O3ds 5.1 black icon with rx

Discussion in '3DS - Flashcards & Custom Firmwares' started by Psygnosis, Jun 29, 2016.

  1. Psygnosis
    OP

    Psygnosis Advanced Member

    Newcomer
    54
    0
    Jul 25, 2009
    Italy
    Hi all,
    My gf bought a o3ds with sys fw 5.1 I follow the guide to install RX via gateway/emu9, unlink nand.
    Rx 3.0 (but also 2.6) is installed properly I could boot RX with the qr code and access the menu by pressing L but if I try to boot RX to emunand it freeze. On "rxmode is booting".
    After I try to times all the procedure to create emunand and rx, I try one last thing:
    I've take all the file and folder (rxtool and root file) from my personal o3ds xl (with 9.2) and I've copied it on my gf SD card.
    And
    It works
    Why?
    The problem now it that when I boot rx on emunand I have 3 black icon that corresponds to 3 application that I've installed on my o3ds xl 9.2
    How can I get rid of that icons?
    Can I safe update emunand?
    Can you tell me why if I follow the guide and use rxtool from the original source it stucks on boot but if I copied an already installed rx it woks?
    Thank you a lot in advance

    Inviato dal mio LG-D802 utilizzando Tapatalk
     
  2. wormdood

    wormdood pirate booty inspector

    Member
    3,105
    1,274
    Jan 3, 2014
    United States
    behind a parental advisory sticker
  3. Psygnosis
    OP

    Psygnosis Advanced Member

    Newcomer
    54
    0
    Jul 25, 2009
    Italy
    I don't understand very well that guide.
    Do I need to update the o3ds to 9.2 first?
    And why rednand?

    Inviato dal mio LG-D802 utilizzando Tapatalk
     
  4. fikatr

    fikatr GBAtemp Advanced Fan

    Member
    880
    332
    Mar 29, 2016
    Turkey
    next to smea
    if your console is already on 9.2 just do part 3 if you dont want to install a9lh rednand is not necessary but you should install a9lh+luma if you want brick proof and %100 boot rate
    edit:rxtools is no longer being worked on and black icons mean you installed a cia in your nand
     
    Last edited by fikatr, Jun 29, 2016
  5. Psygnosis
    OP

    Psygnosis Advanced Member

    Newcomer
    54
    0
    Jul 25, 2009
    Italy
    No my console is on 5.1 but I'm going crazy that guide advice to update to 9.2 but i can't boot console in pasta mode...it stuck on black screen I really don't know what to do

    Inviato dal mio LG-D802 utilizzando Tapatalk
     
  6. fikatr

    fikatr GBAtemp Advanced Fan

    Member
    880
    332
    Mar 29, 2016
    Turkey
    next to smea
    you should update console using plaisysupdater just go the emunand and update to 9.2 then make a backup if you updated successfully make a backup of your emunand then flash it to sysnand
     
  7. Psygnosis
    OP

    Psygnosis Advanced Member

    Newcomer
    54
    0
    Jul 25, 2009
    Italy
    why? i try the sysupdater method (I did it on another console and everything goes well), with fbi inject in the h&s on sysnand =(
     
  8. fikatr

    fikatr GBAtemp Advanced Fan

    Member
    880
    332
    Mar 29, 2016
    Turkey
    next to smea
    Last edited by fikatr, Jun 29, 2016
  9. Temptress Cerise

    Temptress Cerise Miss Magic~ <3

    Member
    2,181
    1,417
    May 1, 2016
    United States
    Don't do this. Even if you just want a MenuHax+RedNAND//EmuNAND setup, stop at Part 4, End of Section 2. That way we have injected FBI into RedNAND//EmuNAND and also have proper NAND backups of SysNAND and EmuNAND//RedNAND.

    Also, that info sort of doesn't completely apply to OP, since we need to Update to 9.2, not downgrade. So we want to do the 9.2.0 Update section that actually applies to OP's complete firmware version.
    Link: https://github.com/Plailect/Guide/wiki/9.2.0-Update

    Use that chart OP, to figure the best method for your firmware version to get to 9.2 safely.

