PS5 Hack Status:

FW Ranges:
2.XX = KEX+HV: PS4/5 backups, possible keys exploit (WK: 2.50 best / 2.7X max)
3.XX = KEX+HV+Linux: PS4/5 backups, possible keys exploit (WK/BD/LUA: 3.20 best / 3.21 max)
4.XX = KEX+HV+Linux: PS4/5 backups (WK/BD/LUA (Y2/NF/YARPE 4.03+): 4.50 best / 4.51 max)
5.XX = KEX+HV+Linux: PS4/5 backups (WK/BD/Y2/NF/LUA/YARPE: 5.50 best + max)
6.XX = KEX: PS4/5 backups (KEX+HV+Linux: 6.02 max) (WK/BD/Y2/NF/LUA/YARPE: 6.02 for Linux / 6.50 max)
7.XX = KEX: PS4/5 backups (KEX+HV+Linux: 7.61) (WK/BD/Y2/NF/LUA/YARPE: 7.61 best + max)
8.XX-10.00 = KEX: PS4/5 backups, no HV (WK/BD/Y2/NF/LUA/YARPE)
10.01-12.70 = KEX: PS4/5 backups, no HV (WK/BD/Y2/NF/LUA/YARPE)
13.XX = HV+KEX+WK (WK/BD (13.42)/Y2/LUA/YARPE)
14.XX = No KEX/UL only (LUA/YARPE)

NOTE 1: Recommended firmware is subjective. Staying low is always recommended.
NOTE 2: Do not update too many major versions (e.g., 4.xx to 5.xx or 7.xx to 8.xx). Remain low unless all you want is backups.
NOTE 3: P2JB can take over an hour to exploit on FW up to 12.70.

Hypervisor (HV):
Highest released HV: 7.61
Highest unreleased HV: 13.60 (SlopVisor)
*unreleased/unimplemented

Kernel (KEX):
Highest released KEX: 13.60 (ReLapse)
Highest unreleased KEX: 13.60 (SlopSploit)
UMTX2: 1.00-7.61 (*WK to 5.50 / BDJB to 7.61)
Lapse: 1.00-10.01
Relapse/Prolapse: 7.00-13.60
Poopsploit: 4.03-12.00 (*BD to 12.00)
P2JB: 9.00-12.70 (*WK: Lapse to 10.01 / P2JB to 12.70)

Userland (UL):
LUA (Artemis): 2.00-LATEST (LUA exploit, + Lapse up to 10.01)
Y2JB: 4.03-13.40 (YouTube exploit, + Lapse: 10.01 / P2JB: 12.70)
NFNH: 4.03-12.XX (Netflix exploit, + Lapse: 10.01)
YARPE: 4.03-12.XX (Ren'Py exploit, + Lapse: 10.01 / P2JB: 12.70)
BD-JB: 1.00-13.42 (BD exploit + UMTX2: 7.61 / BD-JB5 + Poops to 12.00)
Webkit: 1.00-5.50 (PSFREE +UMTX2: 5.50 / 7.00-13.60 (RELAPSE)
Mast1C0re: 1.00-7.61 (Depreciated for LuaC0re)
LuaC0re: 1.00-12.70 (Poops: 4.03-12.00/P2JB: 9.00-12.70)
REDIS: 1.00-5.50 (Jordy's untethered JB on boot)

NOTE 1: A userland entry point (UL) chained to kernel exploit (KEX) is required to exploit your console.
NOTE 2: Consoles 7.00-13.60 can use WebKit and RELAPSE (Recommended)

Useful Applications:
FPKG: 3.00-11.60 with KStuff Lite / 12.XX-13.60 SOON
Kstuff Lite: 3.00-12.70 HERE
Kstuff Toggle: 3.00-12.00 HERE
PS5 App Dumper: 3.00-12.00 HERE
Dump Runner: 3.00-12.00 HERE
Dump Installer: 3.00-12.00 HERE
Backporting: Possible (backpork / Porkfolio)
PS4/PS5 DLC: Work with Kstuff Lite
Trophies: Work with Kstuff Lite
Compression: Works with Kstuff Lite
Homebrew Enabler: etaHEN (3.00-10.01) latest HERE
PS5 Backup manager: ItemzFlow Compatibility list: HERE
PS4 Backup Loading: Works (rest mode & backports work, can crash).
PS5 Debug NG: 3.XX-13.XX HERE
PS5 Remote Play: Works HERE & HERE
PS5 Trainers/Cheats: Work

