Homebrew RELEASE pPlay: switch video player

[proconsule54]

You also have the chance of a lifetime to finally add a good icon to this homebrew

Yes the icon is a little bit ugly. But i am the worst graphic designer in the world!

 

[docgold]

@docgold
i should have fixed the regex for your decoder, now it will print the channels list.

can you send me the result of /web/epgnow?bRef=1:7:1:0:0:0:0:0:0:0 (for epg integration)
so i can make a more consistent build.
thanks

GB800 SE and openLD works but sadly Dreambox One doesn't. Bouquets are not shown.

 

[proconsule54]

GB800 SE and openLD works but sadly Dreambox One doesn't. Bouquets are not shown.

I expect that, is GB800 SE working good with epg of current event?

I am working to find out how to support Dreambox One.

 

[proconsule54]

You also have the chance of a lifetime to finally add a good icon to this homebrew

I am the worst graphic designer in the world!
If someone skilled to do a better icon can post here the samples!

 

[proconsule54]

@docgold
try on Dreambox One with:

/web/getservices?sRef=1:15:fffffffe:12:ffffffff:0:0:0:0:0:

and

/web/getservices

and post the results

probably an empy sRef give error on that decoder (not on others).

 

[tataniko]

@proconsule54

Did you find anything about performance issue?
Also, our kids request to add battery percentage (%) to the status bar of Pplay.
Keep up the good work & thank you.

 

[proconsule54]

Did you find anything about performance issue?
Also, our kids request to add battery percentage (%) to the status bar of Pplay.
Keep up the good work & thank you.

Yes i am working on performance, i have some ideas.
the battery % is simple to add so it will be in the next release for sure!

 

[docgold]

@docgold
try on Dreambox One with:

/web/getservices?sRef=1:15:fffffffe:12:ffffffff:0:0:0:0:0:

and

/web/getservices

and post the results

probably an empy sRef give error on that decoder (not on others).

GB800: Enigma2-TV works but after a some time picture is freezing and SXOS crashes.

On the E2 screenshot you can see that the currently watched ts stream makes it impossible to zap within the receiver. Exit on pPlay doesn't open the zapping functionalty on receiver. Only E2 restart solves the problem.
Maybe (webif-) zapping via pPlay is an further option?

After selecting Enigma2 only the current available EPG is listed. There is no interactive updating.

Extended latin alphabets like Ü,Ä, ... are not displayed correctly. See picture.

DM One: ftp streaming from /media/hdd works till suddenly the picture gets blurred. Audio still working while picture freezing.
Stoping the movie and restart from this point solves problem. If I do not stop it within a short time window, SXOS is crashing.
Error messages.

After all of this crashes I have problems to get SXOS bootet with my NS Atmopshere payload injector.

 

[proconsule54]

Ok @docgold thanks for your debugging.
Extended chars will be fixed as soon as i get UTF8 working.
The crash on live tv will probably be fixed when i resolve the performace issue (i suspect it has a cpu peak).
Dreambox One will be fixed also with the log you provided.
Thanks!

 

[proconsule54]

Sorry for the delay but i want to deliver code that is as good as i can.
But expect a release in the next days with many fix and new features

Also if someone skilled in icon design can provide a better icon? Thanks

 

[tataniko]

@proconsule54
The video decoder performance will be the same or better in your fork than Pplay 3.5?
I have seen your question on libnx about Video HW decoder, but there is no answer yet.
How is possible that, Pplay3.5 is much better in performance than your fork 4?
If you solve the performance issue, then your fork will be the best media player on Switch.
Thanks & keep up the good work.

 

[proconsule54]

Performance diff may be in the ffmpeg complied in. i suspect that the ones bundled in 3.5 was a custom build one. but anyway i am working on making it the fastest possible.
HW decoder inst possible at the moment but i am sure it will be there in a not so long time.

 

[proconsule54]

Added battery % to status bar
Extended the Overlay info (with gpu load, mem and the current Hz of CPU,GPU,MEM)
Fix for Enigma2 on Dreambox One
Mitigate a lot the exit crash (not sure if is 100% but a lot less than before)

Need to test all and is ready for release!

 

[Storm21]

@proconsule54

Hello
Thanks for your work! Here is an icon that I always use... It is original as far as I know from BodyXY. It's old but beautiful...

 

[proconsule54]

Release

https://github.com/proconsule/pplay/releases/tag/v3.5-fork-v5

Changelog:

• Added CPU/GPU/MEM Meter
• Changed Font
• Fix for Dreambox One decoder (hope so)
• Added Battery %
• Small fixes

Hope you all enjoy this release!

I really need a new icon (@Storm21 thanks for your icon but i need an original one made by known author) so help me on that!

 

[Storm21]

@proconsule54 Icon is from @bodyXY He has liked the posting, think is ok. Or ask him...

 

[tataniko]

@proconsule54
Pplay 3.5 fork 5 is not running on AMS 1.1.1 FW 13.0.0
It crashes immediately, error occurred, software closed.
Fork 4 is running & stable on AMS 1.1.1 FW 13.0.0.

 

[docgold]

Still doesn't work with One.

 

[proconsule54]

@proconsule54
Pplay 3.5 fork 5 is not running on AMS 1.1.1 FW 13.0.0
It crashes immediately, error occurred, software closed.
Fork 4 is running & stable on AMS 1.1.1 FW 13.0.0.

Very Very Strange!!!
I know it has issue with some tesla overlay.
I only used the sys-clk for setting power saving freqs.
Can you test on lower fw and let me know!
Sorry for this issue

I tested it on FW 12.10 and AMS 1.0.0

 

[proconsule54]

Still doesn't work with One.

Too bad, i will try to find a DM One to test it (i can only simulate).
Sorry for this issue.

It works well other than DM One?