PS4 Linux bzImage

[SMNFXCN]

Trying to install Manjaro PS4... but the thing that's holding me back is the bzImage
for some reason, there isn't a single bzimage that works for me, from what i have been trying.
I'm using a PS4 Slim, loading mira through payload guest, after using auto goldhen through al azif's host.
after i load mira, then i load ps4loader and the screen goes black, after that the console beeps and then powers off.
Can someone help me get it booting into linux?
Edit: it's CUH-2215B, btw
update: issue has been resolved.

 

[jp99k]

I've been experiencing similar problems trying to get Linux up and running on my PS4 Pro CUH-7015B. I can load Mira on the Payload guest but when I try the linux loader (I've tried 1 & 2gb) this usually occurs:

1.) external hdd/ssd begins flashing
2.) screen goes black / PS4 light turns white
3.) PS4 and usb storage turn off

I have also been successful loading other payloads like enable-browser on payload guest, and it seems like Mira runs fine. I'm new to ps4 homebrew/linux so any pointers would be appreciated!

 

[szczuru]

I have slim 2016 but maybe this will help:
https://gbatemp.net/threads/working...4pros-on-6-72-and-distros.572063/post-9712920

 

[SMNFXCN]

update: it's working now. followed this tutorial, using their bzimg/initramfs and it turns out it was the display not playing nicely with it, i used a different display and it's working now.

 

[SMNFXCN]

nvm wifi isn't working bruh

 

[SMNFXCN]

well ethernet does work...
what command would i use to update catjaro/arch without overwriting the graphics drivers

 

[jp99k]

update: it's working now. followed this tutorial, using their bzimg/initramfs and it turns out it was the display not playing nicely with it, i used a different display and it's working now.

I tried it on a different monitor and used the payload sender from the Crumps Github and it's installing right now, big thanks!

I also used the belize 4.14 bzimage from the Hakkuraifu github as well as the psxitarch initramfs and os

 

[SMNFXCN]

my only issue now is that idk how to update manjaro without overwriting the ps4 drivers

 

[MrDoggus]

i used a different display

Thank you for the solotion! Just wondering, why output gets lost with some displays?

 

[SMNFXCN]

Thank you for the solotion! Just wondering, why output gets lost with some displays?

not sure, i think it was because the display i was using at first was quite old, it needed an hdmi to vga adapter (it worked in orbis os so idk what was the issue) vs my 4k tv (which worked just fine)

 

[Donnie-Burger]

I have a tv that black screens and a different TV worked. Pretty sure its a resolution issue.

 

[SMNFXCN]

I have a tv that black screens and a different TV worked. Pretty sure its a resolution issue.

both were outputting to 1080p pretty sure, and that's what the ps4 was set to

 

[MrDoggus]

not sure, i think it was because the display i was using at first was quite old, it needed an hdmi to vga adapter (it worked in orbis os so idk what was the issue) vs my 4k tv (which worked just fine)

I tried on my main monitor (1080p 144hz) and it given me a black screen, then, i tried to connect the ps4 to my TV (1080p 60hz) and worked flawlessly. I will try something else like 720p or lower

 

[Thefirebeast]

I also have a CUH-2215B. It would be GREAT if they released a baikal kernel that worked on more than just a handful of displays. I have tried on 1 1080i monitor, 1 1080p monitor. 1 720p tv, and 3 4k tvs. Out of those 6 displays only 1 4k tv worked, no luck with the other 5 displays.
wiki confused me, i have a belize one

 

[keyzzz]

Hello, when I payload nothing happens on my ps4 slim CUH-2216B with baikal b1 (Ox30201) I tried all the bzimage can anyone help me?

 

[mircoho]

What do you mean nothing happens? if you really tried them all you should get a crash with the wrong bzImage?
PS4 firmware?

 

[keyzzz]

What do you mean nothing happens? if you really tried them all you should get a crash with the wrong bzImage?
PS4 firmware?

i receive the payload and nothing happens no black nothing not even a crash

 

[mircoho]

Firmware Version?
5.05 - 6.72 you have to use the valetinbreiz source all higher firmware the source from sleirsgoevy and with PPPwn Exploit make sure you have the latest GoldHEN Beta version 17.3

 

[keyzzz]

Firmware Version?
5.05 - 6.72 you have to use the valetinbreiz source all higher firmware the source from sleirsgoevy and with PPPwn Exploit make sure you have the latest GoldHEN Beta version 17.3

thanks for the help i just had to upgrade to the recent version of goldhen but now wifi and bluetooth don't work on linux fedora df aus i should probably change distros

 

[mircoho]

Ye with that i can not help you, sorry.