Homebrew postLoader4

[GartimusPrime]

perhaps I am stupid and misunderstood something.....I installed the new postLoader2 priiloader forwarder and when it loads PL, up on the top it says that I am in NEEK status. So I installed the postLoader 1 forwarder and it worked properly.....

 

[stfour]

perhaps I am stupid and misunderstood something.....I installed the new postLoader2 priiloader forwarder and when it loads PL, up on the top it says that I am in NEEK status. So I installed the postLoader 1 forwarder and it worked properly.....

Do you mean priibooter.dol under priiloader or the forwarder by albatroz ?

 

[GartimusPrime]

@stfour...in b17 when I select update title cache nothing happens on real nand

 

[GartimusPrime]

@stfour...in b17 when I select update title cache nothing happens on real nand
and on emu nand U does not show up

Posts merged

QUOTE(GartimusPrime @ Jul 14 2011, 11:34 PM) perhaps I am stupid and misunderstood something.....I installed the new postLoader2 priiloader forwarder and when it loads PL, up on the top it says that I am in NEEK status. So I installed the postLoader 1 forwarder and it worked properly.....

Do you mean priibooter.dol under priiloader or the forwarder by albatroz ?

the one by albatroz

 

[stfour]

@stfour...in b17 when I select update title cache nothing happens on real nand

I've test in both real and neek (real) and it works for me...

QUOTE(GartimusPrime @ Jul 14 2011, 11:48 PM) the one by albatroz

I think it is because you have "neek" in xml...

 

[GartimusPrime]

QUOTE(GartimusPrime @ Jul 14 2011, 04:44 PM)
@stfour...in b17 when I select update title cache nothing happens on real nand
and on emu nand U does not show up
Even though I need U to show up on real nand

Posts merged

@stfour...in b17 when I select update title cache nothing happens on real nand

I've test in both real and neek (real) and it works for me...

QUOTE(GartimusPrime @ Jul 14 2011, 11:48 PM) the one by albatroz

I think it is because you have "neek" in xml...

ok I will check

 

[stfour]

QUOTE(GartimusPrime @ Jul 14 2011, 04:44 PM)

and on emu nand U does not show up

Have you checked "other" in the filters ?

 

[GartimusPrime]

QUOTE(GartimusPrime @ Jul 14 2011, 04:44 PM)
@stfour...in b17 when I select update title cache nothing happens on real nand
and on emu nand U does not show up
Even though I need U to show up on real nand

Posts merged

@stfour...in b17 when I select update title cache nothing happens on real nand

I've test in both real and neek (real) and it works for me...

QUOTE(GartimusPrime @ Jul 14 2011, 11:48 PM) the one by albatroz

I think it is because you have "neek" in xml...

ok I will check

nope I have no idea what I have done wrong but when I update title cache on real nand nothing happens.......

 

[stfour]

nope I have no idea what I have done wrong but when I update title cache on real nand nothing happens.......

Are you under neek ? Or are you under standard nand and neek is showed anyway ? After you update titles witch ios is reported on the upper right corner ?

 

[GartimusPrime]

nope I have no idea what I have done wrong but when I update title cache on real nand nothing happens.......

Are you under neek ? Or are you under standard nand and neek is showed anyway ? After you update titles witch ios is reported on the upper right corner ?

I am not under neek...when I start PL in the corner it say AHPBROT - Real NAND. when I select update title cache nothing happens at all....and it is b17

 

[stfour]

nope I have no idea what I have done wrong but when I update title cache on real nand nothing happens.......

Are you under neek ? Or are you under standard nand and neek is showed anyway ? After you update titles witch ios is reported on the upper right corner ?

I am not under neek...when I start PL in the corner it say AHPBROT - Real NAND. when I select update title cache nothing happens at all....and it is b17

I need to know the ios before title update and after...

 

[GartimusPrime]

nope I have no idea what I have done wrong but when I update title cache on real nand nothing happens.......

