Hacking Supercard Lite Q.

[KINGOFNOOBS]

Anyway to fix the problem with it being hard to put in and out of the DS Lite. Sorta annoying..

 

[DownwardSpyral]

I've heard some people try sanding it down or repeatedly insert/remove it to wear it down a bit

 

[KINGOFNOOBS]

Sanding as in with sand paper? Where? Tutorials? Move info?

 

[omegatr0n]

you have to take it out on the left side...then the right..then the left then the right and it will come out

 

[FifthE1ement]

Here you go bud:

http://scdev.org/forum/viewtopic.php?t=5674&start=15

OK Guys... since I have a few of the Supercard Lites now, I decided to do a sanding experiment. I sanded the left and right sides, and the back. I first started using 320 grit and then finished it off with 600 grit. You cannot tell it was even sanded at all. Seems the 600 finish on it makes it nice and smooth... even more so than the original finish. Now my Supercard Lite goes in and out like butter. It is exactly now how the Supercard MiniSD model is. Pulls in and out very easy, but still stays locked in place. This is the way to go guys.

You can get the grit sandpaper at Home Depot or any hardware store I am sure. I would also suggest using a can of compressed air to blow out any sanding residue from the chips... just to be on the safe side.

There are a few more comments on there as well.

Hope all works well,

FifthE1ement