Hacking Stuck on System Update with Luma?

[RobinMeade]

Following the guide and it says to update

Update your device by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”

• Updates while using B9S + Luma (what you have) are safe
• The updater may display a message saying “Your system is up to date” instead of updating. This is normal if you are already up to date; continue with the next section
• If this gives you an error, set your DNS settings to “auto”
• If this still gives you an error, follow CTRTransfer, then try updating again

From reading it I assume I should be able to update off SD card, however the only option is to update through the internet?? There is no photo clues what I should see therefore I am lost if I am at right point and should I update off SD?

 

[Shadow#1]

Following the guide and it says to update

Update your device by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”

• Updates while using B9S + Luma (what you have) are safe
• The updater may display a message saying “Your system is up to date” instead of updating. This is normal if you are already up to date; continue with the next section
• If this gives you an error, set your DNS settings to “auto”
• If this still gives you an error, follow CTRTransfer, then try updating again

From reading it I assume I should be able to update off SD card, however the only option is to update through the internet?? There is no photo clues what I should see therefore I am lost if I am at right point and should I update off SD?

Just update over the internet

 

[RobinMeade]

Just update over the internet

Should I setup the Internet connection then? I thought it updates From Luma folder on SD cards? It's not going to update to latest firmware and screw it all up?

 

[Shadow#1]

Should I setup the Internet connection then? I thought it updates From Luma folder on SD cards? It's not going to update to latest firmware and screw it all up?

What u currently on?

 

[RobinMeade]

5.0.0 11U

 

[Shadow#1]

5.0.0 11U

Wow that's old time to get up to current

 

[Shadow#1]

https://3ds.hacks.guide/installing-boot9strap-(soundhax)

 

[RobinMeade]

I already did all that, followed the instructions, it opened the menu, I check marked that one item they asked aaaaand now I'm stuck at the update issue

 

[Shadow#1]

I already did all that, followed the instructions, it opened the menu, I check marked that one item they asked aaaaand now I'm stuck at the update issue

Then just did system update via internet

 

[RobinMeade]

It's not going to update too high? I read the highest version is not hackable

 

[Lacius]

It's not going to update too high? I read the highest version is not hackable

If you already have B9S installed, it is safe to update to the latest version.

 

[Shadow#1]

It's not going to update too high? I read the highest version is not hackable

All system updates r hackable

 

[Shadow#1]

And u read wrong

 

[RobinMeade]

If you already have B9S installed, it is safe to update to the latest version.

How can I verify that is installed? What is guide asking for? I selected guide for ver 5.0 shouldn't I be able to finish by following the guide? No offence but you basically either ask me to veer off the guide or the guide skipped something?

 

[Shadow#1]

How can I verify that is installed? What is guide asking for? I selected guide for ver 5.0 shouldn't I be able to finish by following the guide? No offence but you basically either ask me to veer off the guide or the guide skipped something?

He didn't ask for u to veer from the guide at all

 

[Lacius]

How can I verify that is installed? What is guide asking for? I selected guide for ver 5.0 shouldn't I be able to finish by following the guide? No offence but you basically either ask me to veer off the guide or the guide skipped something?

What happens when you boot the system while holding Select?

Also, if you're still following the guide, finish the guide.

 

[RobinMeade]

And u read wrong

I guess you might be right. Now I see the thread I read it from is from 2017!

--------------------- MERGED ---------------------------

What happens when you boot the system while holding Select?

Nothing I tried to reboot system holding..... power? I found that somewhere, yikes! Let me try, with select. What am I supposed to see?

--------------------- MERGED ---------------------------

I see menu and "Show NAND or user string in System Settings" is x-ed (check marked?)

EDIT: On the bottom it says: "Booted from SD via B9S"

 

[Lacius]

I guess you might be right. Now I see the thread I read it from is from 2017!

--------------------- MERGED ---------------------------


Nothing I tried to reboot system holding..... power? I found that somewhere, yikes! Let me try, with select. What am I supposed to see?

--------------------- MERGED ---------------------------

I see menu and "Show NAND or user string in System Settings" is x-ed (check marked?)

EDIT: On the bottom it says: "Booted from SD via B9S"

That all means you have B9S and Luma3DS installed.

 

[RobinMeade]

That all means you have B9S and Luma3DS installed.

SO just download the update off the Internet? Is it going modify NAND on SD or the actual System NAND?
And why wouldn't they clarify it in the guide?

 

[Lacius]

SO just download the update off the Internet? Is it going modify NAND on SD or the actual System NAND?
And why wouldn't they clarify it in the guide?

The guide tells you to update online and that it's safe. Read the directions and follow the guide.