Are you under neek ? Or are you under standard nand and neek is showed anyway ? After you update titles witch ios is reported on the upper right corner ?

I am not under neek...when I start PL in the corner it say AHPBROT - Real NAND. when I select update title cache nothing happens at all....and it is b17

I need to know the ios before title update and after...

it starts with ios 58 AHPBROT - Real NAND then I do the title cache update. When it finishes and nothing shows up it ends with IOS249 Real NAND

 

[stfour]

it starts with ios 58 AHPBROT - Real NAND then I do the title cache update. When it finishes and nothing shows up it ends with IOS249 Real NAND

Right, does it show the window with hourglass counting titles ? How many titles/channels you have ?

Please, try this one

CODEpostLoader2 b18

* Corrected a (quite probabily) memory corruption after refreshing titles cache

 

[GartimusPrime]

it starts with ios 58 AHPBROT - Real NAND then I do the title cache update. When it finishes and nothing shows up it ends with IOS249 Real NAND

Right, does it show the window with hourglass counting titles ?

yes but I realize now that I have no standard channels on the wii anymore...i.e. Internet Channel, Wii Shop Channel. I have a CFG USB Loader Forwarder, the Homebrew Channel and 157 of the CRAP channels. Perhaps none of them are compatible....

sorry misread, it does not show hour glass or counting titles......

 

[FIX94]

Thanks, will add it now to my forwarder

May I'm thinking wrong at some point, I added it to the main.c of the app booter and said:
CODEÂÂÂÂif (IsDollZ(exeBuffer) == true)
ÂÂÂÂÂÂÂÂexeEntryPointAddress = load_dol_image(exeBuffer, NULL);
ÂÂÂÂelse
ÂÂÂÂÂÂÂÂexeEntryPointAddress = load_dol_image(exeBuffer, &args);

For some reason this never occur... If I set it to NULL in general it works fine but why doesn't it work on that way?

 

[stfour]

it starts with ios 58 AHPBROT - Real NAND then I do the title cache update. When it finishes and nothing shows up it ends with IOS249 Real NAND

Right, does it show the window with hourglass counting titles ?

yes but I realize now that I have no standard channels on the wii anymore...i.e. Internet Channel, Wii Shop Channel. I have a CFG USB Loader Forwarder, the Homebrew Channel and 157 of the CRAP channels. Perhaps none of them are compatible....

sorry misread, it does not show hour glass or counting titles......

hbc is skipped for sure...

EDIT: grrrr... also U is skipp

 

[stfour]

postLoader2 b19

* U channels are now scanned

Try it and let me know... 10 minutes and I go to the bed

 

[FIX94]

Try it and let me know... 10 minutes and I go to the bed

Noooo please answer my question on the previous site first

 

[stfour]

Thanks, will add it now to my forwarder

May I'm thinking wrong at some point, I added it to the main.c of the app booter and said:
CODEÂÂÂÂif (IsDollZ(exeBuffer) == true)
ÂÂÂÂÂÂÂÂexeEntryPointAddress = load_dol_image(exeBuffer, NULL);
ÂÂÂÂelse
ÂÂÂÂÂÂÂÂexeEntryPointAddress = load_dol_image(exeBuffer, &args);

For some reason this never occur... If I set it to NULL in general it works fine but why doesn't it work on that way?

Sorry FIX... I've lost your post... it should be right !

I have to admit that I've tested again and sometimes seems not work... maybe need to invalidate memory before checking. I try. But I'm quite sure that the pattern is unique for dollz. I've tryed to compress different dol.

Worning: b19 has wrong internal build number but the packet is right.

 

[FIX94]

Sorry FIX... I've lost your post... it should be right !

I have to admit that I've tested again and sometimes seems not work... maybe need to invalidate memory before checking. I try. But I'm quite sure that the pattern is unique for dollz. I've tryed to compress different dol.

Worning: b19 has wrong internal build number but the packet is right.

No problem. It would be really amazing if you get it to work because nobody else was able (homebrew channel doesn't count btw

)