UART: HERE
Linux: (OG: 3.00-7.61, Slim: 7.61) HERE
Kldload (wip): 3.00-6.50 HERE
PSN access: NEVER
Latest OFW: 14.00 (16/9/26)
Summarised OFW/Model guide: HERE
1.XX-7.61 compatibility list: HERE
PS5 SDK Repo: HERE
Legit PKG Updates: HERE or HERE
OFW Updates: HERE (history HERE)

Preparing Your Console:

It is recommended to either self-host offline or block these addresses in your router to avoid accidental updates or getting an update nag. Using the DNS method is no longer failsafe, as these are not guaranteed to be running 24/7.

Spoiler: Addresses to block to avoid updates:

dau01.ps5.update.playstation.net
dbr01.ps5.update.playstation.net
dcn01.ps5.update.playstation.net
deu01.ps5.update.playstation.net
dhk01.ps5.update.playstation.net
djp01.ps5.update.playstation.net
dkr01.ps5.update.playstation.net
dmx01.ps5.update.playstation.net
dru01.ps5.update.playstation.net
dsa01.ps5.update.playstation.net
dtw01.ps5.update.playstation.net
duk01.ps5.update.playstation.net
dus01.ps5.update.playstation.net
fau01.ps5.update.playstation.net
fbr01.ps5.update.playstation.net
fcn01.ps5.update.playstation.net
feu01.ps5.update.playstation.net
fhk01.ps5.update.playstation.net
fjp01.ps5.update.playstation.net
fkr01.ps5.update.playstation.net
fmx01.ps5.update.playstation.net
fru01.ps5.update.playstation.net
fsa01.ps5.update.playstation.net
ftw01.ps5.update.playstation.net
fuk01.ps5.update.playstation.net
fus01.ps5.update.playstation.net
hau01.ps5.update.playstation.net
hbr01.ps5.update.playstation.net
hcn01.ps5.update.playstation.net
heu01.ps5.update.playstation.net
hhk01.ps5.update.playstation.net
hjp01.ps5.update.playstation.net
hkr01.ps5.update.playstation.net
hmx01.ps5.update.playstation.net
hru01.ps5.update.playstation.net
hsa01.ps5.update.playstation.net
htw01.ps5.update.playstation.net
huk01.ps5.update.playstation.net
hus01.ps5.update.playstation.net
sgst.prod.dl.playstation.net
gs2.ww.prod.dl.playstation.net

Alternative DNS IP:
62.210.38.117 - User Guide = ES7in1
or
45.56.67.85
(Leave DNS 2 blank)

Spoiler: System Update Information

To determine your OFW version:
Go to settings > system > console information.

Version string info:
Year.Half (1st/2nd half of the year)-Major Version No.Minor Version No.Extended info-Further Info.Retail/Debug

21.02-04.03.00.00-00.00.00.0.1

It is recommended to keep your console as low as possible to have access to better jailbreak stability and features. Stay as low as possible within the "Golden" firmware brackets that apply to your current firmware, see the top of this page.

(No jailbreak is ever guaranteed. No developer is obliged to release anything publicly)

WARNING:
Only update OFW manually via USB by getting the firmware file from HERE and installing from <USB>:/PS5/UPDATE/PS5UPDATE.PUP
(Updating with RECOVERY PUP will perform a factory format and will wipe your internal HDD)

PS5 factory mode PUP installation path:
/usb/PROSPERO/UPDATE/PROSPEROUPDATE.PUP

NOTE: Make a system back up before attempting any modifications.
On console: go to [Settings] > [System] > [System Software] > [Back Up and Restore] > [Back Up Your PS5]

Select Your Jailbreak:

WEBKIT:BD-JB:LUA:Y2JB:NFNH:YARPE:LuaC0re:BD-UN-JB:

1. 
   Information:
   Firmware 1.00-5.50 or 7.00-13.60 is required for the webkit exploit.
   
   Enabling web browser:
   Open [Settings] > select [Users & Accounts] > select [YouTube] > click "Link" > click "use browser" > click "terms" (bottom right) > click google apps icon (top right) > select Google Search.
   
