NTRBoot Released!

It's here!
ntrboot_checklist_2.png

Info


@Normmatt has created a way to run B9S .firm files from bootrom via a DSi Flashcard and a magnet! This works on every 3DS on any firmware version.

For installation without a PC, user @TheCyberQuake has created a pack which will automatically install B9S and copy over essential starter homebrew from the flashcard's SD to the 3DS's. This will mainly be used for PC-less B9S installations. If you have a PC with you, use 3ds.guide. Read more here: https://gbatemp.net/threads/481141/

How does this work?


This works because of a flaw in the bootrom. Before the bootrom boots the NAND, it checks to see if Start+Select+X is held down, and if the shell is closed. If these requirements are met, it will boot an NDS cartridge from the bootrom. This give that cartridge bootrom access. You might be wondering how you'd hold down buttons while the shell is closed, and why you need a magnet. If you put a magnet in a specific spot on the 3DS, it will go into sleep mode. Using this, you can boot the NDS cartridge with the buttons held down while in sleep mode! Using a reflashable flashcard, you can boot B9SInstaller using the flashcard, and easily install it on your 3DS.
The 2DS doesn't need a magnet since a switch puts it to sleep instead of a magnet.

What does this mean?


  1. Any 3DS model on any firmware can be hacked with minimal effort
  2. You can unbrick any 3DS model from any type of brick.
    - Remember, you don't need a NAND backup for this. Just do a CTRTransfer.
    - This does not apply to MCU bricks.
  3. Even consoles with fried NAND, or even the NAND chip physically removed, can use this
This is incredibly impressive stuff, and will most likely be released soon! edit: now!

FAQ


Q: Can Nintendo patch this?
A: Nope! Not without a new hardware revision.

Q: My flashcard is blocked by my firmware! Can I still use this?
A: Yes! The flashcard blacklist is not enabled on the bootrom.

Q: Why can't this work with my flashcard?
A: The installation requires you to flash NTRBoot to the flashcard's nand. Most DS flashcards, such as the original R4, have a ROM, which is not flashable.

Q: Can I install NTRBoot on my flashcard without another 3DS system?
A: If you can run NDS roms on your 3DS with it, then yes. If it's blocked on your 3DS version, then you'll need another 3DS system to use it.

Q: Will my 3DS flashcard work?
A: No, only the NDSi flashcards listed above.

Q: Will any other flash cards work?
A: Only the ones listed in the OP. However keep in mind that flashcards such as the DSTT, Supercard DS2 and R4 SDHC Dualcore are planned to be supported in the future.

Q: I tried to do this with my cartridge and it didn't work?
A: It doesn't work with regular DS cards.

Q: Can I unbrick from a ____ brick?
A: Considering the card has access to the bootrom, yes! This can unbrick any brick (except MCU), unless you've taken a knife to the motherboard.

Q: Can I install B9S on the latest firmware with this?
A: Again, since the card has access to the bootrom, you can do this easily! Just plug in your flashcard, boot up using the magnet and button combination, and install.

Q: Does this work on the New Nintendo 2DS XL?
A: Yes!

:arrow: Release
:arrow: Guide
:arrow: Free NTRBoot Flashing
:arrow: Free B9S Installations

Here is SciresM's post about this

Please see SciresM's presentation on bootromhax.
 
Last edited by Deleted member 381889,
Haaa.... finally ntrboot for R4i-SDHC is out after so long:toot::grog::toot::grog:
It's been unofficially out for the past 2 days by injecting the R4i B9S flash image onto other R4-SDHC carts but yeah an official release is cool. Fixed my bricked N3DSXL from early 2016 yesterday.
 
I need help for unbrick my o3ds i have use ntrboot now i have godmode9 but after make a ctrnand trsnsfert i have always the black screen arm11 error any idea please?
 
I need help for unbrick my o3ds i have use ntrboot now i have godmode9 but after make a ctrnand trsnsfert i have always the black screen arm11 error any idea please?
When does the arm11 screen happen? During the CTR transfer or after? Try temporarily renaming your Nintendo 3DS folder in case it is the fault of corrupt theme data.
 
When does the arm11 screen happen? During the CTR transfer or after? Try temporarily renaming your Nintendo 3DS folder in case it is the fault of corrupt theme data.
The screen appear at Lima boot i have no 3ds folder this 3ds was bricked since 2014

--------------------- MERGED ---------------------------

The screen appear at Luma boot i have no 3ds folder this 3ds was bricked since 2014
 
Randomly felt like putting it out there, but if someone in PA wants a free NTRBoot installation (meet-up, I don't feel like doing the mailing), I'm available for that. I had this thought today, a pure desire to install CFW on a 3DS, but at this point I need to buy one or do it for someone.
 
  • Like
Reactions: Majickhat55
Randomly felt like putting it out there, but if someone in PA wants a free NTRBoot installation (meet-up, I don't feel like doing the mailing), I'm available for that. I had this thought today, a pure desire to install CFW on a 3DS, but at this point I need to buy one or do it for someone.
If you are ever bored you can uninstall b9s and reinstall with ntrboot. I've done it multiple times to test my ntrpack
 
  • Like
Reactions: RustInPeace
  • Like
Reactions: RustInPeace
Do you have a guide for unbrick a 3ds please?my ctrnand seem To do nothing on my 3ds
Get Decrypt9 from https://github.com/d0k3/Decrypt9/releases and put the firm file in luma/payloads

Put the CTR transfer files in a folder called files9

Boot into the chainloader menu by holding Start on boot and select Decrypt9

Go to sysNAND options then CTR transfer (I think). Choose auto.
 
  • Like
Reactions: laharl22
Bit disappointed to find out the new r4isdhc release doesn't work on any carts 2013 or under :(

was hoping to unbrick two of my 2012 (new on label) r4isdhc.com carts
 
Last edited by Adeka,

Site & Scene News

Popular threads in this forum