Hacking RELEASE [Official] ReiNX thread [DEAD]

[SuMucheng]

go here and it's in the pinned section
https://discord.gg/NxpeNwz

Ok, thanks alot for your help . really appreciated.

 

[Adran_Marit]

Ok, thanks alot for your help . really appreciated.

No worries

 

[Pluupy]

Check out ChoiDuJourNX.
https://gbatemp.net/threads/choiduj...ller-homebrew-for-the-nintendo-switch.513416/

Get a firmware from either a suitable XCI file, or from *cough* that X bin place.
Put the folder on your SD card.
Put the .nro for choisdujour in your /switch folder.
Make sure fullsvcperm=1 is in your hekate ini file
Start hekate, run the installer
Pick the folder containing the update
Press the start button.

It will install autorcm for you, to ensure you never run ninty's boot loader, and burn your fuses.

What? We don't actually have to buy the games to do the fuseless update? We could just use an xci?

 

[Wierd_w]

What? We don't actually have to buy the games to do the fuseless update? We could just use an xci?

You have to extract it from a suitable XCI... You have been able to do that for some time now. Ask Raj.

 

[Pluupy]

You have to extract it from a suitable XCI... You have been able to do that for some time now. Ask Raj.

Lemme guess, it's illegal so the guide just tiptoes about the acquisition of the game and ergo the game update?

 

[aarti]

Download https://www62.zippyshare.com/v/bEiUbDme/file.html

What was that, the file is deleted?

 

[shchmue]

pluupy yep, unless you own the game! just use xbins tbh

aarti that's a super old non legal version of the stash, disregard

 

[mariogamer]

what are those layered fs issues exactly? Error codes? Something else?

 

[d3xterr]

Hi, ReiNX doesnt boot on my 3.0.1 Switch. After injecting the payload, the splashscreen appears but after that, nothing happens and I have to shutdown the switch.

 

[Reisyukaku]

Hi, ReiNX doesnt boot on my 3.0.1 Switch. After injecting the payload, the splashscreen appears but after that, nothing happens and I have to shutdown the switch.

try removing the es patch in patches folder. tell me if that works

 

[d3xterr]

try removing the es patch in patches folder. tell me if that works

No doesnt work, again blackscreen. I tried rajnx which should work on every firmware but even this doesnt boot into cfw. I get this screen:

 

[Draxzelex]

@d3xterr Remove the fs_mitm.kip under the sysmodules folder under ReiNX. It enables LayeredFS but LayeredFS doesn't work on 3.X hence why its "breaking" your console.

 

[Reisyukaku]

No doesnt work, again blackscreen. I tried rajnx which should work on every firmware but even this doesnt boot into cfw. I get this screen:

r̶a̶j̶n̶x̶ ̶i̶s̶ ̶a̶ ̶m̶e̶m̶e̶ ̶l̶o̶l̶.̶ ̶i̶t̶s̶ ̶j̶u̶s̶t̶ ̶h̶e̶k̶a̶t̶e̶.̶ ̶S̶o̶ ̶i̶f̶ ̶y̶o̶u̶r̶ ̶s̶w̶i̶t̶c̶h̶ ̶d̶o̶e̶s̶n̶t̶ ̶w̶o̶r̶k̶ ̶w̶i̶t̶h̶ ̶R̶e̶i̶N̶X̶ ̶o̶r̶ ̶h̶e̶k̶a̶t̶e̶,̶ ̶t̶h̶e̶n̶ ̶t̶h̶a̶t̶s̶ ̶a̶ ̶w̶h̶o̶l̶e̶ ̶o̶t̶h̶e̶r̶ ̶i̶s̶s̶u̶e̶.̶
oh right, fs_mitm breaks things on 3.0.1 .. rip

 

[d3xterr]

@d3xterr Remove the fs_mitm.kip under the sysmodules folder under ReiNX. It enables LayeredFS but LayeredFS doesn't work on 3.X hence why its "breaking" your console.

Yep, tried it but doesnt work.

rajnx is a meme lol. its just hekate. So if your switch doesnt work with ReiNX or hekate, then thats a whole other issue.

lel, a user recommended it Well hekate works just the CFW doesnt boot.

 

[Draxzelex]

Yep, tried it but doesnt work.

What computer OS are you using? If you are using a MacOS or Windows 10, it might be contributing to the problem.

 

[d3xterr]

What computer OS are you using? If you are using a MacOS or Windows 10, it might be contributing to the problem.

Win10.

 

[salamandrusker]

r̶a̶j̶n̶x̶ ̶i̶s̶ ̶a̶ ̶m̶e̶m̶e̶ ̶l̶o̶l̶.̶ ̶i̶t̶s̶ ̶j̶u̶s̶t̶ ̶h̶e̶k̶a̶t̶e̶.̶ ̶S̶o̶ ̶i̶f̶ ̶y̶o̶u̶r̶ ̶s̶w̶i̶t̶c̶h̶ ̶d̶o̶e̶s̶n̶t̶ ̶w̶o̶r̶k̶ ̶w̶i̶t̶h̶ ̶R̶e̶i̶N̶X̶ ̶o̶r̶ ̶h̶e̶k̶a̶t̶e̶,̶ ̶t̶h̶e̶n̶ ̶t̶h̶a̶t̶s̶ ̶a̶ ̶w̶h̶o̶l̶e̶ ̶o̶t̶h̶e̶r̶ ̶i̶s̶s̶u̶e̶.̶
oh right, fs_mitm breaks things on 3.0.1 .. rip

t always happens to me in my 3.0.0 and I think it is because it is not tested before in that version, why everything goes smoothly in 5.1 and in 3.0.0 or 3.0.1 is it so difficult?
I know you are a teacher and you will find the solution but could you explain why things that work in 5.1 do not do it in 3.0.0? Thank you

 

[Draxzelex]

Win10.

Try either making sure the archive box is unchecked for all folders on your SD card (by right-clicking them and checking properties) or transferring the files onto your SD using a program known as Total Commander.

 

[szczuru]

t always happens to me in my 3.0.0 and I think it is because it is not tested before in that version, why everything goes smoothly in 5.1 and in 3.0.0 or 3.0.1 is it so difficult?
I know you are a teacher and you will find the solution but could you explain why things that work in 5.1 do not do it in 3.0.0? Thank you

Most propably: other memory/files offsets.

 

[cyris69]

You guys can post the xbins.org site since the files aren't actually hosted there/provided on the site. This came up in an old topic of mine and that was the conclusion a mod made. Also xbins were the easiest for me going from 2.0 to most recent without fuses burning..