Tutorial  Updated

PS5 Exploit Guide

PS5 Hack Status:


FW Ranges:
2.XX = PS4/5 backups (KEX+HV+Linux) + keys exploit (WK: 2.50 best / 2.7X max)
3.XX = PS4/5 backups (KEX+HV+Linux) + keys exploit (WK/BD/LUA: 3.20 best / 3.21 max)
4.XX = PS4/5 backups (KEX+HV+Linux) + keys exploit (WK/BD/LUA (Y2/NF/YARPE 4.03+): 4.50 best / 4.51 max)
5.XX = PS4/5 backups (KEX+HV+Linux) + keys exploit (
WK/BD/Y2/NF/LUA/YARPE: 5.50 best + max)

6.XX = PS4/5 backups (KEX+HV+Linux) (BD/Y2/NF/LUA/YARPE: 6.50 max)
7.XX = PS4/5 backups (KEX+HV+Linux) (
WK/BD/Y2/NF/LUA/YARPE: 7.61 best + max)
8.XX-10.00 = PS4/5 backups (KEX+HV+Linux) (WK/BD/Y2/NF/LUA/YARPE)
10.01-12.70 = PS4/5 backups (KEX+HV+Linux) (
WK/BD/Y2/NF/LUA/YARPE)
13.XX-13.60 = PS4/5 backups (KEX+HV+Linux) (
WK/BD(13.42)/Y2/LUA/YARPE)
14.XX = No public KEX, HV/A53 patched in 14.20, UL ONLY (LUA/YARPE)

NOTE 1: Recommended firmware is subjective. Staying low is always recommended.
NOTE 2: Do not update too many major versions (e.g., 4.xx to 5.xx or 7.xx to 8.xx). Remain low unless all you want is backups.
NOTE 3: P2JB can take over an hour to exploit on FW up to 12.70.


Hypervisor (HV):
Highest released HV: 13.60
Highest unreleased HV: 14.00
*unreleased/unimplemented


Kernel (KEX):
Highest released KEX:
13.60 (ReLapse)
Highest unreleased KEX: 14.10 (Gezine)
UMTX2:
1.00-7.61 (*WK to 5.50 / BDJB to 7.61)
Lapse: 1.00-10.01
Relapse: 7.00-13.60
Poopsploit:
4.03-12.00 (*BD to 12.00)
P2JB: 9.00-12.70 (*WK: Lapse to 10.01 / P2JB to 12.70)

Userland (UL):
Webkit: 1.00-5.50 (PSFREE +UMTX2) / 7.00-13.60 (RELAPSE) (Recommended)
LUA (Artemis): 2.00-LATEST (LUA exploit, + Lapse up to 10.01)
Y2JB: 4.03-13.40 (YouTube exploit, + Lapse: 10.01 / P2JB: 12.70)
NFNH: 4.03-12.XX (Netflix exploit, + Lapse: 10.01)
YARPE: 4.03-12.XX (Ren'Py exploit, + Lapse: 10.01 / P2JB: 12.70)
BD-JB: 1.00-13.42 (BD exploit + UMTX2: 7.61 / BD-JB5 + Poops to 12.00) (14.XX SOON)
Mast1C0re: 1.00-7.61 (Depreciated for LuaC0re)
LuaC0re: 1.00-12.70 (Poops: 4.03-12.00/P2JB: 9.00-12.70)
REDIS: 1.00-5.50 (Jordy's untethered JB on boot)

NOTE 1: A userland entry point (UL) chained to kernel exploit (KEX) is required to exploit your console at bare minimum.
NOTE 2: Consoles 7.00-13.60 should now use WebKit and RELAPSE (Recommended)


Useful Applications:
FPKG: 3.00-11.60 (KStuff Lite) / 12.XX-13.60 (KStuff-NG SOON)
Kstuff Lite: 3.00-12.70
HERE
Kstuff Toggle: 3.00-12.00 HERE
PS5 App Dumper: 3.00-13.60 HERE
Dump Runner: 3.00-12.00 HERE
Dump Installer: 3.00-12.00 HERE
Backporting: Possible (backpork / Porkfolio)
PS4/PS5 DLC: Work with Kstuff Lite
Trophies: Work with Kstuff Lite
Compression: Works with Kstuff Lite
Homebrew Enabler: etaHEN (3.00-10.01) latest HERE
PS5 Backup manager: ItemzFlow Compatibility list: HERE
PS4 Backup Loading: Works (rest mode & backports work, can crash).
PS5 Debug NG: 3.XX-13.XX
HERE
PS5 Remote Play: Works HERE & HERE
PS5 Trainers/Cheats: Work

