Hacking Old3ds blackscreen after a9lh install

[MistWisp]

Hello, i followed the plailect guide 100% correctly, but when i pressed install in the safea9lhinstaller that i entered through the browser exploit in 2.1 firmware version it said:
all checks passed
press any button to shutdown.
But after i tried to turn it on again, eternal black screen, no sound, nothing

PS: it keeps the blue led on even without the sd card

 

[chocoboss]

Even by following every step and understanding everything you can brick you 3DS some ppl will told you because of your SD, because you miss something, but nothing is perfect even A9HL installer.

 

[MistWisp]

Well i used the 4gb sd card that came with it, formated and checked, that sucks :/

 

[keyra]

Hello, i followed the plailect guide 100% correctly, but when i pressed install in the safea9lhinstalled that i entered through the browser exploit in 2.1 firmware version it said:
all checks passed
press any button to shutdown.
But after i tried to turn it on again, eternal black screen, no sound, nothing

PS: it keeps the blue led on even without the sd card

just put the armloaderhax.bin on sd....

 

[kublai]

Hello, i followed the plailect guide 100% correctly, but when i pressed install in the safea9lhinstalled that i entered through the browser exploit in 2.1 firmware version it said:
all checks passed
press any button to shutdown.
But after i tried to turn it on again, eternal black screen, no sound, nothing

PS: it keeps the blue led on even without the sd card

Hello, i followed the plailect guide 100% correctly, but when i pressed install in the safea9lhinstalled that i entered through the browser exploit in 2.1 firmware version it said:
all checks passed
press any button to shutdown.
But after i tried to turn it on again, eternal black screen, no sound, nothing

PS: it keeps the blue led on even without the sd card

Did you use SafeA9LH installer newer than v2.0.3? If you did than you bricked your O3DS.

 

[MistWisp]

Did you use SafeA9LH installer newer than v2.0.3? If you did than you bricked your O3DS.

Nope, used v2.0.3

and my o3ds turn on without the SD card, keeps the blue ilght on and with the black screen

 

[kublai]

Nope, used v2.0.3

and my o3ds turn on without the SD card, keeps the blue lIght on and with the black screen

I had the same symptom on mine but I used AfeA9LHInstaller v2.66 which was for the New3ds. I would try the safe restore key combos to see if you can revive it.

 

[MistWisp]

I had the same symptom on mine but I used AfeA9LHInstaller v2.66 which was for the New3ds. I would try the safe restore key combos to see if you can revive it.

I's on 2.1 firmware so no safe mode, the key combo doesn't work (tried it)
I'll probably get a hardmod for it and restore the 9.2 backup then continue from there

 

[kublai]

I's on 2.1 firmware so no safe mode, the key combo doesn't work (tried it)
I'll probably get a hardmod for it and restore the 9.2 backup then continue from there

I ended up sending mine out to be hardmodded and waiting to get it back. Hopefully all the other entry points still work so I can reinstall A9LH when I get it back. There's a thread on here with trusted hardmodders in your region.

 

[BlueFox gui]

And that's why I did not install a9lh

 

[MistWisp]

And that's why I did not install a9lh

to be fair, i installed a9lh in over 35 Old3DS and 23 New3DS (OTPless) and this is the only time i got a brick

 

[BlueFox gui]

to be fair, i installed a9lh in over 35 Old3DS and 23 New3DS (OTPless) and this is the only time i got a brick

well, i have only one 3DS if i brick him i will not able to buy another

 

[konsolenumbau.expert]

did even more and NEVER had a brick Upps i had with OTPless on a new 3DS ONCE. no prob with hardmod soo.
To "ban" the A9 cause of the chance you could brick... that needs to be deceided from each individual itself i guess....

 

[overlordeasy]

Do you have the arm9loaderhax.bin on the sd and if so can you view the luma settings?

 

[HyperT]

Hello, i followed the plailect guide 100% correctly, but when i pressed install in the safea9lhinstalled that i entered through the browser exploit in 2.1 firmware version it said:
all checks passed
press any button to shutdown.
But after i tried to turn it on again, eternal black screen, no sound, nothing

PS: it keeps the blue led on even without the sd card

Anything in the cart slot & have you tried booting luma payloads [.bins]?

 

[MistWisp]

Do you have the arm9loaderhax.bin on the sd and if so can you view the luma settings?

Yes i have it in the sdcard and no i can't see the settings, it's all black

Anything in the cart slot & have you tried booting luma payloads [.bins]?

Nothing in the cart slot and i have luma payloads [hourglass too] in sd card

 

[Deleted User]

Did you do this on a old or new 3ds? I put a9lh on my old 3ds xl around the end of November and I ended up with no issues whatsoever.

 

[MistWisp]

Old3ds
it was fixed already with a hardmod though

 

[Bedel]

Old3ds
it was fixed already with a hardmod though

I have one question: did you even tried to lunch decryp9 or hourglass9? So you can restore the original nand. 2.1 have some problems sometimes when lunching with Luma, so if the 3DS started without power off, then you may were able to lunch decrypt9 and recover.

Even by following every step and understanding everything you can brick you 3DS some ppl will told you because of your SD, because you miss something, but nothing is perfect even A9HL installer.

I have to say it: this is untrue. It only fails due to user error or SD error afaik.

 

[HyperT]

Old3ds
it was fixed already with a hardmod though

Did you get any sort of diagnostic back on it? Like did they pull another nand dump and check if they could see something wrong?