Homebrew New here but old dog

Batoesie

New Member
OP
Newbie
Joined
May 13, 2023
Messages
4
Trophies
0
Age
44
XP
20
Country
United States
I been doing homebrew since the gc, not a pirate just beenn living that nintendo life since 5. So i got all original hardware from the begining. I signed up here bc after homebrewing my 3dsxl with superskaterhaks, and both my kids with seedminer it was time to move on to my wifes. Only prob is no L or R button. I took it apart thinking its dirty, a little alcohol and all will be well. Nope, Zl and Zr are still on the board but L and R are not present on the board at all. So for now thats the only one in the house w/o cfw. If i knew how to post pics i would. I dont even think i can bc imma a noob here. It let me post pics so now is there any way to install cfw with these buttons missing like not on the board at all. I pulled apart an old broke dsi bc the L&R are independent from the board, the prob is theres no jack on the n2dsxl for those ribons to plug into.
 

Attachments

  • C6973A23-2999-420C-94F4-CED2A740603A.jpeg
    C6973A23-2999-420C-94F4-CED2A740603A.jpeg
    1.2 MB · Views: 25
  • D28EFF30-A1AF-465D-8594-8B4217F192EF.jpeg
    D28EFF30-A1AF-465D-8594-8B4217F192EF.jpeg
    1.2 MB · Views: 26
  • Like
Reactions: CoolMe

CoolMe

"Who am i, what am i?"
Member
Joined
Apr 16, 2019
Messages
7,522
Trophies
1
Age
29
XP
33,468
Country
United States
Hello @Batoesie and welcome to GBATemp! :toot: :grog:
As for your problem, if it's missing the L/R buttons (or if they're not working?) order a replacement online and replace them.
 

Batoesie

New Member
OP
Newbie
Joined
May 13, 2023
Messages
4
Trophies
0
Age
44
XP
20
Country
United States
Hello @Batoesie and welcome to GBATemp! :toot: :grog:
As for your problem, if it's missing the L/R buttons (or if they're not working?) order a replacement online and replace them.

Dont know how to, nor do i have the gear to micro solder. There isnt a homebrew techniq that dosnt involve L&R? Once i homebrew and get cfw i can remap the ZL&ZR to L&R. Its a real catch 22. Its like this unit shipped without those 2 buttons soldered onto the motherboard.
 

zxr750j

Longtime member
Member
Joined
Sep 29, 2003
Messages
938
Trophies
2
Location
Utrecht
XP
2,938
Country
Netherlands
It looks like a 2ds xl?
Are the pads still there? You could temporarily solder some tiny wires to the pads and connect the wires when needed.
 

Kittfox63

Member
Newcomer
Joined
Nov 16, 2022
Messages
17
Trophies
0
Age
36
XP
347
Country
United States
I been doing homebrew since the gc, not a pirate just beenn living that nintendo life since 5. So i got all original hardware from the begining. I signed up here bc after homebrewing my 3dsxl with superskaterhaks, and both my kids with seedminer it was time to move on to my wifes. Only prob is no L or R button. I took it apart thinking its dirty, a little alcohol and all will be well. Nope, Zl and Zr are still on the board but L and R are not present on the board at all. So for now thats the only one in the house w/o cfw. If i knew how to post pics i would. I dont even think i can bc imma a noob here. It let me post pics so now is there any way to install cfw with these buttons missing like not on the board at all. I pulled apart an old broke dsi bc the L&R are independent from the board, the prob is theres no jack on the n2dsxl for those ribons to plug into.
Good luck finding out how to fix this, and welcome to GBAtemp!
 

Batoesie

New Member
OP
Newbie
Joined
May 13, 2023
Messages
4
Trophies
0
Age
44
XP
20
Country
United States
It looks like a 2ds xl?
Are the pads still there? You could temporarily solder some tiny wires to the pads and connect the wires when needed.

Dont have the skills to micro solder nor the equipment. THx for the reply. I believe it shipped like this. Bc the buttons didnt fall out when i cracked it open and theres no tin where the buttons are supposed to be. It never got brought to my attention bc the lz,lr buttons worked.
Post automatically merged:

Welcome new dog, I am The Catboy, local mess and arsonist

NIcely met, nintendo life since 7 now almost 45
 

miyamorfus

Member
Newcomer
Joined
Dec 5, 2022
Messages
11
Trophies
0
Age
27
XP
14
Country
United Kingdom
Unfortunately, it is unlikely that you will be able to install custom firmware on your wife's Nintendo 2DS XL if the L and R buttons are not present on the board and there is no jack for the ribbons to plug into.
Custom firmware installation typically involves using the L and R buttons to enter a recovery mode, which is necessary to perform the installation. Without these buttons, it may not be possible to enter the recovery mode and complete the installation process.
 