UART:
HERE
Linux: (OG: 3.00-13.60) HERE
Kldload (wip): 3.00-6.50 HERE
PSN access: NEVER
Latest OFW: 14.22 (2/11/26)
Summarised OFW/Model guide: HERE
1.XX-7.61 compatibility list:
HERE
PS5 SDK Repo: HERE
Legit PKG Updates: HERE or HERE
OFW Updates: HERE (history HERE)

Preparing Your Console:


It is recommended to either self-host offline or block these addresses in your router to avoid accidental updates or getting an update nag. Using the DNS method is no longer failsafe, as these are not guaranteed to be running 24/7.


dau01.ps5.update.playstation.net
dbr01.ps5.update.playstation.net
dcn01.ps5.update.playstation.net
deu01.ps5.update.playstation.net
dhk01.ps5.update.playstation.net
djp01.ps5.update.playstation.net
dkr01.ps5.update.playstation.net
dmx01.ps5.update.playstation.net
dru01.ps5.update.playstation.net
dsa01.ps5.update.playstation.net
dtw01.ps5.update.playstation.net
duk01.ps5.update.playstation.net
dus01.ps5.update.playstation.net
fau01.ps5.update.playstation.net
fbr01.ps5.update.playstation.net
fcn01.ps5.update.playstation.net
feu01.ps5.update.playstation.net
fhk01.ps5.update.playstation.net
fjp01.ps5.update.playstation.net
fkr01.ps5.update.playstation.net
fmx01.ps5.update.playstation.net
fru01.ps5.update.playstation.net
fsa01.ps5.update.playstation.net
ftw01.ps5.update.playstation.net
fuk01.ps5.update.playstation.net
fus01.ps5.update.playstation.net
hau01.ps5.update.playstation.net
hbr01.ps5.update.playstation.net
hcn01.ps5.update.playstation.net
heu01.ps5.update.playstation.net
hhk01.ps5.update.playstation.net
hjp01.ps5.update.playstation.net
hkr01.ps5.update.playstation.net
hmx01.ps5.update.playstation.net
hru01.ps5.update.playstation.net
hsa01.ps5.update.playstation.net
htw01.ps5.update.playstation.net
huk01.ps5.update.playstation.net
hus01.ps5.update.playstation.net
sgst.prod.dl.playstation.net
gs2.ww.prod.dl.playstation.net

Alternative DNS IP:
62.210.38.117 - User Guide = ES7in1
or
45.56.67.85
(Leave DNS 2 blank)

To determine your OFW version:
Go to settings > system > console information.

Version string info:
Year.Half (1st/2nd half of the year)-Major Version No.Minor Version No.Extended info-Further Info.Retail/Debug

21.02-04.03.00.00-00.00.00.0.1

It is recommended to keep your console as low as possible to have access to better jailbreak stability and features. Stay as low as possible within the "Golden" firmware brackets that apply to your current firmware, see the top of this page.

(No jailbreak is ever guaranteed. No developer is obliged to release anything publicly)

WARNING:

Only update OFW manually via USB by getting the firmware file from HERE and installing from <USB>:/PS5/UPDATE/PS5UPDATE.PUP
(Updating with RECOVERY PUP will perform a factory format and will wipe your internal HDD)

PS5 factory mode PUP installation path:
/usb/PROSPERO/UPDATE/PROSPEROUPDATE.PUP

NOTE: Make a system back up before attempting any modifications.
On console: go to [Settings] > [System] > [System Software] > [Back Up and Restore] > [Back Up Your PS5]

Select Your Jailbreak:


WEBKIT:BD-JB:LUA:Y2JB:NFNH:YARPE:LuaC0re:BD-UN-JB:


  1. Information:
    Firmware 1.00-5.50 or 7.00-13.60 is required for the webkit exploit.

    Enabling web browser:
    Open [Settings] > select [Users & Accounts] > select [YouTube] > click "Link" > click "use browser" > click "terms" (bottom right) > click google apps icon (top right) > select Google Search.