   Exploiting 1.00-5.50:
   Enter https://zecoxao.github.io/luasauce/ or https://github.com/kmeps4/PSFree into google > click “Jailbreak" or wait for it to complete.
   
   Exploiting 7.00-13.60:
   
   https://ntfargo.github.io/Relapse-Exploit/
   
   https://zecoxao.github.io/bagagwa/
   
   https://soniciso1.github.io/poopicker/
   
   Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].
   
2. 
   Important:
   You will need a BD dive paired to your Slim/Pro console or an OG Phat model . Consoles must be on 1.00-13.42 to run this exploit.
   
   Recommended ISO: Viktorious AIO Auto BD-JB ISO for 4.XX-7.61
   
   Exploiting: 1, Burn ISO to a blank BD-R or BD-RE > Insert into console > click on the [DISC PLAYER] icon.
   
   2, Highlight [PIPELINE RUNNER] > click option 2 [Normaljailbreak-etaHEN-UMTX1.pipe] to auto load etaHEN ready for ItemzFlow.
   
   ELF Loader uses PS5 IP: port 9021 / BIN loader uses 9020 / Jar loader uses port 9025
   
   Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].
   
3. 
   Important:
   LUA entry point works from 2.00 to the latest OFW, but there is no KEX above 12.70 yet.
   (A compatible PS4 game is required to launch the exploit on PS5. See below)
   
   Your PS5 console must be activated to use save copying for PS4 games.
   
   1. Insert your game disc and, as soon as possible, make a save file within it.
   2. Copy the save files to USB, go to [SETTINGS] > [STORAGE] > [CONSOLE STORAGE] > [SAVE DATA] > [PS4 GAMES] > select the game save and copy to a USB drive.
   3. On PC, using a Google Drive account, make a new folder with the GAME ID of your game, and upload the savedata & savedata.bin files to that folder.
   4. Share the folder, set it to editor mode, share with anyone, and click "copy the link".
   5. Join the HTOS Discord group: HERE type "/decrypt", select "FALSE" for including SCE_SYS, paste or type in the Google Drive link, and press enter. The bot should begin mounting your save. (If it doesn't, paste in the link again.)
   6. Click "ENCRYPTED" to remove the Sony PFS layer. Download the generated files and extract the folder to your desktop (you should have 4 files in there and be named dec_savedata_CUSA[GAME ID]).
   7. Using REMOTE LUA LOADER, open the savedata folder, copy the 20 files within into your encrypted save folder on your desktop.
   8. Upload the encrypted save folder (now with 24 files in) to your Google Drive. It should be named "dec_savedata_CUSA[GAME ID]" where GAME ID is your games 5 digit number, and set it to editor mode, share with anyone, and then click "copy the link".
   9. Go back to the HTOS discord server, and type "/encrypt", hit "FALSE" for uploading individually, and "FALSE" to include SCE_SYS. Finally, hit shared_gd_link and paste in your link to the original save (4 files) folder. (If it doesn't, paste in the link again.)
   10. When this is done, paste the link to the decrypted save (24 files) folder, and the bot will encrypt the files.
   11. Resign the files by typing "/resign" followed by your account name on the console, or PSN ID associated with that account if using the latest OFW.
   12. Download the resigned files, extract the files to your USB drive and overwrite them into the savedata folder on your USB or external drive.
   13. Copy the saves back to your console [SETTINGS] > [SAVE DATA AND GAME/APP SETTINGS] > [SAVE DATA PS4] > [COPY OR DELETE FROM USB] > [COPY TO CONSOLE STORAGE] > select your game save folder from the USB drive and copy/overwrite old save data.
   14. Load LUA game again, and you should see the LUA LOADER screen.
   15. You can use "SEND_LUA.PY" to send the UMTX files to the loader.
   (NOTE: Some games require manual loading of save game)
   
   On firmware up to 7.61, you can now load UMTX/2 followed by etaHEN by sending the files to your console IP on PORT 9026.
   On firmware 8.00-LATEST, you can connect with the REMOTE LUA LOADER APP to send debug notifications or FTP on port 1337.
   
