Been working on a console with some bug damage. Replaced a cap near the Wifi and now boots fine. After being on for a period of time, screen will turn black and console will abruptly turn off about 3 seconds later. I have also attempted a new power supply and the problem remains.
UART seems to be an unknown code. Disregard 00 as that was me forcing the shutdown. It the other three codes just repeat.
Outside of reflowing/replacing the wifi module or 12V power mosfets in hopes of finding a bad solder joint, i'm somewhat at a loss.
When its on, the console functions perfectly fine... The last thing I can comment on -- The first time this turns off, it may take 10 minutes. If I turn it back on, it fails MUCH faster (1-2 minutes). This leads me to my assumption of a solder joint issue but I have no real additional evidence of same.
Any other wise suggestions I should look at? Anyone seen that uart code before?
-------------
Slot #] [Date Time] [Error Code] [Priority] [Error Message]
00 3/12/2025 11:59:52 AM 80C00140 Low MainSOC_FORCEOFF(TitaniaGPIO) - APU Halt (No Response) - Forced Power Off Via Power Button
|-(OK 00000000 80C00140 0009EB2C 15000005 10010000 217B 0036 2576 16A7:04)
01 3/9/2025 9:04:06 PM C0020303 Low APU Not Responding - Trying Init or Reboot - 3 - (User Submitted: System wont start Blue Light Flashes), Check Fuses F3501, F7501
|-(OK 00000000 C0020303 0006763A 81BF00F6 10000100 217B 0036 2DA6 1653:2C)
02 3/9/2025 9:04:05 PM C0020303 Low APU Not Responding - Trying Init or Reboot - 3 - (User Submitted: System wont start Blue Light Flashes), Check Fuses F3501, F7501
|-(OK 00000000 C0020303 00067639 81BF00F6 10000100 217B 0036 2DA4 1650:1F)
03 3/9/2025 9:04:05 PM 80060004 High Not found in list. Report Findings.
|-(OK 00000000 80060004 00067639 81BF0005 10000100 2179 0036 2DA4 1650:F6)
UART seems to be an unknown code. Disregard 00 as that was me forcing the shutdown. It the other three codes just repeat.
Outside of reflowing/replacing the wifi module or 12V power mosfets in hopes of finding a bad solder joint, i'm somewhat at a loss.
When its on, the console functions perfectly fine... The last thing I can comment on -- The first time this turns off, it may take 10 minutes. If I turn it back on, it fails MUCH faster (1-2 minutes). This leads me to my assumption of a solder joint issue but I have no real additional evidence of same.
Any other wise suggestions I should look at? Anyone seen that uart code before?
-------------
Slot #] [Date Time] [Error Code] [Priority] [Error Message]
00 3/12/2025 11:59:52 AM 80C00140 Low MainSOC_FORCEOFF(TitaniaGPIO) - APU Halt (No Response) - Forced Power Off Via Power Button
|-(OK 00000000 80C00140 0009EB2C 15000005 10010000 217B 0036 2576 16A7:04)
01 3/9/2025 9:04:06 PM C0020303 Low APU Not Responding - Trying Init or Reboot - 3 - (User Submitted: System wont start Blue Light Flashes), Check Fuses F3501, F7501
|-(OK 00000000 C0020303 0006763A 81BF00F6 10000100 217B 0036 2DA6 1653:2C)
02 3/9/2025 9:04:05 PM C0020303 Low APU Not Responding - Trying Init or Reboot - 3 - (User Submitted: System wont start Blue Light Flashes), Check Fuses F3501, F7501
|-(OK 00000000 C0020303 00067639 81BF00F6 10000100 217B 0036 2DA4 1650:1F)
03 3/9/2025 9:04:05 PM 80060004 High Not found in list. Report Findings.
|-(OK 00000000 80060004 00067639 81BF0005 10000100 2179 0036 2DA4 1650:F6)
