Hardware SD Card locker gone

[Mat37]

As in the title, i have an SD card with the small thing to set the card read-only or not gone. So it's set to read-only and i can't find a way to overcome that. Do you guys have any idea ?
Thanks.

 

[tedmg091309131]

You might try a very thin piece of plastic along the side of the card. You can find some clear very thin plastic commonly used as packaging for various small electronics items.

 

[Mat37]

You might try a very thin piece of plastic along the side of the card. You can find some clear very thin plastic commonly used as packaging for various small electronics items.

Or maybe i can try to take the locker off an adaptater and put it in my card ?

 

[Zanoab]

Taking apart a SD card with the intention of putting it back together (especially to replace the read-only lock) is a bad idea. You would have to glue it back together and there is the possibility that it won't fit in card slots and/or the shells would be loose enough for the read-only lock to fall out again. I know from experience and 10 years later, that SD card hasn't left its case which was still enough for the read-only lock to fall out.

Your best bet is putting a piece of plastic where the lock would normally be and hope it turns off the read-only.

 

[Canna]

celotape