   LUA Loader: HERE or HERE
   
   Auto LUA Loader Fork: HERE
   
   Compatible LUA games:
   Aerial Life (CUSA17122)
   Aibeya (CUSA17068)
   Aikagi 2 (CUSA19556)
   Aikagi Kimi to Issho ni Pack (CUSA16229)
   Aikano Yukizora no Triangle (CUSA19370)
   Boku to Nurse no Kenshuu Nisshi (CUSA12049)
   Boku to Joi no Shinsatsu Nisshi (CUSA18107)
   Fuyu Kiss (CUSA29745)
   Hamidashi Creative (CUSA27389)
   Hamidashi Creative Demo (CUSA27390 requires the latest OFW to download from PSN)
   Haruoto Alice (CUSA14324)
   IxSHE Tell (CUSA17112)
   IxSHE Tell Demo (CUSA17126)
   Jinki Resurrection (CUSA25179)
   Jinki Resurrection Demo (CUSA25180 requires the latest OFW to download from PSN)
   Maid-san no Iru Kurashi (CUSA18106)
   Nora Princess and Stray Cat Heart HD (CUSA13303: Rename save9999.dat into nora_01.dat)
   Nora Princess and Strat Cat Heart 2 (CUSA13586)
   Raspberry Cube (CUSA16074)
   Winter Guest (CUSA11977)
   
   WARNING: using demos is free but can become corrupt, and you cannot upgrade your internal HDD either. If you lose the demo you can no longer use the exploit. Disc recommended.
   
   Incompatible LUA games:
   Dokyusei Remake Csver (CUSA47117)
   Dōkyūsei: Bangin' Summer - Home Edition Demo (CUSA47132)
   Kiss Trilogy (CUSA19341)
   Love Clear Demo (CUSA18109)
   Mikagami Sumika no Seifuku Katsudou (CUSA11481)
   Sen no Hatou, Arazone no Hime (CUSA09647)
   Tonari ni Kanojo no Iru Shiawase: Two Farce (CUSA09825)
   Tonari ni Kanojo no Iru Shiawase Summer Surprise (CUSA18998)
   
   Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].
   
4. 
   Requirements:
   PS5 console must be on 4.30-12.70 and previously activated through PSN or fake activated to use the YouTube app, unless you're restoring a backup.
   (Note: restoring a backup will factory reset your console).
   
   Information:
   If updating and older installation, download the latest download0.dat > use FTP or PS5 Explorer to place it in the user/download/PPSA01650 folder.
   
   Preparation:
   Download the Y2JB_backup_X.X(4.03) if you're on 4.03-12.40, or the Y2JB_backup_X.X(12.20) if you're on 12.60 or higher from HERE
   On PC: format a USB 3.0 HDD to exFAT, and copy the PS5 folder from the backup to the root, and put the latest nanodnf.efl from nanoDNS to the root too.
   On console: go to [Settings] > [System] > [System Software] > [Back up and Restore] > [Restore] > select the y2JB back up & let it install (the console will reboot when complete).
   (Note: The exploit will now be accessible under the [MEDIA] tab)
   
   Exploiting:
   Going to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection > change [DNS Settings] to manual > change [Primary DNS] to 127.0.0.1 > click [Done] > open the [YouTube App].
   (Note: Ignore and internet connection issue warnings)
   
   Firmware up to 10.01 will use Lapse Kernel Exploit. Firmware 10.20-12.70 and above will use P2JB and could take up to an hour.
   
   You can send payloads using netcat GUI to PS5's IP Address & port 9021.
   
   You can swap the download0.dat to itzPLK version for auto loading and payload manager in future (payload manager accessible through browser on 127.0.0.1:8084)
   
   Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].
   
5. 
   Requirements:
   PS5 console must be on 4.30-10.01 and previously activated through PSN or fake activated. You will need a 256GB external HDD (minimum).
   
