Hacking Steelhax Black Screen, payload.bin problem

[Abriil]

Hi! Well, i was trying to Homebrew my Old 3ds using Steelhax. Everything seems fine, all the folders and files are Ok. When i try to open Steel Diver, the screen freezes black. The problem seems to be the payload.bin, but i already tried everyting
My 3ds is 11.10.0.43U. Any other idea?
(Sorry for my bad english, it isn't my first language)

 

[KleinesSinchen]

You already tried everything? Then there is nothing left. Just kidding.

Your payload.bin should have the CRC32 checksum dc119395 (latest otherapp for old U models)

If your are absolutely sure you have the correct files correctly placed, maybe you haven't done this:

1. Backup everything from your SD card.
   
2. Reformat the SD to FAT32, 32kb cluster size, if bigger than 32GB and using Windows with guiformat.
3. Check the SD Windows, Linux, OS X.
   • If you get any errors replace the SD.
   • If you get no errors proceed by copying the needed files on.

Even if you get no errors, using a different SD might be worth a try.

In case you are not dead set against installing full custom firmware, you can use the Fredminer (Seedminer+Fredtool) method bypassing Steel Diver altogether. See the guide:
https://3ds.hacks.guide/

 

[Abriil]

Hmm... I tried to reformat the SD card, but it stills freezing. I will try to use the Fredminer method. Thanks!