1. eflem21

    OP eflem21 Newbie
    Newcomer

    Joined:
    Nov 24, 2018
    Messages:
    1
    Country:
    Germany
    Hello,

    I accidentally updated to 6.2 and tried to downgrade using my 5.1 nand backup. After restoring my nand I tried to use a fuse-check bypassing bootloader. And here comes the supid part: I used the fusee-secondary.bin file as payload. Since then there is no response from the switch, no rcm, no boot, no maintenance mode. The only thing response I get is when using the dock the green LED goes on and almost immediately turns off.
    Has someone got an idea on what to do? Thanks in advance.
     
  2. WadsRUs

    WadsRUs GBAtemp Regular
    Member

    Joined:
    Jun 12, 2009
    Messages:
    225
    Country:
    United Kingdom
    I don't have an answer I'm afraid but I'd also be interested in a solution (I recently bought a cheap faulty Switch in the hope that I could get it working but it does the exact same thing as yours - the charging port is fine and it will charge the battery, but the Switch itself is apparently dead, maybe the previous owner was playing around with the firmware and corrupted it).
     
    Last edited by WadsRUs, Nov 24, 2018
    thorasgar likes this.
  3. Pippin666
    This message by Pippin666 has been removed from public view by porkiewpyne, Nov 25, 2018.
    Nov 25, 2018 Show
  4. jakkal

    jakkal GBAtemp Addict
    Member

    Joined:
    Apr 27, 2018
    Messages:
    2,281
    Country:
    United States
    Maybe you could try RCM instead of RMC
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - respond, Switch,