Homebrew MoonShell 2.10childzwai beta

[bellababy]

R4

 

[WiiUBricker]

R4
Here are instructions for R4 users: http://www.ds-xtra.com/MoonShell2

QUOTEHow to install Moonshell2 on R4

Method for start with R4.

* 'Moonshl2.nds' is started by the file list. It is a left button.
* When 'moonshl2.nds' is renamed into' DEFAULT.NDS ', MoonShell2 is always started.
* When 'moonshl2.nds' is renamed into' _DS_MSHL.nds', it starts from the button at the centre. Please note that the filename is case-sensitive; .NDS will not work.

To enable soft reset with R4

* copy the soft reset file from moonshell 1.xx.
* paste it to the moonshl2\resetmse folder and rename it as 'r4tf.nds'.

 

[twiztidsinz]

Would someone be willing to give me instruction on how to get this to work on a new card? I can't seem to get it to work.1). Copy files to the root (base directory) of your card
2). Run moonshl2.nds

R4
Here are instructions for R4 users: http://www.ds-xtra.com/MoonShell2

QUOTE

How to install Moonshell2 on R4

Method for start with R4.

* 'Moonshl2.nds' is started by the file list. It is a left button.
* When 'moonshl2.nds' is renamed into' DEFAULT.NDS ', MoonShell2 is always started.
* When 'moonshl2.nds' is renamed into' _DS_MSHL.nds', it starts from the button at the centre. Please note that the filename is case-sensitive; .NDS will not work.

To enable soft reset with R4

* copy the soft reset file from moonshell 1.xx.
* paste it to the moonshl2\resetmse folder and rename it as 'r4tf.nds'.

Those instructions are for original R4 (and it's clones) software.
Renaming it to DEFAULT.NDS and _DS_MSHL.nds won't work with Wood or a card that doesn't use the original R4's menu/a copy of the R4's menu (and even won't work on some fakes that do use a copy of the menu since they locked the Moonshell to the menu).

 

[bellababy]

This is the exact error I keep getting. Couldn't find_DS_MENU.DAT

 

[jurassicplayer]

1). Copy files to the root (base directory) of your card
2). Run moonshl2.nds

Only thing I can add, "copy files" is referring to the moonshl2 folder and for R4 and some other flashcarts, it may be required to use the alternate moonshell2 loader (usually I would refer to Taiju's...but I can't really do that anymore) because those said flashcarts sometimes do not play the audio of music and videos with the regular loader.

-edit-
If you are getting an error like that, you need to just place a _DS_Menu.dat into the root of your microSD (should be included in WoodR4).

 

[bellababy]

Can you please include a link to the file you downloaded for moonshell?

Posts merged

How do you place that?

 

[jurassicplayer]

Link to the moonshell2 download?
Moonshell2 is available here:
http://home.att.ne.jp/blue/moonlight/

I recommend using the Child Zwai version.

-edit-
Place a _ds_menu.dat as in copy and paste it in the root of the microSD.

 

[bellababy]

Ok let's see if I can get this. I'm really not dumb lol. I just haven't done it in a long time and I can't even remember which version I used on the original card.

 

[bellababy]

Ok so using the link you gave me for it, I downloaded it and did the set up and this is exactly what shows up on the cards main directory:

DUSTBOX(Folder)
moonshl2(folder)
moonshl2_backup20101206-210522(folder)
moonshl2.nds
moonshl2_altloader_dkpr27.nds
moonshl2_directboot.nds

Where do I get the _ds_menu.dat?

 

[jurassicplayer]

lol the _ds_menu.dat was supposed to be from here:
http://gbatemp.net/t268348-wood-firmwares-v1-19

 

[Mbmax]

Moonlight released an update to the child zwai version : http://twitter.com/#...408683015766018

I just uploaded it to filetrip : http://filetrip.net/...ate-f28755.html

Translated Readme.txt :

MoonShell Ver 2.10 for child zwai update file.

How to update :
Overwrite moonshl2.nds and moonshl2 folder.
If you use moonshell2 as primary firmware, use files in DLDIPAtchedFiles.

Warning ! :
Don't overwrite to other moonshell2 version than 2.10childzwai; otherwise you will see strange behavior.

How to check the version :
Push the START button while in the file list, if you can read “MoonShell Ver 2.10 for child zwai May 4 2", it's fully updated.

What's new:
Bug fixed : the DPG file hangs near the end during playback.
Bug fixed : the implementation of the touch panel combination command (can not seek in the long press).
Added: DPG File now can be played on bottom screen. Please refer to moonshl2_DPGOption.ini.

Original Readme.txt :

MoonShell Ver 2.10 for child zwai 用のアップデートファイルです。

・アップデートの仕方
moonshl2.ndsと、moonshl2フォルダを上書きコピーしてください。
標準のファームウェアを経由せずに直接起動している場合は、DLDIPatchedFilesフォルダ内のファイルをうまいことなんとかしてください。

・注意！
child zwai 以外のバージョンに上書きするとピンチです。
SDが壊れたりファームが起動しなくなったりはしませんが、MS2の挙動がおかしくなるでしょう。
そのときは、child zwai のインストールからやり直して下さい。

・バージョン確認の仕方
ファイルリストでSTARTボタンを押して、画面上に「MoonShell Ver 2.10 for child zwai May 4 2」と出ていればアップデート完了です。

・アップデート内容
2012/05/04
DPGファイル再生中に、終端付近で異常停止するバグを修正しました。
タッチパネルコンビネーションコマンドの実装バグ（長押しでシークできない）を修正しました。
DPGファイルを下画面で再生するオプションをmoonshl2.iniに追加しました。moonshl2_DPGOption.iniを参照して下さい。

Thanks to jurassicplayer for the heads up.

 

[TheRedfox]

Wow, this is still being developed?!
It's fascinating how long this project is under developement!

 

[avenir]

just to notice; link launcer is still usable.

 

[ComeTurismO]

holy, im surprised

 

[rurudtsafg]

Can somebody please help me figure out how to set up the dpg on bottom screen thingy????

 

[avenir]

add to moonshl2.ini

[DPGPlugin]
; 0 = Video to top screen, Controller to bottom screen.
; 1 = Video to bottom screen, Controller to top screen.
SwapScreen=1

 

[rurudtsafg]

add to moonshl2.ini

[DPGPlugin]
; 0 = Video to top screen, Controller to bottom screen.
; 1 = Video to bottom screen, Controller to top screen.
SwapScreen=1

but then wat it doesnt do anything after that......

 

[wimu]

A quick question is this patch also usable for MoonShell 2.10 Stable release or just MoonShell 2.10childzwai?
cuz i cant get to install the the childzwai version with the installer, always getting the error "....\moonshel2\extlink\textedit\??????????.text" no matter how many times i downlad the installer.

 

[Mbmax]

A quick question is this patch also usable for MoonShell 2.10 Stable release or just MoonShell 2.10childzwai?
cuz i cant get to install the the childzwai version with the installer, always getting the error "....\moonshel2\extlink\textedit\??????????.text" no matter how many times i downlad the installer.

Check this filetrip link : http://filetrip.net/...ers-f12849.html
And no, you can't use the 2.10 stable with this update as said in the readme.txt.

 

[wimu]

Thanks for ur quick reply, but even when i exchange the original for the one u link stil getting the same error. Another possibilitie to make the installer work correctly? The file wich makes the installation fail is this 予測変換辞書の記号リスト.txt and this is the route D:\NDS\201008312320_moonshell210childzwai\moonshl2\extlink\TextEdit, can i rename it to make it work? if so ow should i rename it? Maybe i need to intall the asian font to make the installer work.