    Exploiting 1.00-5.50:
    Enter https://zecoxao.github.io/luasauce/ or https://github.com/kmeps4/PSFree into google > click “Jailbreak" or wait for it to complete.

    Exploiting 7.00-13.60:

    https://ntfargo.github.io/Relapse-Exploit/

    https://zecoxao.github.io/bagagwa/

    https://soniciso1.github.io/poopicker/

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  2. Important:
    You will need a BD dive paired to your Slim/Pro console or an OG Phat model . Consoles must be on 1.00-13.42 to run this exploit.


    Recommended ISO: Viktorious AIO Auto BD-JB ISO for 4.XX-7.61

    Exploiting: 1, Burn ISO to a blank BD-R or BD-RE > Insert into console > click on the [DISC PLAYER] icon.

    2, Highlight [PIPELINE RUNNER] > click option 2 [Normaljailbreak-etaHEN-UMTX1.pipe] to auto load etaHEN ready for ItemzFlow.

    ELF Loader uses PS5 IP: port 9021 / BIN loader uses 9020 / Jar loader uses port 9025

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  3. Important:
    LUA entry point works from 2.00 to the latest OFW, but there is no KEX above 12.70 yet.
    (A compatible PS4 game is required to launch the exploit on PS5. See below)

    Your PS5 console must be activated to use save copying for PS4 games.
    1. Insert your game disc and, as soon as possible, make a save file within it.
    2. Copy the save files to USB, go to [SETTINGS] > [STORAGE] > [CONSOLE STORAGE] > [SAVE DATA] > [PS4 GAMES] > select the game save and copy to a USB drive.
    3. On PC, using a Google Drive account, make a new folder with the GAME ID of your game, and upload the savedata & savedata.bin files to that folder.
    4. Share the folder, set it to editor mode, share with anyone, and click "copy the link".
    5. Join the HTOS Discord group: HERE type "/decrypt", select "FALSE" for including SCE_SYS, paste or type in the Google Drive link, and press enter. The bot should begin mounting your save. (If it doesn't, paste in the link again.)
    6. Click "ENCRYPTED" to remove the Sony PFS layer. Download the generated files and extract the folder to your desktop (you should have 4 files in there and be named dec_savedata_CUSA[GAME ID]).
    7. Using REMOTE LUA LOADER, open the savedata folder, copy the 20 files within into your encrypted save folder on your desktop.
    8. Upload the encrypted save folder (now with 24 files in) to your Google Drive. It should be named "dec_savedata_CUSA[GAME ID]" where GAME ID is your games 5 digit number, and set it to editor mode, share with anyone, and then click "copy the link".
    9. Go back to the HTOS discord server, and type "/encrypt", hit "FALSE" for uploading individually, and "FALSE" to include SCE_SYS. Finally, hit shared_gd_link and paste in your link to the original save (4 files) folder. (If it doesn't, paste in the link again.)
    10. When this is done, paste the link to the decrypted save (24 files) folder, and the bot will encrypt the files.
    11. Resign the files by typing "/resign" followed by your account name on the console, or PSN ID associated with that account if using the latest OFW.
    12. Download the resigned files, extract the files to your USB drive and overwrite them into the savedata folder on your USB or external drive.
    13. Copy the saves back to your console [SETTINGS] > [SAVE DATA AND GAME/APP SETTINGS] > [SAVE DATA PS4] > [COPY OR DELETE FROM USB] > [COPY TO CONSOLE STORAGE] > select your game save folder from the USB drive and copy/overwrite old save data.
    14. Load LUA game again, and you should see the LUA LOADER screen.
    15. You can use "SEND_LUA.PY" to send the UMTX files to the loader.
    (NOTE: Some games require manual loading of save game)

    On firmware up to 7.61, you can now load UMTX/2 followed by etaHEN by sending the files to your console IP on PORT 9026.
    On firmware 8.00-LATEST, you can connect with the REMOTE LUA LOADER APP to send debug notifications or FTP on port 1337.

