Pokemon Black/White - Which firmware/AP patch?

Discussion in 'M3 Adapter' started by Wapetufo, Mar 28, 2012.

Mar 28, 2012
  1. Wapetufo
    OP

    Newcomer Wapetufo Newbie

    Joined:
    Mar 28, 2012
    Messages:
    4
    Country:
    Gibraltar
    Ok so I am about to finish SS, and I'm going to play through Black/White next, but I am unsure as to which firmware I should be using (I have an M3 DS real), and which AP patch: I've heard the Rudolphs is the best (http://gbatemp.net/topic/217811-rudolphs-universal-childs-play-patch/) note that I am intending on playing the European or US versions.

    Thanks in advance! :)
     
  2. jimmyemunoz

    Member jimmyemunoz GBAtemp Advanced Maniac

    Joined:
    Feb 23, 2009
    Messages:
    1,958
    Location:
    Louisiana
    Country:
    United States
    Download "DS-Scene Rom Tool" and install it. Then.....
    1) Open the Program
    2) Click the little box, near the top on the right hand side, and point to the rom when the new menu opens
    3) Go to the fourth tab that runs along the top edge of the program
    4) It will be checked, but make sure the box that says "apply patch" is darkened
    5) Click on "export" and point in to your micro sd card and the patch will automatically be applied.
    6) Done! Go ahead and play!
    That tool is the best for patches..... B-)

    For your "firmware" you need this one.
     
  3. Wapetufo
    OP

    Newcomer Wapetufo Newbie

    Joined:
    Mar 28, 2012
    Messages:
    4
    Country:
    Gibraltar
    Cannot find that page (firmware) is what I get from that link :(
     
  4. Lacius

    Member Lacius GBAtemp Psycho!

    Joined:
    May 11, 2008
    Messages:
    3,908
    Location:
    St. Louis, Missouri
    Country:
    United States
    If you are using an M3DS Real, I believe this is the firmware you will want to use, as it's the only one I'm aware of that works on the M3DS Real and continues to receive updates. You do not need to patch your ROMs like jimmyemunoz says.
     
  5. Wapetufo
    OP

    Newcomer Wapetufo Newbie

    Joined:
    Mar 28, 2012
    Messages:
    4
    Country:
    Gibraltar
    do I need to download both firmware and DAT?
     
  6. Lacius

    Member Lacius GBAtemp Psycho!

    Joined:
    May 11, 2008
    Messages:
    3,908
    Location:
    St. Louis, Missouri
    Country:
    United States
    To play Pokemon Black/White, no; just the firmware will suffice. However, it is recommended that you always use the latest DAT so that newer games work.
     
  7. Wapetufo
    OP

    Newcomer Wapetufo Newbie

    Joined:
    Mar 28, 2012
    Messages:
    4
    Country:
    Gibraltar
    Ok thanks for the help guys ^^
     

Share This Page