NTRBoot Released!

It's here!
ntrboot_checklist_2.png

Info

@Normmatt has created a way to run B9S .firm files from bootrom via a DSi Flashcard and a magnet! This works on every 3DS on any firmware version.

For installation without a PC, user @TheCyberQuake has created a pack which will automatically install B9S and copy over essential starter homebrew from the flashcard's SD to the 3DS's. This will mainly be used for PC-less B9S installations. If you have a PC with you, use 3ds.guide. Read more here: https://gbatemp.net/threads/481141/

How does this work?

This works because of a flaw in the bootrom. Before the bootrom boots the NAND, it checks to see if Start+Select+X is held down, and if the shell is closed. If these requirements are met, it will boot an NDS cartridge from the bootrom. This give that cartridge bootrom access. You might be wondering how you'd hold down buttons while the shell is closed, and why you need a magnet. If you put a magnet in a specific spot on the 3DS, it will go into sleep mode. Using this, you can boot the NDS cartridge with the buttons held down while in sleep mode! Using a reflashable flashcard, you can boot B9SInstaller using the flashcard, and easily install it on your 3DS.
The 2DS doesn't need a magnet since a switch puts it to sleep instead of a magnet.

What does this mean?

  1. Any 3DS model on any firmware can be hacked with minimal effort
  2. You can unbrick any 3DS model from any type of brick.
    - Remember, you don't need a NAND backup for this. Just do a CTRTransfer.
    - This does not apply to MCU bricks.
  3. Even consoles with fried NAND, or even the NAND chip physically removed, can use this
This is incredibly impressive stuff, and will most likely be released soon! edit: now!

FAQ

Q: Can Nintendo patch this?
A: Nope! Not without a new hardware revision.

Q: My flashcard is blocked by my firmware! Can I still use this?
A: Yes! The flashcard blacklist is not enabled on the bootrom.

Q: Why can't this work with my flashcard?
A: The installation requires you to flash NTRBoot to the flashcard's nand. Most DS flashcards, such as the original R4, have a ROM, which is not flashable.

Q: Can I install NTRBoot on my flashcard without another 3DS system?
A: If you can run NDS roms on your 3DS with it, then yes. If it's blocked on your 3DS version, then you'll need another 3DS system to use it.

Q: Will my 3DS flashcard work?
A: No, only the NDSi flashcards listed above.

Q: Will any other flash cards work?
A: Only the ones listed in the OP. However keep in mind that flashcards such as the DSTT, Supercard DS2 and R4 SDHC Dualcore are planned to be supported in the future.

Q: I tried to do this with my cartridge and it didn't work?
A: It doesn't work with regular DS cards.

Q: Can I unbrick from a ____ brick?
A: Considering the card has access to the bootrom, yes! This can unbrick any brick (except MCU), unless you've taken a knife to the motherboard.

Q: Can I install B9S on the latest firmware with this?
A: Again, since the card has access to the bootrom, you can do this easily! Just plug in your flashcard, boot up using the magnet and button combination, and install.

Q: Does this work on the New Nintendo 2DS XL?
A: Yes!

:arrow: Release
:arrow: Guide
:arrow: Free NTRBoot Flashing
:arrow: Free B9S Installations

Here is SciresM's post about this

Please see SciresM's presentation on bootromhax.
 
Last edited by Deleted member 381889,

laharl22

Well-Known Member
Member
Joined
Dec 19, 2014
Messages
1,767
Trophies
0
Age
38
XP
615
Country
France
I need help for unbrick my o3ds i have use ntrboot now i have godmode9 but after make a ctrnand trsnsfert i have always the black screen arm11 error any idea please?
 

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,094
Country
Australia
I need help for unbrick my o3ds i have use ntrboot now i have godmode9 but after make a ctrnand trsnsfert i have always the black screen arm11 error any idea please?
When does the arm11 screen happen? During the CTR transfer or after? Try temporarily renaming your Nintendo 3DS folder in case it is the fault of corrupt theme data.
 

laharl22

Well-Known Member
Member
Joined
Dec 19, 2014
Messages
1,767
Trophies
0
Age
38
XP
615
Country
France
When does the arm11 screen happen? During the CTR transfer or after? Try temporarily renaming your Nintendo 3DS folder in case it is the fault of corrupt theme data.
The screen appear at Lima boot i have no 3ds folder this 3ds was bricked since 2014

--------------------- MERGED ---------------------------

The screen appear at Luma boot i have no 3ds folder this 3ds was bricked since 2014
 

RustInPeace

Samurai Cop
Member
Joined
Oct 13, 2014
Messages
5,942
Trophies
1
Age
31
XP
5,158
Country
United States
Randomly felt like putting it out there, but if someone in PA wants a free NTRBoot installation (meet-up, I don't feel like doing the mailing), I'm available for that. I had this thought today, a pure desire to install CFW on a 3DS, but at this point I need to buy one or do it for someone.
 
  • Like
Reactions: Majickhat55

TheCyberQuake

Certified Geek
Member
Joined
Dec 2, 2014
Messages
5,012
Trophies
1
Age
28
Location
Las Vegas, Nevada
XP
4,432
Country
United States
Randomly felt like putting it out there, but if someone in PA wants a free NTRBoot installation (meet-up, I don't feel like doing the mailing), I'm available for that. I had this thought today, a pure desire to install CFW on a 3DS, but at this point I need to buy one or do it for someone.
If you are ever bored you can uninstall b9s and reinstall with ntrboot. I've done it multiple times to test my ntrpack
 
  • Like
Reactions: RustInPeace

Technicmaster0

Well-Known Member
Member
Joined
Oct 22, 2011
Messages
4,407
Trophies
2
Website
www.flashkarten.tk
XP
3,501
Country
Gambia, The
  • Like
Reactions: RustInPeace

Quantumcat

Dead and alive
Member
Joined
Nov 23, 2014
Messages
15,144
Trophies
0
Location
Canberra, Australia
Website
boot9strap.com
XP
11,094
Country
Australia
Do you have a guide for unbrick a 3ds please?my ctrnand seem To do nothing on my 3ds
Get Decrypt9 from https://github.com/d0k3/Decrypt9/releases and put the firm file in luma/payloads

Put the CTR transfer files in a folder called files9

Boot into the chainloader menu by holding Start on boot and select Decrypt9

Go to sysNAND options then CTR transfer (I think). Choose auto.
 
  • Like
Reactions: laharl22

Adeka

Beta Tester
Member
Joined
Mar 19, 2013
Messages
4,168
Trophies
0
Age
30
XP
1,633
Country
United States
Bit disappointed to find out the new r4isdhc release doesn't work on any carts 2013 or under :(

was hoping to unbrick two of my 2012 (new on label) r4isdhc.com carts
 
Last edited by Adeka,

busmanl30

Well-Known Member
Member
Joined
May 4, 2017
Messages
249
Trophies
0
Age
43
XP
256
Country
United States

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
    realtimesave @ realtimesave: hi