    LUA Loader: HERE or HERE

    Auto LUA Loader Fork: HERE

    Compatible LUA games:
    Aerial Life (CUSA17122)
    Aibeya (CUSA17068)
    Aikagi 2 (CUSA19556)
    Aikagi Kimi to Issho ni Pack (CUSA16229)
    Aikano Yukizora no Triangle (CUSA19370)
    Boku to Nurse no Kenshuu Nisshi (CUSA12049)
    Boku to Joi no Shinsatsu Nisshi (CUSA18107)
    Fuyu Kiss (CUSA29745)
    Hamidashi Creative (CUSA27389)
    Hamidashi Creative Demo (CUSA27390 requires the latest OFW to download from PSN)
    Haruoto Alice (CUSA14324)
    IxSHE Tell (CUSA17112)
    IxSHE Tell Demo (CUSA17126)
    Jinki Resurrection (CUSA25179)
    Jinki Resurrection Demo (CUSA25180 requires the latest OFW to download from PSN)
    Maid-san no Iru Kurashi (CUSA18106)
    Nora Princess and Stray Cat Heart HD (CUSA13303: Rename save9999.dat into nora_01.dat)
    Nora Princess and Strat Cat Heart 2 (CUSA13586)
    Raspberry Cube (CUSA16074)
    Winter Guest (CUSA11977)

    WARNING: using demos is free but can become corrupt, and you cannot upgrade your internal HDD either. If you lose the demo you can no longer use the exploit. Disc recommended.

    Incompatible LUA games:

    Dokyusei Remake Csver (CUSA47117)
    Dōkyūsei: Bangin' Summer - Home Edition Demo (CUSA47132)
    Kiss Trilogy (CUSA19341)
    Love Clear Demo (CUSA18109)
    Mikagami Sumika no Seifuku Katsudou (CUSA11481)
    Sen no Hatou, Arazone no Hime (CUSA09647)
    Tonari ni Kanojo no Iru Shiawase: Two Farce (CUSA09825)
    Tonari ni Kanojo no Iru Shiawase Summer Surprise (CUSA18998)

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  4. Requirements:
    PS5 console must be on 4.03-12.70 and previously activated through PSN or fake activated to use the YouTube app, unless you're restoring a backup.
    (Note: restoring a backup will factory reset your console).

    Information:
    If updating and older installation, download the latest download0.dat > use FTP or PS5 Explorer to place it in the user/download/PPSA01650 folder.

    Preparation:
    Download the Y2JB_backup_X.X(4.03) if you're on 4.03-12.40, or the Y2JB_backup_X.X(12.20) if you're on 12.60 or higher from HERE
    On PC: format a USB 3.0 HDD to exFAT, and copy the PS5 folder from the backup to the root, and put the latest nanodnf.efl from nanoDNS to the root too.
    On console: go to [Settings] > [System] > [System Software] > [Back up and Restore] > [Restore] > select the y2JB back up & let it install (the console will reboot when complete).
    (Note: The exploit will now be accessible under the [MEDIA] tab)

    Exploiting:
    Going to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection > change [DNS Settings] to manual > change [Primary DNS] to 127.0.0.1 > click [Done] > open the [YouTube App].
    (Note: Ignore and internet connection issue warnings)

    Firmware up to 10.01 will use Lapse Kernel Exploit. Firmware 10.20-12.70 and above will use P2JB and could take up to an hour.

    You can send payloads using netcat GUI to PS5's IP Address & port 9021.

    You can swap the download0.dat to itzPLK version for auto loading and payload manager in future (payload manager accessible through browser on 127.0.0.1:8084)

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  5. Requirements:
    PS5 console must be on 4.30-10.01 and previously activated through PSN or fake activated. You will need a 256GB external HDD (minimum).

    Preparation:
    Download balenaEtcher
    Download the latest Extended Storage or M.2 Image (select your m.2's capacity)

    EXTERNAL DRIVE METHOD (Netflix_PS5_EU_Ext.7z):
    1a, On PC: connect your 256GB (min) USB drive to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
    (Note: 256GB is the smallest drive you can use)

    2a, On console: click [Settings] > [Storage] > [USB Extended Storage] > [Games and Apps] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
    (Note: The exploit will now be accessible under the [MEDIA] tab)

    INTERNAL DRIVE METHOD (Netflix.XXXXGB.7z):
    1b, On PC: connect the M.2 to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
    (Note: 4TB will take 80 mins, 2TB 45 mins, 256GB 10 mins)

    2b, On console: Power off the console > insert the M.2 SSD > power on the console > click [Settings] > [Storage] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
    (Note: The exploit will now be accessible under the [MEDIA] tab).

