Toggle sidebar

Homebrew Homebrew app sys-patch - sysmod that patches on boot

BaamAlex said:
tried both sig patches and sys patch however i cant seem to get sys-patch to stay enabled through deep sea tools or tesla. as far as i know i have the latest sig patches for hekate and atmosphere. my switch original firmware and custom firmware are both upgraded to 18.1.0 also.
Click to expand...
 
ive been thinking of doing a fresh install but idk if this will solve the issue id assume so but was really hoping to avoid doing it. so odd cause originally the file was an xci with 74 dlcs now i cant install any copy of xenoverse 2, including the copy i bought from the shop... im wondering if the xci just left a file somewhere that just didnt erase or maybe a config file was modified and now wont allow me to use nsp or xci version of this game... idk but everything else seems to be working except this 1 game. so odd. i have latest hekate and atmosphere installed both running on custom firmware 18.1.0 as i mentioned so idk whats wrong.
Post automatically merged:

ive also tried installing xenoverse 2 through dbi, awoo installer, and tinfoil 18.0.0. none have seemed to work.
 
Last edited by John403,
John403 said:
ive been thinking of doing a fresh install but idk if this will solve the issue id assume so but was really hoping to avoid doing it. so odd cause originally the file was an xci with 74 dlcs now i cant install any copy of xenoverse 2, including the copy i bought from the shop... im wondering if the xci just left a file somewhere that just didnt erase or maybe a config file was modified and now wont allow me to use nsp or xci version of this game... idk but everything else seems to be working except this 1 game. so odd. i have latest hekate and atmosphere installed both running on custom firmware 18.1.0 as i mentioned so idk whats wrong.
Post automatically merged:

ive also tried installing xenoverse 2 through dbi, awoo installer, and tinfoil 18.0.0. none have seemed to work.
Click to expand...
Are you using SysDVR with patches?
 
  • Like
Reactions: impeeza
NotUsingAnAltAccount said:
This is the only thing that comes to my mind. Double check it you have 'am' folder inside 'atmosphere/exefs_patches'. If yes then delete it, reboot your Switch and game should work.
Click to expand...
1718261660291.png

Post automatically merged:

John403 said:
1718261660291.png
Click to expand...
unfortunately not that i can find thank you tho i checked right away
 
NotUsingAnAltAccount said:
I have no idea then. How did you dump your game? Try again maybe
Click to expand...
i got the file from a website but the file has been taken down from the site =/ unfortunately i deleted my copy i had saved on my tb harddrive to.... i installed it originally using awoo installer and uninstalled throu the system settings where data management is. i guess i shudnt have done it lol cause every file i try now fails to open. i tried different sources including the eshop different xci different nsp nothing lol so its looking like a complete reset maybe idk. i even tried deleted save data after using jdsk i think it was to make a backup thinking maybe the save file was corrupt but nope still wont load. so yea idk wat i gotta do. maybe i need to update sys modules for firmware 18.1.0 idk.
Post automatically merged:

John403 said:
i got the file from a website but the file has been taken down from the site =/ unfortunately i deleted my copy i had saved on my tb harddrive to.... i installed it originally using awoo installer and uninstalled throu the system settings where data management is. i guess i shudnt have done it lol cause every file i try now fails to open. i tried different sources including the eshop different xci different nsp nothing lol so its looking like a complete reset maybe idk. i even tried deleted save data after using jdsk i think it was to make a backup thinking maybe the save file was corrupt but nope still wont load. so yea idk wat i gotta do. maybe i need to update sys modules for firmware 18.1.0 idk.
Click to expand...
wats odd is every other sys module im using is enabled but as soon as i try sys-patch it enables for like 5secs then turns off... is this normal?
 
John403 said:
i got the file from a website but the file has been taken down from the site =/ unfortunately i deleted my copy i had saved on my tb harddrive to.... i installed it originally using awoo installer and uninstalled throu the system settings where data management is. i guess i shudnt have done it lol cause every file i try now fails to open. i tried different sources including the eshop different xci different nsp nothing lol so its looking like a complete reset maybe idk. i even tried deleted save data after using jdsk i think it was to make a backup thinking maybe the save file was corrupt but nope still wont load. so yea idk wat i gotta do. maybe i need to update sys modules for firmware 18.1.0 idk.
Click to expand...
Did you try going into the maintenance mode in order to clear the system cache? If not, do the following:

If you're using OFW and/or sysNAND CFW:

  1. Make sure that your Internet connection is disabled if you're connected right now and remove any saved connections as well (unless you have DNS MITM in place).
  2. Turn off your console (when in home menu, hold the power button for a few seconds and select power off).
  3. Hold volume + and volume - at the same time and, while holding them, press the power button. After a while your Switch will enter into the maintenance mode. At this point any pending updates and cache is cleared on your sysNAND, you don't need to press and/or select anything.
  4. Press the power button once again. It'll shut down the console.
  5. Reboot to your sysNAND CFW the way you usually do and make sure to activate flight mode. (Connecting to the Internet is safe only if you have 90DNS or DNS MITM in place.
if you're using emuNAND CFW, it's a bit different:

  1. Make sure that your Internet connection is disabled if you're connected right now and remove any saved connections as well (unless you have DNS MITM in place).
  2. Turn off your console (when in home menu, hold the power button for a few seconds and select power off).
  3. Right before you send your fusse.bin payload, hold volume + and volume - at the same time. Keep holding until you get into maintenance mode (you'll see Atmosphere bootlogo first, Switch logo after that one). After a while your Switch should enter into the maintenance mode. At this point any pending updates and cache is cleared on your emuNAND, you don't need to press and/or select anything.
  4. Press the power button once again. It'll shut down the console.
  5. Reboot to your emuNAND CFW the way you usually do and make sure to activate flight mode. (Connecting to the Internet is safe only if you have 90DNS or DNS MITM in place.
If that doesn't help, try installing the game with DBI instead. I never had an issue with it. Here's a video tutorial on how to use it.
Otherwise, check this thread for more troubleshooting info.

John403 said:
wats odd is every other sys module im using is enabled but as soon as i try sys-patch it enables for like 5secs then turns off... is this normal?
Click to expand...
Indeed. sys-patch patches whatever it needs to and then it turns off.
 
Blythe93 said:
Did you try going into the maintenance mode in order to clear the system cache? If not, do the following:

If you're using OFW and/or sysNAND CFW:

  1. Make sure that your Internet connection is disabled if you're connected right now and remove any saved connections as well (unless you have DNS MITM in place).
  2. Turn off your console (when in home menu, hold the power button for a few seconds and select power off).
  3. Hold volume + and volume - at the same time and, while holding them, press the power button. After a while your Switch will enter into the maintenance mode. At this point any pending updates and cache is cleared on your sysNAND, you don't need to press and/or select anything.
  4. Press the power button once again. It'll shut down the console.
  5. Reboot to your sysNAND CFW the way you usually do and make sure to activate flight mode. (Connecting to the Internet is safe only if you have 90DNS or DNS MITM in place.
if you're using emuNAND CFW, it's a bit different:

  1. Make sure that your Internet connection is disabled if you're connected right now and remove any saved connections as well (unless you have DNS MITM in place).
  2. Turn off your console (when in home menu, hold the power button for a few seconds and select power off).
  3. Right before you send your fusse.bin payload, hold volume + and volume - at the same time. Keep holding until you get into maintenance mode (you'll see Atmosphere bootlogo first, Switch logo after that one). After a while your Switch should enter into the maintenance mode. At this point any pending updates and cache is cleared on your emuNAND, you don't need to press and/or select anything.
  4. Press the power button once again. It'll shut down the console.
  5. Reboot to your emuNAND CFW the way you usually do and make sure to activate flight mode. (Connecting to the Internet is safe only if you have 90DNS or DNS MITM in place.
If that doesn't help, try installing the game with DBI instead. I never had an issue with it. Here's a video tutorial on how to use it.
Otherwise, check this thread for more troubleshooting info.


Indeed. sys-patch patches whatever it needs to and then it turns off.
Click to expand...
yea i tried the maintenance mode too and still not working, also tried DBI, it did tell me my file was orrupt and even tried installing it but when it finished the switch had to update the file... still did not work, i then uninstalled the file and reinstalled using eshop and still wont boot, tryed updating with the dlcs through tinfoil and stil wont work. i think im gonna need to do a complete reinstall. doesnt seem like i can get around this. i even checked for sys module update and im on v1.2.2-9b114b3 far as i know its the latest release. still cant get this game to load lol so annoying.
Post automatically merged:

John403 said:
yea i tried the maintenance mode too and still not working, also tried DBI, it did tell me my file was orrupt and even tried installing it but when it finished the switch had to update the file... still did not work, i then uninstalled the file and reinstalled using eshop and still wont boot, tryed updating with the dlcs through tinfoil and stil wont work. i think im gonna need to do a complete reinstall. doesnt seem like i can get around this. i even checked for sys module update and im on v1.2.2-9b114b3 far as i know its the latest release. still cant get this game to load lol so annoying.
Click to expand...
i will however try maintenance mode 1 more time since messing with stuff just incase. ill do so right now! fingers crossed!
 
  • Like
Reactions: Blythe93
NotUsingAnAltAccount said:
Try 'Cleanup orphaned files' in DBI and then installing the game one more time.
Click to expand...
okie dokie will try now! also maintenance mode didnt work to solve issue just tried after removing all my connections data and turned off my wifi still no good.
Post automatically merged:

k so DBI cleanup orphaned files did find files! these have been deleted! it didnt solve the issue so i completely uninstalled xenoverse 2 again and then ran DBI cleanup again. ths found more files and deleted them! now reinstalling xenoverse again! my internet is slow so it could be a bit b4 i respond.
 
