Hacking Official [Source Release] ReiNand CFW

[usernametaken]

nope, when I insert the gw blue card, it asks to turn it off. guess I'll have to stick with my broken gw

Did you not install the Bluecardfix.cia originally? By broken, do you mean your Gateway red is no longer reading the mSD? If so, have you tried another mSD - Tried applying a piece of tap to the top of the mSD for a better contact / or a shim - checked the contacts to make sure they're clean? :|

 

[thaikhoa]

nope, when I insert the gw blue card, it asks to turn it off. guess I'll have to stick with my broken gw

Have you ever installed bluecardfix.cia? You could try to run PastaCFW using Cubic Ninja CIA on sysNand but I'm not sure if it will load properly. Then you can install FBI and install bluecardfix.cia as well.

 

[usernametaken]

Have you ever installed bluecardfix.cia? You could try to run PastaCFW using Cubic Ninja CIA on sysNand but I'm not sure if it will load properly. Then you can install FBI and install bluecardfix.cia as well.

He doesn't have Cubic Ninja unfortunately.

 

[joex11]

Did you not install the Bluecardfix.cia originally? By broken, do you mean your Gateway red is no longer reading the mSD? If so, have you tried another mSD - Tried applying a piece of tap to the top of the mSD for a better contact / or a shim - checked the contacts to make sure they're clean? :|

Yep, I managed to install the bluecardfix.cia and the mset after 100 tries. The gateway doesn't read the msd card, and if it does it's just for a minute or two. tried 5 sd cards, i didn't try applying anything on the top of the msd card since it would require removing the gateway plastic thing and i don't have nails for it. but I guess I will try these last two steps... ABout the contacts, I don't think so since it was giving me this error since the first time I used.

Have you ever installed bluecardfix.cia? You could try to run PastaCFW using Cubic Ninja CIA on sysNand but I'm not sure if it will load properly. Then you can install FBI and install bluecardfix.cia as well.

I already have FBI and BBM installed, but bluecardfix only installed through devmenu.3ds
I will try installing it one more time. I need to install it on sysnad w/ gateway right?

EDIT: BTW my gateway error is "filesystem error"

 

[usernametaken]

Yep, I managed to install the bluecardfix.cia and the mset after 100 tries. The gateway doesn't read the msd card, and if it does it's just for a minute or two. tried 5 sd cards, i didn't try applying anything on the top of the msd card since it would require removing the gateway plastic thing and i don't have nails for it. but I guess I will try these last two steps... ABout the contacts, I don't think so since it was giving me this error since the first time I used

You won't need to remove the gateway sticker, you could just try placing a small piece of electrical tape over the top of the mSD (The idea is to create more pressure on the contact points if it's not making a proper connection).

If you installed the bluecardfix, then you should be able to use your Blue Gateway. :|

 

[thaikhoa]

He doesn't have Cubic Ninja unfortunately.

He asked whether cubic ninja cia is enough so I assume that he's installed already

 

[usernametaken]

He asked whether cubic ninja cia is enough so I assume that he's installed already

As long as it's installed to the Sysnand, then I don't see why not. o_o

 

[joex11]

Let me try to explain my n3ds a little better:
I used to have a friend with sky3ds and cn, I installed pasta, fbi, bbm and games. Now he is far away and I don't have the CN anymore, but I have gw mset, so I can launch gw mode easily.
I can install any CIA and all, but my gw now is an expensive piece of mset launcher.

 

[usernametaken]

Let me try to explain my n3ds a little better:
I used to have a friend with sky3ds and cn, I installed pasta, fbi, bbm and games. Now he is far away and I don't have the CN anymore, but I have gw mset, so I can launch gw mode easily.
I can install any CIA and all, but my gw now is an expensive piece of mset launcher.

If you had installed a copy of Cubic Ninja to your Sysnand, then you can: Gateway menu > Gateway Sys > CN > Ninjhax > Reinand.

or Gateway sys > CN >Ninjhax > Pasta cfw > Ninjhax > Fbi > Try to reinstall Bluecardfix. So you can use your gateway blue card to install Reinands Mset.

But something to note, if you already have gateway mset setup, and can still boot into Gateway emunand, right now without your red cart working, it does most if not all that you can do on Reinand (Since you can use NTR 3.0 .cia along side the emunand)

 

[joex11]

If you had installed a copy of Cubic Ninja to your Sysnand, then you can: Gateway menu > Gateway Sys > CN > Ninjhax > Reinand.

or Gateway sys > CN >Ninjhax > Pasta cfw > Ninjhax > Fbi > Try to reinstall Bluecardfix. So you can use your gateway blue card to install Reinands Mset.

But something to note, if you already have gateway mset setup, and can still boot into Gateway emunand, right now without your red cart working, it does most if not all that you can do on Reinand (Since you can use NTR 3.0 .cia along side the emunand)

I just put some adhesive tape on my sd card and... it worked. you saved me 60$. now give me a hug

 

[Ghost]

Does the latest version work with Ninjhax?

 

[Spong92]

Does the latest version work with Ninjhax?

Yup works perfectly fine, it's what I'm doing until I get a ds flashcart

 

[clank]

Does the latest version work with Ninjhax?

Yes it does.

 

[Ghost]

Yup works perfectly fine, it's what I'm doing until I get a ds flashcart

Yes it does.

Spoiler: I get this error message:

 

[michyprima]

Hello Rei,

I've been experimenting with your source since you released it. Great work. Fascinating to say the least; I'm learning a lot from it.
One of my biggest issues with my jpn n3ds (turned european) was the non working eshop.

yifan_lu suggested the issue was the ctcert not matching the serial; so I dumped the ram from my old 3ds, and from my new 3ds, replacing the ctcert occurences using your injected arm9 thread.
This are the offset I found (for 9.5 firm):

memcpy((void*)0x01FFB804, patchctcert, 0x7c); // ctcert "ITCM" version
memcpy((void*)0x8095b34, patchctcert, 0x4); // u32 device id
memcpy((void*)0x80ef200, patchctcert, 0x4); // same as above
memcpy((void*)0x80df7c5, patchctcert, 0x4); // same as above
memcpy((void*)0x8095ba0, patchctcert2, 0x180); // ctcert "full" version
memcpy((void*)0x2f06a764, spr, 0x3); // product code (in my case, KTR)

Those however, are not enough. The error code changed, but the eshop is still not loading :/

Would love a clue from you, if you had any to share.

Thanks

 

[Spong92]

Spoiler: I get this error message:

View attachment 22712

Did you copy the contents of Reinand to the root of your SD? Sounds like that's where the issue may be

 

[Ghost]

Did you copy the contents of Reinand to the root of your SD? Sounds like that's where the issue may be

I got it to work now, but I get a black screen. Does emNAND need to be set up?

 

[Deleted-19228]

Any benefit to this over running PastaCFW other than MSET?

 

[Melon__Bread]

Any benefit to this over running PastaCFW other than MSET?

emuNAND == "Safer"

 

[usernametaken]

I got it to work now, but I get a black screen. Does emNAND need to be set up?

With the latest version released today, no. Imo you should setup emunand though.