    Exploiting:
    1a, for consoles 10.01 and below, on console: go to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection. Go to Proxy > change [Automatic] to [Manual] > enter Address: 172.105.156.37 & port: 42069 > click [Done] > open the [Netflix App].
    (Note: Ignore and internet connection issue warnings)

    1b, for consoles 10.20-12.70, COMING SOON.

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  6. Important:
    YARPE works from 4.30 to 12.70 (9.00 - 12.07 via P2JB)
    (A compatible PS4 game is required to launch the exploit on PS5. See below)

    Requirements:
    PS5 console must be on 4.30-10.01 to use this exploit.

    Exploiting:
    coming soon

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].

  7. Requirements:
    PS5 console must be on 4.30-12.70 to use this exploit. SWRR

    Exploiting:
    coming soon

    Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].


  8. [UPDATED]
    No longer needed if using latest WebKit (to 13.60) or BD-JB (to 13.42)!


    Important:

    This method modifies the BD-J stack to allows BD-JB entry point to be re-enabled on consoles up to 13.60, for convenience only.

    Very Important:
    This method requires your console to be jailbroken by another method first to gain access to alter the files.

    https://github.com/Gezine/BD-UN-JB

    Preparation:
    Burn the ISO to a blank Blu Ray, insert it into the jailbroken console. Send the bdj_unpatch.elf to elfldr using netcat GUI to PS5's IP Address & port 9021 to unpatch BD-J.

    (NOTE: DO NOT REINSTALL/UPDATE FW, IT WILL WIPE THE PATCH AND LOSE BD-JB)


Once jailbroken it is recommended to run KSTUFF LITE and SHADOWMOUNTPLUS at minimum to get you up and running.
(ShadowMountPlus: is an automated background auto-mounter payload for jailbroken PS5 consoles. Detects, mounts, and installs game dumps from internal or external storage, with support for UFS, exFAT, PFS, and nested compressed PFS containers)

Additional Information:


Blocking Updated with nanoDNS:
Set primary DNS manually to 127.0.0.1. Send latest elf to BIN LOADER using netcat GUI to PS5's IP Address & port 9021.

PS4 GAME INFORMATION:
OFW 1.xx cannot run PS4 games.
OFW 2.xx runs PS4 games up to 8.03

OFW 3.xx runs PS4 games up to 8.52
OFW 4.xx runs PS4 games up to 9.04
OFW 5.xx runs PS4 games up to 9.60
OFW 6.xx runs PS4 games up to 10.50

OFW 7.xx runs PS4 games up to 11.00
OFW 8.xx/9.xx runs PS4 games up to 11.50
OFW 10.xx runs PS4 games up to 12.00

OFW 11.xx runs PS4 games up to 12.50
OFW 12.xx runs PS4 games up to 13.00
OFW 13.xx runs PS4 games up to 13.42
OFW 14.xx runs PS4 games up to 14.00


(Note: PS4 backported FPKGs also work perfectly on an exploited PS5 with Kstuff)


You can install free/demo PKGS (legit pkgs) via the debug pkg installer, provided you have all the files/json/licences required.
(Astro’s Playroom has no licences and can be installed and played from official pkgs and updated inline with your firmware)

Warnings:


1: Never enable IDU mode.
If you do, you will need to enter staff mode by holding L1 + L2 and tapping this combo: circle, cross, square, triangle, right D-Pad. Release L1 + L2, and you can access settings to exit IDU.

2: Try to stay on the lowest FW possible and wait for hacks on that firmware.

3: Installing legit game PKGs you do not own will never work, even if spoofed.

4: If you get stuck in a boot loop at the PS logo, the SNVS is corrupted (if the hash check fails on boot, this causes a “soft brick”). It’s not “bricked”. Simply reinstall your current firmware RECOVERY PUP in safe mode from USB: PS5 > UPDATE > PS5UPDATE.PUP.

Archived Information


 
Last edited by KiiWii,
https://github.com/gasb07/ps4mount/releases/tag/v0.3.1

PS4Mount 0.3.1

Play PS4 fake PKGs on a jailbroken PS5 straight from a USB drive, without installing them.

Put the game (and its update) .pkg files on a USB drive, plug it in and load ps4mount.elf. PS4Mount finds the packages, adds the games to the home screen and lets you play them from the drive. Nothing is copied to the console storage, and deleting a game on the console only removes it from the library: the .pkg stays on the drive.