   Preparation:
   Download balenaEtcher
   Download the latest Extended Storage or M.2 Image (select your m.2's capacity)
   
   EXTERNAL DRIVE METHOD (Netflix_PS5_EU_Ext.7z):
   1a, On PC: connect your 256GB (min) USB drive to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
   (Note: 256GB is the smallest drive you can use)
   
   2a, On console: click [Settings] > [Storage] > [USB Extended Storage] > [Games and Apps] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
   (Note: The exploit will now be accessible under the [MEDIA] tab)
   
   INTERNAL DRIVE METHOD (Netflix.XXXXGB.7z):
   1b, On PC: connect the M.2 to your Windows/Mac/Linux PC > extract the image to your computer > open Etcher > click [Flash From File] & select the extracted image *.zip > click [Select Target] & choose the external drive > Click [Flash!] & allow it to complete.
   (Note: 4TB will take 80 mins, 2TB 45 mins, 256GB 10 mins)
   
   2b, On console: Power off the console > insert the M.2 SSD > power on the console > click [Settings] > [Storage] > press X on [Netflix] > select [NETFLIX] under items to move > select [Move] > move to internal storage & allow it to complete.
   (Note: The exploit will now be accessible under the [MEDIA] tab).
   
   Exploiting:
   1a, for consoles 10.01 and below, on console: go to [Settings] > [Network] > [Settings] > [Set up Internet Connection] > [Set up Manually] > set up a wireless or LAN connection. Go to Proxy > change [Automatic] to [Manual] > enter Address: 172.105.156.37 & port: 42069 > click [Done] > open the [Netflix App].
   (Note: Ignore and internet connection issue warnings)
   
   1b, for consoles 10.20-12.70, COMING SOON.
   
   Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].
   
6. 
   Important:
   YARPE works from 4.30 to 12.70 (9.00 - 12.07 via P2JB)
   (A compatible PS4 game is required to launch the exploit on PS5. See below)
   
   Requirements:
   PS5 console must be on 4.30-10.01 to use this exploit.
   
   Exploiting:
   coming soon
   
   Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].
   
7. 
   Requirements:
   PS5 console must be on 4.30-12.70 to use this exploit. SWRR
   
   Exploiting:
   coming soon
   
   Debug settings will be loaded, and the package installer can be found under [SETTINGS] > [DEBUG SETTINGS].
   
8. 
   
   [UPDATED]
   No longer needed if using latest WebKit (to 13.60) or BD-JB (to 13.42)!
   
   Important:
   This method modifies the BD-J stack to allows BD-JB entry point to be re-enabled on consoles up to 13.60, for convenience only.
   
   Very Important:
   This method requires your console to be jailbroken by another method first to gain access to alter the files.
   
   https://github.com/Gezine/BD-UN-JB
   
   Preparation:
   Burn the ISO to a blank Blu Ray, insert it into the jailbroken console. Send the bdj_unpatch.elf to elfldr using netcat GUI to PS5's IP Address & port 9021 to unpatch BD-J.
   
   (NOTE: DO NOT REINSTALL/UPDATE FW, IT WILL WIPE THE PATCH AND LOSE BD-JB)
   

Once jailbroken it is recommended to run KSTUFF LITE and SHADOWMOUNTPLUS at minimum to get you up and running.
(ShadowMountPlus: is an automated background auto-mounter payload for jailbroken PS5 consoles. Detects, mounts, and installs game dumps from internal or external storage, with support for UFS, exFAT, PFS, and nested compressed PFS containers)

Additional Information:

Blocking Updated with nanoDNS:
Set primary DNS manually to 127.0.0.1. Send latest elf to BIN LOADER using netcat GUI to PS5's IP Address & port 9021.

PS4 GAME INFORMATION:
OFW 1.xx cannot run PS4 games.
OFW 2.xx runs PS4 games up to 8.03
OFW 3.xx runs PS4 games up to 8.52
OFW 4.xx runs PS4 games up to 9.04
OFW 5.xx runs PS4 games up to 9.60
OFW 6.xx runs PS4 games up to 10.50
OFW 7.xx runs PS4 games up to 11.00
OFW 8.xx/9.xx runs PS4 games up to 11.50
OFW 10.xx runs PS4 games up to 12.00
OFW 11.xx runs PS4 games up to 12.50
OFW 12.xx runs PS4 games up to 13.00
OFW 13.xx runs PS4 games up to 13.52
OFW 14.xx runs PS4 games up to 14.00

