NTRBoot Released!

It's here!
ntrboot_checklist_2.png

Info

@Normmatt has created a way to run B9S .firm files from bootrom via a DSi Flashcard and a magnet! This works on every 3DS on any firmware version.

For installation without a PC, user @TheCyberQuake has created a pack which will automatically install B9S and copy over essential starter homebrew from the flashcard's SD to the 3DS's. This will mainly be used for PC-less B9S installations. If you have a PC with you, use 3ds.guide. Read more here: https://gbatemp.net/threads/481141/

How does this work?

This works because of a flaw in the bootrom. Before the bootrom boots the NAND, it checks to see if Start+Select+X is held down, and if the shell is closed. If these requirements are met, it will boot an NDS cartridge from the bootrom. This give that cartridge bootrom access. You might be wondering how you'd hold down buttons while the shell is closed, and why you need a magnet. If you put a magnet in a specific spot on the 3DS, it will go into sleep mode. Using this, you can boot the NDS cartridge with the buttons held down while in sleep mode! Using a reflashable flashcard, you can boot B9SInstaller using the flashcard, and easily install it on your 3DS.
The 2DS doesn't need a magnet since a switch puts it to sleep instead of a magnet.

What does this mean?

  1. Any 3DS model on any firmware can be hacked with minimal effort
  2. You can unbrick any 3DS model from any type of brick.
    - Remember, you don't need a NAND backup for this. Just do a CTRTransfer.
    - This does not apply to MCU bricks.
  3. Even consoles with fried NAND, or even the NAND chip physically removed, can use this
This is incredibly impressive stuff, and will most likely be released soon! edit: now!

FAQ

Q: Can Nintendo patch this?
A: Nope! Not without a new hardware revision.

Q: My flashcard is blocked by my firmware! Can I still use this?
A: Yes! The flashcard blacklist is not enabled on the bootrom.

Q: Why can't this work with my flashcard?
A: The installation requires you to flash NTRBoot to the flashcard's nand. Most DS flashcards, such as the original R4, have a ROM, which is not flashable.

Q: Can I install NTRBoot on my flashcard without another 3DS system?
A: If you can run NDS roms on your 3DS with it, then yes. If it's blocked on your 3DS version, then you'll need another 3DS system to use it.

Q: Will my 3DS flashcard work?
A: No, only the NDSi flashcards listed above.

Q: Will any other flash cards work?
A: Only the ones listed in the OP. However keep in mind that flashcards such as the DSTT, Supercard DS2 and R4 SDHC Dualcore are planned to be supported in the future.

Q: I tried to do this with my cartridge and it didn't work?
A: It doesn't work with regular DS cards.

Q: Can I unbrick from a ____ brick?
A: Considering the card has access to the bootrom, yes! This can unbrick any brick (except MCU), unless you've taken a knife to the motherboard.

Q: Can I install B9S on the latest firmware with this?
A: Again, since the card has access to the bootrom, you can do this easily! Just plug in your flashcard, boot up using the magnet and button combination, and install.

Q: Does this work on the New Nintendo 2DS XL?
A: Yes!

:arrow: Release
:arrow: Guide
:arrow: Free NTRBoot Flashing
:arrow: Free B9S Installations

Here is SciresM's post about this

Please see SciresM's presentation on bootromhax.
 
Last edited by Deleted member 381889,

cyb0rg

Well-Known Member
Newcomer
Joined
Aug 29, 2014
Messages
79
Trophies
0
XP
1,714
Country
United States
Last edited by cyb0rg,

Snooli

Well-Known Member
Member
Joined
May 25, 2017
Messages
188
Trophies
0
Age
25
XP
151
Country
Anyone know what the problem could be?

"/ntrboot/boot9strap_ntr.firm not found"

Device: http://www.nds-card.com/ProShow.asp?ProID=149

Files are on the card in the proper place:

oJ3oezl.png

https://i.imgur.com/oJ3oezl.png

The card works fine normally. Starts a DS game no problem.

Everything goes fine up until:

Select “Inject Ntrboot"
Press (A) for retail unit ntrboot

"/ntrboot/boot9strap_ntr.firm not found"

https://3ds.guide/flashing-ntrboot-(3ds-multi-system)
Is that the flashcards SD card or 3DS'?
 
  • Like
Reactions: cyb0rg

Snooli

Well-Known Member
Member
Joined
May 25, 2017
Messages
188
Trophies
0
Age
25
XP
151
Country
Can any CFW besides Luma3DS work properly on a Ntrboot hacked 3DS? EXAMPLES: REINAND, Corbenik, Cosmo3DS

Also, does Anemone work with NH2 type exploits?
Yes, NTRboot is only an ARM9 entrypoint, usually used for B9S and Luma installation, but nothing's preventing you from installing whatever else.
Anemone has a .3dsx release, so I guess yes it should work with userland entrypoints...
Ninja'd
 

MrJason005

√2
Member
Joined
Nov 26, 2014
Messages
2,521
Trophies
0
Location
Κάπου
XP
1,609
Country
Greece
Can any CFW besides Luma3DS work properly on a Ntrboot hacked 3DS? EXAMPLES: REINAND, Corbenik, Cosmo3DS

Also, does Anemone work with NH2 type exploits?
To add to what @Redferne said, with B9S you can also load luma, downgrade to whatever firmware you want and run whatever CFW you want. Thanks to B9S you can even dump your OTP without downgrading to 2.1 and install A9LH
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    ZeroT21 @ ZeroT21: only ps5 updated to latest firmware can go on psn, jailbroken ones just don't use psn or they...