Homebrew RELEASE sys-netcheat - Simple open-source cheat-engine.

[jakibaki]

Cool! The corruption warnings on the github page are no longer a thing?

I haven't experienced any corruption with RajNX so far so the problem may just have been bad sigpatches.

Though the warning stays up for now just in case.

 

[Timnor]

For the SX OS users, I made it work as follows; install RajNX to the SD, compile (or download) sys-netcheat.kip, place it in the modules folder.
Edit the rajnx_ipl.ini file and include following:
[RajNX CFW sys-netcheat]
kip1patch=nosigchk
kip1=RajNX/loader.kip
kip1=RajNX/sm.kip
kip1=modules/sys-netcheat.kip
fullsvcperm=1
debugmode=1
Boot SX OS, hold the volume + go to options and load the rajnx_ipl.bin file, choose CFW and then RajNX CFW sys-netcheat.
Do note, I can only use this with installed NSP's (legit or otherwise), as far as I can tell, you can't load an xci in anything but SX OS.
(if anyone has any better way, please feel free to correct me; this may or may not work with other packages such as Reinx, but I haven't tried).

Now if you'll excuse me, if have to donate myself some more Stardew valley stuff

any idea why on the cmd prompt i get host not found? using tx os. i only followed your steps, is there something else i need to install?

 

[mezz0]

are you sure you are entering the correct IP address of the switch ?
and your switch is NOT IN AIRPLANE MODE ?
(try to ping the ip of the switch to see if it is on the network)

EDIT: there is nothing more to install. the steps I wrote should suffice.

 

[shine3012]

C:\Users\Shine\Desktop>nc
Cmd line: nc 192.168.1.133 5555
nc: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>nc64
Cmd line: nc 192.168.133 5555
nc: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>ping 192.168.1.133 -t
Pinging 192.168.1.133 with 32 bytes of data:
Reply from 192.168.1.133: bytes=32 time=1ms TTL=64
Reply from 192.168.1.133: bytes=32 time=32ms TTL=64


please, help me.

 

[jakibaki]

C:\Users\Shine\Desktop>nc
Cmd line: nc 192.168.1.133 5555
nc: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>nc64
Cmd line: nc 192.168.133 5555
nc: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>ping 192.168.1.133 -t
Pinging 192.168.1.133 with 32 bytes of data:
Reply from 192.168.1.133: bytes=32 time=1ms TTL=64
Reply from 192.168.1.133: bytes=32 time=32ms TTL=64


please, help me.

nc64 192.168.1.133 5555

The 'nc' in the readme is the executable name. In your case that's nc64.

 

[shine3012]

same error
"nc64 192.168.1.133 5555" not work

 

[jakibaki]

same error
"nc64 192.168.1.133 5555" not work

please post a screenshot/copy of your command line output after running the following:

dir
nc64 192.168.1.133 5555

 

[mezz0]

I'm not sure if nc64 has the -v option for verbose output (on linux it does), perhaps try that and see if the error gets more descriptive ?

EDIT: try and switch off your windows firewall and/or anti-malware, it might be intercepting the netcat traffic and preventing windows from opening a socket.

 

[Supreme23]

@Supreme23 It's up on github. This version has serious issues - but hey it works!

It's on github, still can't post links so here is the github directory:

/Colassal/HAnX-Remote-Client/releases/tag/1.2.0

Thanks, this works. Just got to figure out how to change the values in game. Was trying to change a value of 1100 to 999,999,999. Got it down to one hit then poked the value to change it but I believe I put the value in wrong because nothing changed. ​

 

[shine3012]

please post a screenshot/copy of your command line output after running the following:

dir
nc64 192.168.1.133 5555

C:\Users\Shine\Desktop>nc
Cmd line: dir
dir: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>nc64
Cmd line: dir
dir: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>nc64
Cmd line: nc64 192.168.1.133 5555
nc64: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>

i tried turn off firewall and anti viruss

 

[blurx]

C:\Users\Shine\Desktop>nc
Cmd line: dir
dir: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>nc64
Cmd line: dir
dir: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>nc64
Cmd line: nc64 192.168.1.133 5555
nc64: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>

i tried turn off firewall and anti viruss

You don't type nc in the beginning. Once you are in the directory, you just type "nc ip 5555".

 

[jakibaki]

C:\Users\Shine\Desktop>nc
Cmd line: dir
dir: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>nc64
Cmd line: dir
dir: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>nc64
Cmd line: nc64 192.168.1.133 5555
nc64: forward host lookup failed: h_errno 11001: HOST_NOT_FOUND
C:\Users\Shine\Desktop>

i tried turn off firewall and anti viruss

you need to run the commands from an cmd, not from nc itself...

 

[Supreme23]

same error
"nc64 192.168.1.133 5555" not work

Use this instead
https://github.com/Colassal/HAnX-Remote-Client​

 

[HheuerZzhang]

cool! great job.
just wondering can we develop a GUI on PC end or better on phone(Android)
And, if able to add function for address/value passing that will be great.

 

[Timnor]

thanks supreme that one connects

 

[jakibaki]

cool! great job.
just wondering can we develop a GUI on PC end or better on phone(Android)
And, if able to add function for address/value passing that will be great.

I'll not be working on an gui. (if anyone else wants to I'll gladly link it in the main post)

What do you mean by address/value passing?

 

[mezz0]

What do you mean by address/value passing?

I'm guessing he wants to peek max health and poke it into current health, in one instruction

 

[Timnor]

anyone have a trick to narrow down results? trying to edit a titanquest save, when searching values i get a massive list, using csearch doesnt seem to narrow it down any, after awhile i cant search anymore with it.

 

[HheuerZzhang]

Use this instead
https://github.com/Colassal/HAnX-Remote-Client​

I try out your exe, working, but with some problem
can't ssearch then csearch out for some value/address, but that is working with cmd.exe(win7 64bit original)

--------------------- MERGED ---------------------------

I'm guessing he wants to peek max health and poke it into current health, in one instruction

Yes, that's what I mean.

 

[Supreme23]

I try out your exe, working, but with some problem
can't ssearch then csearch out for some value/address, but that is working with cmd.exe(win7 64bit original)

@Colassal can help you with that​

--------------------- MERGED ---------------------------

Great app @jakibaki still figuring out how to use it but the potential is

If you can get this working smoothly like cheat engine for pc this will be ​