Hacking Show us your Jig!

[yusuo]

Hey man, it was you I bought off on ebay right? You sent me a yellow and a white one

 

[Peacemaker]

i orderd from him too i hope it will work

 

[gamesquest1]

Hey man, it was you I bought off on ebay right? You sent me a yellow and a white one

yeah you got the ultra rare white version, didn't have much white filament left so didn't really add it as an option in the listing

 

[yusuo]

yeah you got the ultra rare white version, didn't have much white filament left so didn't really add it as an option in the listing

Cheers quest, put them in my case ready for use. Thanks for doing that, got a spare now.

 

[Jay Boy]

Here's mine. If any members of this forum want one they can have two for £4 posted anywhere in the worldView attachment 122767

Dude, was just about to message you on eBay with the link to this thread. Glad you were able to find it, however, it seems I got your design mixed up with a different one a few pages back!

 

[Ninoh-FOX]

This is the my jig!!!

 

[Reaga]

What's a jig, and will this have anything to do with getting Atmosphere on my Switch upon release? Mine is on 4.xx, which I know will not have an immediate softmod.

 

[huma_dawii]

Hey man, it was you I bought off on ebay right? You sent me a yellow and a white one

I want to buy one, how do I do that?

 

[Sonikku_a]

Nothing special but it works!

 

[hyndrid]

i have buy one on ebay yesterday

i buy a jig on ebay, guy send me my jig but someone stole him i receive empty letter already open wtf badluck

p.s: the seller is suppose to send me another replacement thank you to him

 

[kingsora831]

So i purchased a jig off ebay of the Maketo design.
Placed it in the Right joycon rail, Hold + Volume and Power.
Pushed the jig down as far it could go, then just enough so the metal of the jig was making contact.
Then i tried moving the jig to the right slightly, then to the left.

I've tried multiple multiple times and it simply wont boot into rcm and i dont know why.

Any advice?

 

[Delerious]

All I needed was some paper, tape, zipties for structural integrity, a safety pin and some pliers. Took a few revisions, but finally got it working 100% of the time. Best of all, it slides into the joy-con slot with ease, and makes contact without having to guide the safety pin part.

Spoiler

 

[PuNKeMoN]

This one is pretty fancy
https://goo.gl/images/jCk8bN

 

[Queen of SoS]

Question the jigs won’t break anything will it?

 

[FahQ]

Question the jigs won’t break anything will it?

Ideally no. If made by hand or even if careless with a 3d printed jig you could certainly break pins. Just be careful and don't be rough with it.

 

[Queen of SoS]

Ideally no. If made by hand or even if careless with a 3d printed jig you could certainly break pins. Just be careful and don't be rough with it.

Oh okay thank you this seems a bit harder than normal for a hack... well at least for me.

 

[MattiaV]

Cheers quest, put them in my case ready for use. Thanks for doing that, got a spare now.

Bought 1 from him too, it's a little hard to push it in but looks like it works!

 

[Rai]

had I known you were from here I'd have put two in for you!

Just ordered a green one from you

I'm from Morocco, I think that's unique enough around here so that you'll recognise my order

 

[MikeDX]

Just ordered a green one from you

I'm from Morocco, I think that's unique enough around here so that you'll recognise my order

Duly noted my friend

 

[Type_O_Dev]

Here’s mine! Share yours. 3D Jig is from the posts. I printed it and followed the directions and this is how mine turned out.

made this one with cut up 3ds game case and usb