(Note: PS4 backported FPKGs also work perfectly on an exploited PS5 with Kstuff)

You can install free/demo PKGS (legit pkgs) via the debug pkg installer, provided you have all the files/json/licences required.
(Astro’s Playroom has no licences and can be installed and played from official pkgs and updated inline with your firmware)

Warnings:

1: Never enable IDU mode.
If you do, you will need to enter staff mode by holding L1 + L2 and tapping this combo: circle, cross, square, triangle, right D-Pad. Release L1 + L2, and you can access settings to exit IDU.

2: Try to stay on the lowest FW possible and wait for hacks on that firmware.

3: Installing legit game PKGs you do not own will never work, even if spoofed.

4: If you get stuck in a boot loop at the PS logo, the SNVS is corrupted (if the hash check fails on boot, this causes a “soft brick”). It’s not “bricked”. Simply reinstall your current firmware RECOVERY PUP in safe mode from USB: PS5 > UPDATE > PS5UPDATE.PUP.

Archived Information

Spoiler

https://github.com/astrelsky/libhijacker

https://github.com/illusion0001/libhijacker

https://github.com/TheOfficialFloW/Presentations/blob/master/2022-hardwear-io-bd-jb.pdf

https://github.com/sleirsgoevy/bd-jb

https://github.com/psxdev/bd-jb

https://gbatemp.net/download/remount-system-with-write-permissions.37807/

https://github.com/john-tornblom/ps5-payload-sdk

https://github.com/john-tornblom/bdj-sdk/actions/workflows/bdjb.yml

 

[MadonnaProject]

This got me "wait, nvm, we have to wait for arksama. drats lol"

Post automatically merged: Yesterday at 10:19 PM

Well that's good to hear. Have fun!

Have you managed to get cheat runner to run? On previous firmwares enabling the cheatrunner elf made the console install an icon where cheatrunner could be booted from. This is not happening on 13.60

 

[HS2005]

So I can try Netcat GUI... Will do that, but should the version be 1.3 or can I use 1.1? Reason for that is 1.3 doesn't have a download link on the github page and so far I only found 1.1.

Here use mine. NetCat GUI v1.3.zip: https://gofile.io/d/UtE6QYMW
Modded also uses this tool and adds it as a link in his videos. Anyway: enjoy

Post automatically merged: Yesterday at 10:58 PM

Have you managed to get cheat runner to run? On previous firmwares enabling the cheatrunner elf made the console install an icon where cheatrunner could be booted from. This is not happening on 13.60

I actually use etaHEN for this ATM. I have tried like 20+ games now on 13.60 with enabling cheats and got no cheat related errors. So i'm not moving from it.

I check this website for game related cheats: https://hencheats.vercel.app/ and download the correct version.
Don't need 5000+ cheats.

 

[MadonnaProject]

Here use mine. NetCat GUI v1.3.zip: https://gofile.io/d/UtE6QYMW
Modded also uses this tool and adds it as a link in his videos. Anyway: enjoy

Post automatically merged: Yesterday at 10:58 PM

I actually use etaHEN for this ATM. I have tried like 20+ games now on 13.60 with enabling cheats and got no cheat related errors. So i'm not moving from it.

I check this website for game related cheats: https://hencheats.vercel.app/ and download the correct version.
Don't need 5000+ cheats.

You are a treasure of information aren't you haha. I hav cheats downloaded in ETAhen the only issue is when I try to bring up the cheats menu for every game it says game version cannot load? Maybe I need to delete the game and reload it again using shadow loader?

 

[HS2005]

You are a treasure of information aren't you haha.

That depends.... If you like my answers.

I hav cheats downloaded in ETAhen the only issue is when I try to bring up the cheats menu for every game it says game version cannot load? Maybe I need to delete the game and reload it again using shadow loader?

On the FTP. Go to this folder: /data/etaHEN/cheats/
Place the cheats .json, .mc4, .shn there. The cheat must match the game ID (so CUSA/PPSA) and version number e.g 1.004, v1.000 etc. If you place it there can you instantly check the cheats via the game.