Features:
  • Detects PS4 fake PKGs (game and update) in the root of any connected USB drive.
  • Adds the games to the home screen with their icon, name and update version.
  • Applies updates: put the update .pkg next to the game and it is picked up automatically.
  • Games run from the drive; no internal storage is used for the packages.
  • Deleting a game from the PS5 removes it from the library only. The .pkg is never deleted.
  • Notifications while scanning (how many games were found on each drive) and for added and removed games.
  • A web panel, also available as PS4Mount in the Media tab, to see the games and add or remove them from the library.
 
For anyone interested, I have finally managed to fix my infinite loading screen issue with split-screen on Halo Campaign Evolved! :D

So basically, you need to add a 4.xx backport and a modified eboot.bin to an existing dump (DUPLEX's one works great).

Please note that you need to apply the backport even if you are running a firmware greater than the minimum required to run the game (which is 12.00) because the modified eboot.bin expect the backported files to run (the eboot.bin alone throws a PRX module error at launch).

All credits goes to EGod Lelgo for the backport and Maikel for the modified eboot.bin, huge thanks to both of them. ^_^

-snip-

(might be obvious but don't forget to rename the eboot file to "eboot.bin")
Ah shoot, I just noticed that my comment was edited by a mod to remove the links (probably for legal reasons).

Well, if anyone need help about this, my DMs are open. :)
 
  • Like
Reactions: AlphaBravo
https://github.com/gasb07/ps4mount/releases/tag/v0.3.1

PS4Mount 0.3.1

Play PS4 fake PKGs on a jailbroken PS5 straight from a USB drive, without installing them.

Put the game (and its update) .pkg files on a USB drive, plug it in and load ps4mount.elf. PS4Mount finds the packages, adds the games to the home screen and lets you play them from the drive. Nothing is copied to the console storage, and deleting a game on the console only removes it from the library: the .pkg stays on the drive.

Features:
  • Detects PS4 fake PKGs (game and update) in the root of any connected USB drive.
  • Adds the games to the home screen with their icon, name and update version.
  • Applies updates: put the update .pkg next to the game and it is picked up automatically.
  • Games run from the drive; no internal storage is used for the packages.
  • Deleting a game from the PS5 removes it from the library only. The .pkg is never deleted.
  • Notifications while scanning (how many games were found on each drive) and for added and removed games.
  • A web panel, also available as PS4Mount in the Media tab, to see the games and add or remove them from the library.
Interesting tool. From what I can see, base games and updates work, but DLC do not work (yet?)? Not really sure what's the use case for this, though. Using the same HDD on multiple PS5s? Similar to what ShadowMountPlus does with PS5 games? From what I can remember, you can combine updates with DLCs and make another custom update PKG file? would that one work?
 
Interesting tool. From what I can see, base games and updates work, but DLC do not work (yet?)? Not really sure what's the use case for this, though. Using the same HDD on multiple PS5s? Similar to what ShadowMountPlus does with PS5 games? From what I can remember, you can combine updates with DLCs and make another custom update PKG file? would that one work?

Haven't tried yet. Expect more updates for the app at some point. Yeah some PS4 games are merged with dlc or you can do it yourself. I think your connection to SM+ is a good comparison. Sometimes I test PS4 games on ps5 and then delete from internal. Don't have many spare external HDD. Means I could save time and space.

Also interesting that can apparently mount game and update separately....If so can change updates on fly as you like.....if I understand that correctly 😂
 
Last edited by AlphaBravo,
ELI5:
  • Why does consoles still uses webkit for rendering html even after so many entry point being discovered? Or use a sandbox (if possible) version of it?
  • Is it possible for a developer to introduce (maliciously) a vulnerability seeking to affect a given device (like a gaming console)? (How does one knows which webkit is installed? via license document/text?)
  • How does this specific jailbreak works?
    • It starts exploring the vulnerability on wk, which allows to corrupt PS5's RAM with careful crafted payloads?
      • Shouldn't the ps5 browser/wk be working as a non-privilleged mode application? how does it allows to escalate?
    • The payloads then replace current KX (syscalls) to give user complete access?
      • How that bypasses the need for encryption systems? (is there a specific syscall to check encryption?)
    • The payload then allow HV overtake?
  • Tell me where I can find more about this process
Thank you
 
Hello
I'm having trouble installing PS5 fpkg files.

