Pc Won’t Recognize Switch

[methamz]

When I plug in the pc, it only charges Switch. Awoo etc. keeps saying “no usb found”. I already installed drivers. I can connect to Switch via Hekate USB Tool. My device on latest firmware on both sys and emu. What can I do to fix that problem?

 

[linuxares]

I'm not even sure Awoo works on the latest firmware.
Tried DBI for example?

 

[methamz]

I'm not even sure Awoo works on the latest firmware.
Tried DBI for example?

Yes, it does not work. It says “no usb device”

 

[linuxares]

Which driver did you install? Was it the libusbK?

https://zadig.akeo.ie/

 

[methamz]

I installed LibusbK on RCM mode with Zadig

 

[linuxares]

Try using the provided link. And see if it makes any difference. Just to cover the basics.

 

[methamz]

Try using the provided link. And see if it makes any difference. Just to cover the basics.

I tried but nothing changed

 

[linuxares]

I tried but nothing changed

But you can inject RCM?
Have you forcing USB 3.0 in Atmosphere?

EDIT: also try in a USB 2.0 port

 

[methamz]

But you can inject RCM?
Have you forcing USB 3.0 in Atmosphere?

I can inject RCM. I did not get the second question. I tried both USB3.0 and 2.0 on PC.

 

[linuxares]

If you use system_settings.ini is it this active?

[usb]
; Enable USB 3.0 superspeed for homebrew
; 0 = USB 3.0 support is system default (usually disabled), 1 = USB 3.0 support is enabled.
usb30_force_enabled = u8!0x1

If it say u8!0x1 then that can be the issue.

 

[methamz]

[usb]
; Enable USB 3.0 superspeed for homebrew
; 0 = USB 3.0 support is system default (usually disabled), 1 = USB 3.0 support is enabled.
; usb30_force_enabled = u8!0x0

Here is the my "system_settings.ini"

 

[linuxares]

Okey I'm really getting out of ideas. Something is obviously blocking your usb connection in the Switch I would say.
If you start DBI and enable MTP Responder, your computer should detect it.

 

[methamz]

Okey I'm really getting out of ideas. Something is obviously blocking your usb connection in the Switch I would say.
If you start DBI and enable MTP Responder, your computer should detect it.

Yes, after I start MTP Responder, my pc detects it.

 

[linuxares]

Then it's just Awoo that isn't working right?

 

[methamz]

Then it's just Awoo that isn't working right?

No, no. Even DBI usb method isnt working. It keeps saying "no usb connection". I am trying to install game via MTP Responder now.

 

[linuxares]

No, no. Even DBI usb method isnt working. It keeps saying "no usb connection". I am trying to install game via MTP Responder now.

Of course not, you need to use dbibackend.exe but the MTP method is a lot better.

 

[wilburie]

Try changing the cable you're using. Problems like these usually have really stupidly simple solutions.

 

[stanna]

Can confirm Awoo works on the latest firmware.

 

[roxzii]

Same exact problem! Switch charges but is not detected if it is connected by either of my laptop's USB-C ports. Mounting sd card in hekate is the only thing that works. USB-A 3.0 port also works fine. DBI MTP responder says it starts the server only if I connect the cable after opening the MTP responder, but nothing on laptop. Already tried disabling USB 3.0 on atmosphere's system settings, no difference. Also tested same switch, same cable, different PC, works fine. Can this have anything to do with the ports being thunderbolt?

 

[impeeza]

Guide on create and test connection and drivers:

https://gbatemp.net/threads/guide-to-setting-up-dbi-installer-over-usb.591075/post-10073789