FYI; etaHEN can only load one cheat. If you have 2 cheats for example a .json and .mc4 it will load one of them. I removed a couple of dupes that had like 3 cheats and replaced it with one version that has more or better cheats.

Example below:

 

[Inaki]

This morning was all successful. But now I want to try again and again this evening, but the message for R2 wouldn't show up now. Is there something changed or is the payload removed / bugged? Seems I can't get it to work anymore even after so many reboots.

Without being able to press R2 on the exploit I can install pkg, but not open homebrew aswell as the debug settings are totally different now.

I am in a hurry but I wanted to shed some light: there were some issues with payloads and they removed them from the repo, so now only the bare minimum jailbreak is done, there is no R2 message because there is no integrated payloads. But you don't need that; you have 9021 port listenning and you must send the kstuff payload yourself ( use the 1.11 one, from EchoStretch, that is a bit more.. "complete" and after the kstuff loads you can send the webkit installation one ( use itsPLK's Webkit Autoloader 0.5.0 one ). You just need kstuff and webkit installer for installing offline autoloader. Then reboot. Then you will add shadowmount and other things little by little. Have to go now but I may check in a couple of hours or tomorrow morning...
EDIT: or try this host: https://zecoxao.github.io/bagagwa/ I saw it somewhere and this may have a working thing... but the thing after having a JB environment with kstuff running, you send the webkit autoloader installer, ok ? good luck.

 

[HS2005]

PS5 App Dumper 2.00 Beta​

Highlights​

Dump queue

• Queue several installed titles and dump them one after the other, each with its own settings
• Disc games are recognised, and the queue waits for you to swap the disc
• A dump is refused up front when it does not fit on the destination

Dumps library (Menu > Dumps)

• Lists the dumps on every USB drive and on the console storage
• Move, delete, unlink from ShadowMount, and turn a finished dump into FSELF afterwards (with undo)
• Unfinished dumps are found and can be cleared away

DLC

• DLC mounted with a title is dumped along with it, each as a folder of its own next to the game
• Can be switched off in the settings ("Dump DLC along")

Web interface

• Settings page behind the menu, a home-screen shortcut on the console and a QR code for your phone
• Other devices need a code shown on the TV before they can change anything
• Shows install progress, and refuses titles that are still installing
• Titles are named in the console's language

Payload

• Runs as a single instance; sending it again replaces the running copy
• Stores itself in Payload Manager (pldmgr)
• A running dump can be stopped without losing the queue
• Works without a USB drive: settings and logs go to the console storage

For developers​

The web server, settings and page kit come from
webhb 0.4.1, which the build
fetches into ext/webhb on its own.

If that download does not work, webhb-0.4.1.tar.gz is attached to this
release. Build with:

WEBHB_TARBALL=webhb-0.4.1.tar.gz make
The archive is checked against the sha256 in webhb.lock.

What's Changed​

• Fix PS4/PS5 package extraction by @domeOo in #13
• Add a web interface by @domeOo in #14
• Dump queue, disc-aware titles and a home-screen shortcut by @slopmaster33 in #15
• Single instance, payload store in pldmgr, stop and unfinished dumps by @slopmaster33 in #16
• Web-homebrew core, access code, settings page, console storage by @slopmaster33 in #17
• Launch and install detection, Dumps library by @slopmaster33 in #18
• webhb as a project of its own, pinned as a release by @slopmaster33 in #19
• Install detection, FSELF after the fact, title names, ShadowMount launch by @slopmaster33 in #20
• Builds for testers by @slopmaster33 in #21
• Dump the DLC mounted with a title by @slopmaster33 in #25

New Contributors​

• @domeOo made their first contribution in #13
• @slopmaster33 made their first contribution in #15

Full Changelog: v1.11...v2.00

Link: https://github.com/EchoStretch/ps5-app-dumper/releases/tag/v2.00

 

[kevin corms]

I am in a hurry but I wanted to shed some light: there were some issues with payloads and they removed them from the repo, so now only the bare minimum jailbreak is done, there is no R2 message because there is no integrated payloads. But you don't need that; you have 9021 port listenning and you must send the kstuff payload yourself ( use the 1.11 one, from EchoStretch, that is a bit more.. "complete" and after the kstuff loads you can send the webkit installation one ( use itsPLK's Webkit Autoloader 0.5.0 one ). You just need kstuff and webkit installer for installing offline autoloader. Then reboot. Then you will add shadowmount and other things little by little. Have to go now but I may check in a couple of hours or tomorrow morning...

