be around working on new program today
     
    portugeek likes this.
  14. portugeek
    OP

    Member portugeek GBAtemp Fan

    Joined:
    Apr 6, 2013
    Messages:
    345
    Country:
    United States
    I'm using the Google CompleteSoftModGuide for SNEEK and I'm having problems. IOSKpatch can't run successfully because it says my pc is missing msvcr100.dll. When I try to install Microsoft Visual C++ 2010 Redistributable Package" I can't because Vista says I have a newer version of MVC++ already installed.

    Not sure how to continue.. Is there a more recent guide I could use?
     
  15. scooby74029

    Member scooby74029 "fake coder"

    Joined:
    May 7, 2010
    Messages:
    1,174
    Location:
    oklahoma, USA
    Country:
    United States
    easier way is to have modmii download all needed files for you ill give you a step by step

    ok start modmii go to bottom and click the button for modmii classic
    hit next and i agree again
    press o for options and check if n20 is disabled if not press n2o and hit enter to disable it then s to save press enter then press m press enter to go back to main screen
    then when it comes up press s enter
    then 1 enter
    if asked what rev choose 192
    then ud (for uneek+di) press enter
    then press( d for default save) press enter( once for sd)
    then press( d for default save) press enter (next usb)
    then press y press enter
    wait for it to download
    then open the copy to sd folder and copy everything to the root of sd(in this folder there is a folder called bootmiineek rename it bootmii)
    then open the copy to usb folder and copy everything to root of usb
     
  16. portugeek
    OP

    Member portugeek GBAtemp Fan

    Joined:
    Apr 6, 2013
    Messages:
    345
    Country:
    United States
    Alright so Modmii is probably one of the most enjoyable experiences ever! :) But now that I have everything on my SD and USB I can't get it to work.

    First.. I don't even know where to go to even get it to start. I started postloader and at the bottom of the screen it has an Icon that says "Neek" so I pressed that and the screen turns black and the wii drive just flashes and regular intervals. Other than that, or possibly having some sort of channel installed.. I have no idea how to do.
     
  17. scooby74029

    Member scooby74029 "fake coder"

    Joined:
    May 7, 2010
    Messages:
    1,174
    Location:
    oklahoma, USA
    Country:
    United States
    easiest thing to do is go to HBC press home button and launch bootmii did you put you nand files on the usb ?
    here is link to channel to launch from sys menu
    http://www.mediafire.com/?gyek1gogiddk0no
    install wad then just start channel
     
  18. portugeek
    OP

    Member portugeek GBAtemp Fan

    Joined:
    Apr 6, 2013
    Messages:
    345
    Country:
    United States
    I didn't install the wad yet because I wanted to make sure all the basics were taken care of. Launching bootmii from HBC isn't working either. The screen stays black.. and then the drive starts flashing. But there's no activity on the USB side. Everything's where it should be (as far as I know).

    (Noob question) Is there a chance I don't have bootmii installed?

    EDIT: sysCheck says I have Boot2 v3 if that helps
     
  19. scooby74029

    Member scooby74029 "fake coder"

    Joined:
    May 7, 2010
    Messages:
    1,174
    Location:
    oklahoma, USA
    Country:
    United States
    no you have it according to your syscheck
    ok sd card should have these folders and files
    bootmii - folder
    armboot.bin -file
    sneek - folder
    kernel.bin - file

    usb should have ...
    sneek - folder
    font.bin - file
    kernel.bin
    di.bin

    import - folder
    meta - folder
    shared1 - folder
    shared2 - folder
    sys - folder
    ticket - folder
    title - folder
    tmp - folder

    are yours setup this way?
     
  20. portugeek
    OP

    Member portugeek GBAtemp Fan

    Joined:
    Apr 6, 2013
    Messages:
    345
    Country:
    United States
    Alright.. So I've tried a few different things.

    I used Modmii to generate a clean nand and to create the Sneek files. That worked, but not the first time, and I don't know why. Then I went and replaced the clean nand that Modmii created with my own EmuNand. That didn't work.. So I went back to the Modmii's clean nand and used ShowMiiWads to install all my wads to the clean nand. That didn't work.

    I'm gonna try one more time running everything clean.. then booting up and going through initial config again. Then I'll try reinstalling wads. Is there some kind of wad limit?
     

Share This Page