    Also, you could look into using my guide, which is an adapted version of Plailect's A9LH Guide, but with MenuHax users in mind, and address issues that Plailect's A9LH Guide won't cover when stopping short of finishing the guide.
    Link: http://gbatemp.net/threads/tutorial...s-full-menuhax-rednand-autoboot-setup.432499/

    However, if you are not scared to go the full A9LH route, and understand the risks involve in the process, then go for it, I guess. Your choice. Do what you want.

    And best of all, good luck~ ^_^
     
    Last edited by Temptress Cerise, Jun 29, 2016 - Reason: Linked wrong guide
    Psygnosis and Alex658 like this.
  10. Psygnosis
    OP

    Psygnosis Advanced Member

    Newcomer
    54
    0
    Jul 25, 2009
    Italy
    Sorry for the late answer
    your guide is pretty good indeed...but, Do I must need a cartridge hax?
     
  11. fikatr

    fikatr GBAtemp Advanced Fan

    Member
    880
    332
    Mar 29, 2016
    Turkey
    next to smea
    no need for cartridge if you have browserhax
     
  12. Psygnosis
    OP

    Psygnosis Advanced Member

    Newcomer
    54
    0
    Jul 25, 2009
    Italy
    Yes i have it of course...if I can run run any DAT file like emu9 or decrypt9 from a qrcode it's because I have the browser had right?!

    One question beside luma3ds, if I have another 3ds with RX 3.0 can I safe update emunand?

    Inviato dal mio LG-D802 utilizzando Tapatalk
     
  13. fikatr

    fikatr GBAtemp Advanced Fan

    Member
    880
    332
    Mar 29, 2016
    Turkey
    next to smea
    yea but dont use rxtools its outdated
     
  14. Psygnosis
    OP

    Psygnosis Advanced Member

    Newcomer
    54
    0
    Jul 25, 2009
    Italy
    Its for another 3ds xl that I have I don't want to change cfw now so I prefer to try to update emunand for now then when o have time change it to luma...
    The important is that its safe to update I have some game save that I care ;)

    Inviato dal mio LG-D802 utilizzando Tapatalk
     
  15. fikatr

    fikatr GBAtemp Advanced Fan

    Member
    880
    332
    Mar 29, 2016
    Turkey
    next to smea
    changing rxtools to luma is just copying all luma files to root then use luma to boot emunand
     
    Psygnosis likes this.
  16. MelonGx

    MelonGx GBAtemp Advanced Maniac

    Member
    1,630
    438
    Jan 8, 2009
    China
    9.2 solves black icon problem.
    That's all.
     
    Psygnosis likes this.
  17. Psygnosis
    OP

    Psygnosis Advanced Member

    Newcomer
    54
    0
    Jul 25, 2009
    Italy
    Sorry for necroposting.
    If I want to pass a o3ds from rxtool 3 to luma can I just substitute folders? she already had emunand with some cias installed does she loose everything?
    thank you
     
  18. ih8ih8sn0w

    ih8ih8sn0w Koreaboo

    Member
    1,655
    715
    Aug 22, 2015
    United States
    Hell
    You don't lose anything when switching cfws since every modern cfw should be able to read just about any form of emunand on the sd card (the exception I guess being having an emunand at the end of the sd card instead of the first thing, but if you have that setup, you probably know what you are doing)
     
  19. wormdood

    wormdood pirate booty inspector

    Member
    3,105
    1,274
    Jan 3, 2014
    United States
    behind a parental advisory sticker
    its your thread and you still have questions no need to apologize
    here is a guide to switch from rxtools to luma3ds
    [Tutorial] Updating from rxTools to Luma3DS

    and here is one for setting up luma3ds from scratch
    [Tutorial] Installing Luma3DS CFW (For 2DS,o3DS,N3DS - Full MenuHax+RedNAND+Autoboot Setup)

    btw luma3ds requires fw 7.1 minimum
     
    Last edited by wormdood, Jul 9, 2016