Hacking "No main boot entries found"

[Johnnyjames]

Hi there I'm wondering if someone can help me figure out this issue I'm having with hekate/atmosphere.

Ofw:9.0.0
Hekate: 5.1.1
atmosphere : 0.10.1

I followed nh switch guide exactly up to "launch custom firmware". When I inject hekate and use touchscreen to launch atmosphere I get a screen that says:
"no main boot entries found..."
"You can use the following entry to boot stock."
"Or use more configs button for more boot entries.

I've managed to get atmosphere to launch bu injecting fusee primary.

As a side note/other issue. I cannot launch the HBM in atmosphere using the r trigger on any games but only the gallery works.

Any ideas would be greatly appreciated as I've put hours searching the answer on my own and I'm only reaching out as a last resort.

Thank you

 

[JuhOwl]

Hello, I had the same problem when I update, you need to put the config files in

bootloader/ini/

If need you can have a sample in hekate GitHub

Github > res/hekate_ipl_template.ini

Or you can use the sdsetup site to download a package ready to go

 

[Johnnyjames]

Thanks. I ended up fixing this by multiple techniques... What was super important was the patches for atmosphere folder. It's a separate compilation download on github. Then after those it started working. If your having similar problem make sure you get a good kekate ipl file and also the patches enex or whatever. Good luck!

 

[JuhOwl]

Nice,
I forget about the patches,
I had that error too,

 

[hielclint]

Hey, I'm having this issue as well, could you walk me through it?

 

[sli4]

Hello, I had the same problem when I update, you need to put the config files in

bootloader/ini/

If need you can have a sample in hekate GitHub

Github > res/hekate_ipl_template.ini

Or you can use the sdsetup site to download a package ready to go

can you explain which section to use?
I'm pretty sure I use fusee-primary.bin and all of these say secondary and fss0?

 

[Draxzelex]

can you explain which section to use?
I'm pretty sure I use fusee-primary.bin and all of these say secondary and fss0?

Just use the CFW option.

 

[senshixSmoke]

Hello, I had the same problem when I update, you need to put the config files in

bootloader/ini/

If need you can have a sample in hekate GitHub

Github > res/hekate_ipl_template.ini

Or you can use the sdsetup site to download a package ready to go

i downloaded the one from sdsetup and im still getting the same issue, ive tried everything i can find and ive been here for like 4 hours trying to mod this hoe.

 

[Owdmn]

Hi there I'm wondering if someone can help me figure out this issue I'm having with hekate/atmosphere.

Ofw:9.0.0
Hekate: 5.1.1
atmosphere : 0.10.1

I followed nh switch guide exactly up to "launch custom firmware". When I inject hekate and use touchscreen to launch atmosphere I get a screen that says:
"no main boot entries found..."
"You can use the following entry to boot stock."
"Or use more configs button for more boot entries.

I've managed to get atmosphere to launch bu injecting fusee primary.

As a side note/other issue. I cannot launch the HBM in atmosphere using the r trigger on any games but only the gallery works.

Any ideas would be greatly appreciated as I've put hours searching the answer on my own and I'm only reaching out as a last resort.

Thank you

I just replaced the text inside the ini file to

[config]
autoboot=0
autoboot_list=0 autohosoff=1 autonogc-1
backlight=100
bootwait=3 updater2p=0
[CFW (sysMMC)]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin icon-bootloader/res/icon_payload.bmp
[CFW (emuMMC)]
emummcforce=1
fss0=atmosphere/fusee-secondary.bin icon-bootloader/res/icon_payload.bmp
[Stock]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
icon-bootloader/res/icon_switch.bmp
stock=1
[Fusee]
icon-bootloader/res/icon_payload.bmp
payload=bootloader/payloads/fusee-primary.bin

and put fusee in the payload folder, if its just called fusee.bin change it to fusee-primary.bin, it works for me

 

[kidkat210]

I just replaced the text inside the ini file to

[config]
autoboot=0
autoboot_list=0 autohosoff=1 autonogc-1
backlight=100
bootwait=3 updater2p=0
[CFW (sysMMC)]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin icon-bootloader/res/icon_payload.bmp
[CFW (emuMMC)]
emummcforce=1
fss0=atmosphere/fusee-secondary.bin icon-bootloader/res/icon_payload.bmp
[Stock]
emummc_force_disable=1
fss0=atmosphere/fusee-secondary.bin
icon-bootloader/res/icon_switch.bmp
stock=1
[Fusee]
icon-bootloader/res/icon_payload.bmp
payload=bootloader/payloads/fusee-primary.bin

and put fusee in the payload folder, if its just called fusee.bin change it to fusee-primary.bin, it works for me

That's an old hekate_ipl.ini file. None of those options will work besides the one name fusee as long as you rename fusee.bin to fusee-primary.bin every time you update atmosphere. Fusee-primary.bin and fusee-secondary.bin haven't been used since before atmosphere 1.x

Also, no need to necro a post from 3 years ago