Batoesie

New Member
OP
Newbie
Joined
May 13, 2023
Messages
4
Trophies
0
Age
44
XP
20
Country
United States
Unfortunately, it is unlikely that you will be able to install custom firmware on your wife's Nintendo 2DS XL if the L and R buttons are not present on the board and there is no jack for the ribbons to plug into.
Custom firmware installation typically involves using the L and R buttons to enter a recovery mode, which is necessary to perform the installation. Without these buttons, it may not be possible to enter the recovery mode and complete the installation process.

So no way start with one technique and finish with another.
 

TheR1000

Member
Newcomer
Joined
Mar 26, 2023
Messages
7
Trophies
0
Age
23
XP
34
Country
United States
I been doing homebrew since the gc, not a pirate just beenn living that nintendo life since 5. So i got all original hardware from the begining. I signed up here bc after homebrewing my 3dsxl with superskaterhaks, and both my kids with seedminer it was time to move on to my wifes. Only prob is no L or R button. I took it apart thinking its dirty, a little alcohol and all will be well. Nope, Zl and Zr are still on the board but L and R are not present on the board at all. So for now thats the only one in the house w/o cfw. If i knew how to post pics i would. I dont even think i can bc imma a noob here. It let me post pics so now is there any way to install cfw with these buttons missing like not on the board at all. I pulled apart an old broke dsi bc the L&R are independent from the board, the prob is theres no jack on the n2dsxl for those ribons to plug into.
If your using 3ds.guide, you can download something to use x&y.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
  • Xdqwerty @ Xdqwerty:
    good night
  • BakerMan @ BakerMan:
    as to you
  • K3Nv2 @ K3Nv2:
    How do you know if the night will be good when you're asleep
  • BakerMan @ BakerMan:
    because i didn't say i was asleep
  • BakerMan @ BakerMan:
    i said i was sleeping...
  • BakerMan @ BakerMan:
    sleeping with uremum
  • K3Nv2 @ K3Nv2:
    Even my mum slept on that uremum
  • TwoSpikedHands @ TwoSpikedHands:
    yall im torn... ive been hacking away at tales of phantasia GBA (the USA version) and have so many documents of reverse engineering i've done
  • TwoSpikedHands @ TwoSpikedHands:
    I just found out that the EU version is better in literally every way, better sound quality, better lighting, and there's even a patch someone made to make the text look nicer
  • TwoSpikedHands @ TwoSpikedHands:
    Do I restart now using what i've learned on the EU version since it's a better overall experience? or do I continue with the US version since that is what ive been using, and if someone decides to play my hack, it would most likely be that version?
  • Sicklyboy @ Sicklyboy:
    @TwoSpikedHands, I'll preface this with the fact that I know nothing about the game, but, I think it depends on what your goals are. Are you trying to make a definitive version of the game? You may want to refocus your efforts on the EU version then. Or, are you trying to make a better US version? In which case, the only way to make a better US version is to keep on plugging away at that one ;)
  • Sicklyboy @ Sicklyboy:
    I'm not familiar with the technicalities of the differences between the two versions, but I'm wondering if at least some of those differences are things that you could port over to the US version in your patch without having to include copyrighted assets from the EU version
  • TwoSpikedHands @ TwoSpikedHands:
    @Sicklyboy I am wanting to fully change the game and bend it to my will lol. I would like to eventually have the ability to add more characters, enemies, even have a completely different story if i wanted. I already have the ability to change the tilemaps in the US version, so I can basically make my own map and warp to it in game - so I'm pretty far into it!
  • TwoSpikedHands @ TwoSpikedHands:
    I really would like to make a hack that I would enjoy playing, and maybe other people would too. swapping to the EU version would also mean my US friends could not legally play it
  • TwoSpikedHands @ TwoSpikedHands:
    I am definitely considering porting over some of the EU features without using the actual ROM itself, tbh that would probably be the best way to go about it... but i'm sad that the voice acting is so.... not good on the US version. May not be a way around that though
  • TwoSpikedHands @ TwoSpikedHands:
    I appreciate the insight!
  • The Real Jdbye @ The Real Jdbye:
    @TwoSpikedHands just switch, all the knowledge you learned still applies and most of the code and assets should be the same anyway
  • The Real Jdbye @ The Real Jdbye:
    and realistically they wouldn't

    be able to play it legally anyway since they need a ROM and they probably don't have the means to dump it themselves
  • The Real Jdbye @ The Real Jdbye:
    why the shit does the shitbox randomly insert newlines in my messages
  • Veho @ Veho:
    It does that when I edit a post.
  • Veho @ Veho:
    It inserts a newline in a random spot.
  • The Real Jdbye @ The Real Jdbye:
    never had that i don't think
    The Real Jdbye @ The Real Jdbye: never had that i don't think