Question Switch Lite Black Screen

By Soapyme, Nov 25, 2020 686 6 0

  1. Soapyme

    OP Soapyme Member
    Newcomer
    Level 1

    Joined:
    Jul 16, 2020
    Messages:
    15
    Country:
    United Kingdom
    After SX lite install I sometimes get a black screen after the SXOS splash screen when cold booting to emunand. When this happens I have to do a hard reset of the switch lite and try again. The next time it boots emunand fine. Software is 10.2.0 and SXOS is 3.0.5. Anyone else have this issue?
     
  2. 0reo

    0reo Member
    Newcomer
    Level 5

    Joined:
    Jul 30, 2012
    Messages:
    26
    Country:
    United States
    Are you able to monitor the lights on the SX lite chip during boot? If it is green each time, I would try another SD card if possible.
     
  3. Soapyme

    OP Soapyme Member
    Newcomer
    Level 1

    Joined:
    Jul 16, 2020
    Messages:
    15
    Country:
    United Kingdom
    I can't see the light on the chip with the back on but assume that it is green as I'm getting to the SXOS splash screen every time. It's just loading the emunand that is the issue. Sometimes it boots fine and others it just stays on a black screen and requires a hard reset to get out of
     
  4. Soapyme

    OP Soapyme Member
    Newcomer
    Level 1

    Joined:
    Jul 16, 2020
    Messages:
    15
    Country:
    United Kingdom
    Ok I tried a different SD card created a new Emunand and is now booting fine. Thanks for your help
     
    Hologram likes this.
  5. Hologram

    Hologram GBAtemp Fan
    Member
    Level 3

    Joined:
    Nov 27, 2020
    Messages:
    308
    Country:
    United States
    This is quite common on 10.2 / 3.05 - Samsungs do this the most. TX has known about the issue. I have a 512gb that rarely does this and I have an identical 512gb that takes 3-5 boots to load. Lets see if TX will fix this with 3.06.
     
  6. Soapyme

    OP Soapyme Member
    Newcomer
    Level 1

    Joined:
    Jul 16, 2020
    Messages:
    15
    Country:
    United Kingdom
    Lets hope so. My original SD card was a 256GB mymemory SD card. Now using a sandisk 128GB and I have no issues. Would be nice to use the bigger card again though
     
    Hologram likes this.
  7. Hologram

    Hologram GBAtemp Fan
    Member
    Level 3

    Joined:
    Nov 27, 2020
    Messages:
    308
    Country:
    United States

    So far all cards work for me just some take a few tries to boot. Emunand that is. 1TB micro works.
     
(You must log in or sign up to post here.)
Check for new posts
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Switch, Screen, Black

  1. SadmanD

    Question Switch black screens and shuts off when trying to use Haku33

    SadmanD, Jan 14, 2021 at 6:16 PM, in forum: Switch - Exploits, Custom Firmwares & Soft Mods
    Replies:
    4
    Views:
    277
    SadmanD
    Jan 14, 2021 at 8:02 PM
  2. h-run08

    nintendo switch not turning on black screen

    h-run08, Dec 27, 2020, in forum: Switch - Console, Accessories & Hardware
    Replies:
    3
    Views:
    731
    Pikaguh
    Dec 28, 2020
  3. ethangraham456

    Switch boots to Nintendo logo then black screen after rebuilding NAND

    ethangraham456, Dec 11, 2020, in forum: Switch - Exploits, Custom Firmwares & Soft Mods
    Replies:
    5
    Views:
    720
    ethangraham456
    Dec 12, 2020
  4. TeusSwitch124

    Nintendo Switch R4S Black Screen

    TeusSwitch124, Jul 21, 2020, in forum: Switch - Backup Loaders & Modchips
    Replies:
    6
    Views:
    1,119
    Draxzelex
    Dec 6, 2020
  5. HollowSuperHylianHedgehog

    Question SXOS Switch Black Screen After Injecting Payload with license.dat

    HollowSuperHylianHedgehog, Jul 20, 2020, in forum: Switch - Exploits, Custom Firmwares & Soft Mods
    Replies:
    7
    Views:
    1,524
    BaamAlex
    Dec 5, 2020