Hacking Oled with picofly blink green no screen

[velocity86]

Hi, I try to install the picofly on my oled installation with the Flex cable and dat0 adapter.
When i try to boot up the switch the Blue light turbo on then 2x blink green, pause, 2x blink green, pause 2x blink green.
NO image on screen.
Same advice?

 

[thesjaakspoiler]

Sorry, thought you were using a hwfly.
The picofly uses long and short blinks to tell the error.
The color doesn't matter,
These are the codes for 2 blinks. You'll have to figure out if your blinks are short or long.

Error codes list (= is long pulse, * is short pulse):​

• ** RST is not connected
• *= CMD is not connected
• =* D0 is not connected
• == CLK is not connected

https://github.com/Ansem-SoD/Picofly