I have the latest shadowmountplus, kstuff, and a53 ppr payloads, on fw 4.5 .
I tried installing through debug settings and through other package management homebrew apps, same result: An error occured CE-109573-5

Did anyone come across such difficulties?
Note: I did not make the fpkg files myself- got them from the usual place(s).
I tried spiderman2, hades 2, assassins creed blackflag, and cocoon.

1000032746.jpg
 
Last edited by lululemon,
So, should I stay on 6.50 or update to 13.60?

Broad question. Depends on many factors.
What do you want / need from your system. Aks yourself this question and if you can define your criteria you know if you need to update or not.

Is it possible to move (transfer/redesing) saves from Profile 1 to Profile 2?

Via Garlic Manager you can. I switch saves from profiles when the need arises.
 
Via Garlic Manager you can. I switch saves from profiles when the need arises.
Awesome, I'll use this for my game exploit.

Broad question. Depends on many factors.
What do you want / need from your system. Aks yourself this question and if you can define your criteria you know if you need to update or not.
Ideally, I want CFW—something similar to PS3
 
I did notice the audio in the trailer / demo video was slightly distorted - but wasn't sure if it was a recording issue or not.
@TheStonedModder is that just a limitation we have to live with? (no pressure, you have enough to work on lol)
At the time I thought it was my cheap capture card

But it’s almost certainly a bug on the ps5 side. Because a friend of mine ported this to PS4 and does not have that issue at all
 
Hi, how do I stop YouTube (for y2jb) from updating? I read that the method from Gezine at y2jb github—where you modify the version number—doesn't actually work. The same goes for other apps, like Netflix or other games: how can I prevent them from downloading updates when connected to internet?
Try this ->
Edit: Tried to make it a link only but it still extracted media. Hmm..
 
https://github.com/gasb07/ps4mount/releases/tag/v0.3.1

PS4Mount 0.3.1

Play PS4 fake PKGs on a jailbroken PS5 straight from a USB drive, without installing them.

Put the game (and its update) .pkg files on a USB drive, plug it in and load ps4mount.elf. PS4Mount finds the packages, adds the games to the home screen and lets you play them from the drive. Nothing is copied to the console storage, and deleting a game on the console only removes it from the library: the .pkg stays on the drive.

Features:
  • Detects PS4 fake PKGs (game and update) in the root of any connected USB drive.
  • Adds the games to the home screen with their icon, name and update version.
  • Applies updates: put the update .pkg next to the game and it is picked up automatically.
  • Games run from the drive; no internal storage is used for the packages.
  • Deleting a game from the PS5 removes it from the library only. The .pkg is never deleted.
  • Notifications while scanning (how many games were found on each drive) and for added and removed games.
  • A web panel, also available as PS4Mount in the Media tab, to see the games and add or remove them from the library.

/me digs up his 10TB external ps4 backup drive to see what happens
 
https://github.com/gasb07/ps4mount/releases/tag/v0.3.1

PS4Mount 0.3.1

Play PS4 fake PKGs on a jailbroken PS5 straight from a USB drive, without installing them.

Put the game (and its update) .pkg files on a USB drive, plug it in and load ps4mount.elf. PS4Mount finds the packages, adds the games to the home screen and lets you play them from the drive. Nothing is copied to the console storage, and deleting a game on the console only removes it from the library: the .pkg stays on the drive.

Features:
  • Detects PS4 fake PKGs (game and update) in the root of any connected USB drive.
  • Adds the games to the home screen with their icon, name and update version.
  • Applies updates: put the update .pkg next to the game and it is picked up automatically.
  • Games run from the drive; no internal storage is used for the packages.
  • Deleting a game from the PS5 removes it from the library only. The .pkg is never deleted.
  • Notifications while scanning (how many games were found on each drive) and for added and removed games.
  • A web panel, also available as PS4Mount in the Media tab, to see the games and add or remove them from the library.
Hmm interesting. I wanna know if it works with DLC if so it will save me alot of time xD If not then its just not worth using imho
 


If buying isn't owning, then piracy isn't stealing, right Sony?


Problem with these stores afaik is there doesn't seem much info what release your dl and then installing. Might end up with an earlier release that is bugged or bad backport. Once you get a clear nfo, and a category for updates and backports, maybe it will be worth it.

Id rather manually search releases and install myself so I KNOW exactly what I'm getting.
 

Site & Scene News

New Hot Discussed User Submitted