It says there is a shortcut on my ps5 homescreen for autoloader after pushing it, but I dont see it anywhere. It seems to work though, just a weird message.

 

[HS2005]

It says there is a shortcut on my ps5 homescreen for autoloader after pushing it, but I dont see it anywhere.

Media tab?

Example:

 

[kam821]

It says there is a shortcut on my ps5 homescreen for autoloader after pushing it, but I dont see it anywhere. It seems to work though, just a weird message.

If you're using Payload Manager repo - don't forget to launch the webkit autoloader installer payload after downloading it, I had such a brainfart moment

 

[kevin corms]

If you're using Payload Manager repo - don't forget to launch the webkit autoloader installer payload after downloading it, I had such a brainfart moment

Im mostly just adhd and excited

 

[TheStonedModder]

the keys may or may not leak soon I was told..just want to cover bases that I am NOT involved if it happens

Someone is mad that I didnt spoon feed them and feels like they want to cause drama. I was told.

That is why it may or may not be true...either way just in case. Wanted to post here early. This is the last time I mention anything like this

I just want to be left alone and make cool shit, but people arent happy unless there is shit stirring

 

[kevin corms]

I can get a game to load, so i guess its working.

 

[TheStonedModder]

what did I break? FW 13.4

 

[MadonnaProject]

That depends.... If you like my answers.



On the FTP. Go to this folder: /data/etaHEN/cheats/
Place the cheats .json, .mc4, .shn there. The cheat must match the game ID (so CUSA/PPSA) and version number e.g 1.004, v1.000 etc. If you place it there can you instantly check the cheats via the game.

FYI; etaHEN can only load one cheat. If you have 2 cheats for example a .json and .mc4 it will load one of them. I removed a couple of dupes that had like 3 cheats and replaced it with one version that has more or better cheats.

Example below:

View attachment 593187

Thank you, I just had to delete and reinstall the game again using shadow mount and the cheats work for all now.

 

[kam821]

what did I break? FW 13.4

View attachment 593218

https://github.com/itsPLK/ps5-webkit-autoloader/issues/16

 

[TheStonedModder]

View attachment 593219https://github.com/itsPLK/ps5-webkit-autoloader/issues/16

reading aint my strong suit today, thank you

 

[johnplaystation]

Wouldn't the solution to that be to dump them and reinstall them as fPKGs?

I have around 5TB installed so a simple "remove disc check" option would be better than reinstalling everything as fPKGs. Pretty unrelistic though from what I read.

 

[Inaki]

I have around 5TB installed so a simple "remove disc check" option would be better than reinstalling everything as fPKGs. Pretty unrelistic though from what I read.

In theory:

a) we can do delta FPKGs that just overwrite some files. We already do this for backports where a delta FPKG installs de backport files only.

b) having decyrpted eboot.bin and sce_modules folder .sprx files ( libraries ) decrypted ( this happens automatically when you use a dumping payload ) and fake signed ( this used to be done manually but I think FPKG builder apps/scripts can take care of them now; or you can use the fakesigning tool to do so ) effectively makes a game directly runnable because the fake signature and the code being not encrypted; there is no patch needed. I am wondering about some adaptation needed in the param.sfo file, maybe it is needed, but it is a silly thing.

So yeah, I think this is doable, but we better ask the gurus

 

[ahistoryofviolence]

What is the best application for packing extracted folders into single-file formats such as .exfat or compressing into .ffpfsc?

There is a plethora of random vibe-coded programs floating around online that I am reluctant to run on my system and game-compressor does not seem to run on the current 13.60 jailbreak for now.

Also hello! I have been lurking this forum off and on for many years but I have now finally become a poster

 

[MohammedQ8]

I am thinking of taking out 2tb nvme ssd from my retail ps5 and put it in my jailbreaked ps5

The prices is doubled now unfortunately for the same nvme