Manual setup

Discussion in 'NDS - Nintendo Wi-Fi Connection' started by Reaper, Dec 26, 2008.

Dec 26, 2008

Manual setup by Reaper at 6:58 PM (941 Views / 0 Likes) 4 replies

  1. Reaper
    OP

    Member Reaper Tͩ͒ͥ̈́ͧ̓͑̆̂

    Joined:
    Oct 14, 2008
    Messages:
    1,258
    Country:
    United States
    I have a 2wire router, which I configured to WEP Open mode, but it won't connect, even though my DS detects it and my computer connects to it just fine. I tried manual setup and got all of the DNS and IPs correct but it won't connect. Does this mean the router is simply not compatible or is the firewall blocking it(which I tried to fix, but was met with failure)?

    But I also have another router that works but I need an ethernet from a computer to be plugged in to a slot and have another ethernet going to the 2wire, which is a gateway. But then that won't work too well because the computer has only 1 ethernet slot, which it uses for the internet.
     
  2. kobykaan

    Member kobykaan GBAtemp Addict

    Joined:
    Aug 27, 2007
    Messages:
    2,994
    Country:
    United Kingdom
    follow the guides at nintendo here [​IMG]
     
  3. Reaper
    OP

    Member Reaper Tͩ͒ͥ̈́ͧ̓͑̆̂

    Joined:
    Oct 14, 2008
    Messages:
    1,258
    Country:
    United States
    I couldn't find any helpful things on nintendo's help site. I think the problem is that my second router has a static IP. I need to assign it a new one to allow applications to go through it. But how?

    Is there such thing as an ethernet adapter that lets 2 cables connect to one computer?
     
  4. fluid

    Newcomer fluid Member

    Joined:
    Nov 7, 2008
    Messages:
    17
    Country:
    Canada

    My router is also a 2wire router, and I'm having the exact same problem. Any setup help would be greatly appreciated !
     
  5. fluid

    Newcomer fluid Member

    Joined:
    Nov 7, 2008
    Messages:
    17
    Country:
    Canada
    ok, just found this on the 2Wire website:

    Select No under Auto-obtain IP Adress.

    For 2Wire gateways running software version 3.7.x or higher, use the following IP information:

    IP address 192.168.1.15
    Subnet Mask 255.255.255.0
    Default Gateway 192.168.1.254
    Primary DNS 206.13.30.12
    Secondary DNS 192.168.1.254

    For 2Wire gateways running software version 3.1 to 3.5.x, use the following IP information:

    IP address 172.16.1.15
    Subnet Mask 255.255.255.0
    Default Gateway 172.16.0.1
    Primary DNS 206.13.30.12
    Secondary DNS 172.16.0.1
     

Share This Page