Last edited by John403,
  • Like
Reactions: Blythe93
and still not working. dbi installed the file 100% no issue through it but still wont open on my switch without closing instantly. doesnt even pop up nintendo switch logo so odd.
 
John403 said:
and still not working. dbi installed the file 100% no issue through it but still wont open on my switch without closing instantly. doesnt even pop up nintendo switch logo so odd.
Click to expand...
Upgrade to latest Hekate, Atmosphère, Sigpatches and SYS-Patch to recent versions, some has been released on the lasts hours.
 
can u private message me these updates? like the sites i can find the right ones cause i have so many copys o hekate 6.2.0 and atmosphere 1.7.1, i currently have sig patches from a package called "Hekate+AMS-package3-sigpatches-1.7.1-cfw-18.1.0" and sys-patch for 1.5.2. so if im missing something could u please let me know. i also havee the latest fusee i believe. it was on the github site for the atmosphere update.
 
John403 said:
can u private message me these updates? like the sites i can find the right ones cause i have so many copys o hekate 6.2.0 and atmosphere 1.7.1, i currently have sig patches from a package called "Hekate+AMS-package3-sigpatches-1.7.1-cfw-18.1.0" and sys-patch for 1.5.2. so if im missing something could u please let me know. i also havee the latest fusee i believe. it was on the github site for the atmosphere update.
Click to expand...
They are on the respective pages:

https://github.com/Atmosphere-NX/Atmosphere/releases
https://github.com/CTCaer/Hekate/releases
https://gbatemp.net/threads/sigpatches-for-atmosphere-hekate-fss0-fusee-package3.571543/ (on the OP)
https://gbatemp.net/download/sys-patch-1-5-2-binary-fw-18-1-0-atmosphere-1-7-1.38686/

extract all zip files and copy to the root of your sd card,
 
  • Like
Reactions: Tyvar1, champsblinder02, fatherjack and 1 other person
so i was missing the latest version of hekate i guess as you mentioned it was updated again while ive been troubleshooting this problem. everything else tho i had. just put in the new copy of hekate 6.2.0 from the github source and restarted my switch, again the game wouldnt launch however it said an update was found this time so ill try launching the game after the update. my net is super slow tho so its gunna take like 3hrs. fingers crossed! cause if this doesnt work im starting from fresh.
Post automatically merged:

still not opening still says the software closed because an error occured lol idk guys im kinda stumped
Post automatically merged:

So I decided to try updating the games via nsp to version 1.22 of xenoverse 2 through dbi and I got this. Now the game wasn't working b4 hand but I'm assuming this could be a reason y.
Post automatically merged:

And upon exiting dbi now xenoverse says important files were missing and is downloading them now 🙏
Post automatically merged:

Wat can I say I don't like giving up haha 😅 plus everything else is working soo that would be alot my switch has had done to it id have to configure all over so I don't really wanna do that.
 

Attachments

  • 20240614_003103.jpg
    20240614_003103.jpg
    564.9 KB · Views: 67
Last edited by John403,
  • Like
Reactions: Blythe93
John403 said:
so i was missing the latest version of hekate i guess as you mentioned it was updated again while ive been troubleshooting this problem. everything else tho i had. just put in the new copy of hekate 6.2.0 from the github source and restarted my switch, again the game wouldnt launch however it said an update was found this time so ill try launching the game after the update. my net is super slow tho so its gunna take like 3hrs. fingers crossed! cause if this doesnt work im starting from fresh.
Post automatically merged:

still not opening still says the software closed because an error occured lol idk guys im kinda stumped
Post automatically merged:

So I decided to try updating the games via nsp to version 1.22 of xenoverse 2 through dbi and I got this. Now the game wasn't working b4 hand but I'm assuming this could be a reason y.
Post automatically merged:

And upon exiting dbi now xenoverse says important files were missing and is downloading them now 🙏
Post automatically merged:

Wat can I say I don't like giving up haha 😅 plus everything else is working soo that would be alot my switch has had done to it id have to configure all over so I don't really wanna do that.
Click to expand...

Please rotate future images to the proper orientation before uploading. I think your file/source may be bad. Also, perhaps using split file is causing problems? And you're installing xci's/nsps and then going online to allow them to update from the eshop???? :O
 

Site & Scene News

Go to forum More news

Popular threads in this forum

Dusk for switch (TLoZ Twilight Princess port)

Homebrew  New Homebrew "Foil Server"?

Homebrew  Full List of N64 Recompilation Switch ports

Hacking  WiFi chip failing and can't boot. is it possible to enable Airplane Mode by editing system save files directly?

Homebrew Tutorial Translation Project  CS2SX — Write Nintendo Switch Homebrew in C#

Homebrew  Sonic Unleashed Recompiled (Homebrew Port)

Is it fixable

Hacking Emulation  Switch Prod Keys downloading from sites okay?