Hacking Loadstructor

[cedriccheah]

try redoin the alt-dol trick in a loader then try your channel, i had a problem when i updated to 4.1 from 4.0 i had to redo the alt-dol, i think once you update it wipes the setting telling the wii you have already watched the motion+ vid making it black screen on every load til you do it, once i done it it loaded no probs

I just tried and hung at black screen too.

One thing I notice that I think is abnormal.
other channel made by Loadstuctor will move to a black screen with loading information after I press Start.
But for WSR channel I made, once I press start, it move to a black screen and hung forever there.

 

[TeenTin]

Somebody please test new cLoader with IOS222 or IOS223. I'm not sure that it will work

Tested IOS223. Not working. It just keep searching for the HD.

However, working well with 1.5.1.

 

[jakejm79]

Cedric,

You can try the online firmware upgrader, it first downloads everything then checks it, then installs it, so if your connection dies half way through it wont do any damage, it just wont install.

 

[pepxl]

try redoin the alt-dol trick in a loader then try your channel, i had a problem when i updated to 4.1 from 4.0 i had to redo the alt-dol, i think once you update it wipes the setting telling the wii you have already watched the motion+ vid making it black screen on every load til you do it, once i done it it loaded no probs

I just tried and hung at black screen too.

One thing I notice that I think is abnormal.
other channel made by Loadstuctor will move to a black screen with loading information after I press Start.
But for WSR channel I made, once I press start, it move to a black screen and hung forever there.

the text on the screen is telling you what its doing aka debug and is only shown when you select verbose in loadstructor

WSR works perfect for me ive made several channel with mix setting and all worked

 

[cedriccheah]

ok, let me try to upgrade my wii to 4.1U then

Thank for all the helps...hope this times it's works.

 

[ps3nano]

Thanks new version

On Monster hunter 3 cloader 1.5c

only 249 selected works till Opening Movie. then beep freeze.

Another 222 and 223 lost WFBL.


old version 1.5b

222 not ocaria can paly games. but USB Memory is lost.

I thought If New version 223 and 223 find WFBL, monster hunter 3 worls with ocaria.

old versin stop Ocaria cheat code

ゲームID：RMHJ08

必須
4A000000 90000000

スタミナ最大維持
120FCEB8 00010384

酸素減らない
0434613C 60000000

ダメージ受けない
04345C94 7C030378

ダッシュ速度UP
048A709C 40200000

斬れ味落ちない
04348390 7C030378

ボウガン弾数減らない
0435A1F0 7C802378
0435A240 60000000

攻撃力 n倍
0433E1CC 60000000
0433E1D0 1C0000xx
xx=
02:2倍
03:3倍
04:4倍
05:5倍
10:16倍

防御力 n倍
C233E64C 00000002
1C6300xx B07F03BA
60000000 00000000
xx=
02:2倍
03:3倍
04:4倍
05:5倍
10:16倍

無限剥ぎ取り＆採取
042091F8 38030000
04209204 38630000

ピッケル、虫あみ、笛壊れない
04315FE0 4800009C

 

[sk0ld]

1.5c & 222/223 fails for me too, where 1.5b has worked very well.
I also wanted to mention, cLoader 1.5b set to 222/223 loading from an SD with multiple partitions (arranged with gparted, one of them wbfs of course, initialized with kwiirk's original linux wbfs) doesn't boot. It'll work with 249, but takes some time to find the partition.. much longer than waninkoko's 1.5, which is instantly after selecting SD. If I try to boot the same SD with WiiCrazy's 1.5 loader mod, it code dumps.

 

[Cluster]

Ok, I'll rollback it...

 

[cedriccheah]

I just did an upgrade to 4.1U now.
Tried to load WSR with and without alt-dol but both hung at black screen...
seriously no idea what to do...

I have uploaded my signCheck result which showing all IOS ver...is that possible one of my IOS not updated?
http://sharebee.com/0d75f01c

 

[pepxl]

forget the channel for now and use a disk or usb loader to do the alt-dol(make sure your using the correct .dol for your region if your getting it from else where) with the 002 fix( might be anti002) on aswel to view the motion+ video to the end, when the videos are done playing reset the wii(it will reset it self on some wiis).

loader the usb or disk loader again this time turn off alt-dol but keep 002 fix( might be anti002) on.

the easiest loader to use is usbgx as it has a auto find alt-dol which searches the iso on the WBFS partition

now WRS shold loader with all loaders when using the 002 fix even even the loadstructor channel, if is still doesnt work you are doin something wrong, its a faulty copy of WSR or you are missing the needed ios(not likely as you are on 4.1)

when you get it loading in a loader try the created channel, it should now work with these settings----

P.S..

you will always get a black screen when loading if you dont do the alt-dol trick first, you must watch the motion+ video before you can play WSR

 

[cedriccheah]

forget the channel for now and use a disk or usb loader to do the alt-dol(make sure your using the correct .dol for your region if your getting it from else where) with the 002 fix( might be anti002) on aswel to view the motion+ video to the end, when the videos are done playing reset the wii(it will reset it self on some wiis).

loader the usb or disk loader again this time turn off alt-dol but keep 002 fix( might be anti002) on.

the easiest loader to use is usbgx as it has a auto find alt-dol which searches the iso on the WBFS partition

now WRS shold loader with all loaders when using the 002 fix even even the loadstructor channel, if is still doesnt work you are doin something wrong, its a faulty copy of WSR or you are missing the needed ios(not likely as you are on 4.1)

when you get it loading in a loader try the created channel, it should now work with these settings----


P.S..

you will always get a black screen when loading if you dont do the alt-dol trick first, you must watch the motion+ video before you can play WSR

I able to load WSR with Neogamma and USBLoader GX without any problem now.
But I still can't load with Loadstructor channel that i made for WSR which I tried same settings as urs....it still hung at black screen.
Weird...lol

 

[pepxl]

mmmm have u tried using the different loader availible or just cloader

 

[cedriccheah]

mmmm have u tried using the different loader availible or just cloader

just tried cloader because I able to run it when it was in 3.2U.
not sure if other loader works, let me try....

 

[thatguyyouknow]

Now that Gecko OS 1.9.2 source has been released, will this get updated with 1.9.2 functionality like increased line limit and gameconfig.txt? I'd love to have a dedicated Brawl+ channel.

 

[Bladexdsl]

btw whats verbose output do?

 

[Bawal]

Cluster & wiiNinja -

just wanted to say thanks for your great application(s).
Just a short success story.
Created my last Channels fine with v1.4/v1.3 until last week
when I got WiiSports2 (aka WSR) as a gift.
Orig DVD wanted SystemUpdate, so I tried first with BackupLoader.
Still 002 error. Then I tried installing IOS53 + IOS55 by hand (I heared
002 error may related to missing IOS55). Still 002 error.
Finally I used your v1.7/1.5c to create a channel with 002 fix.
Let it run once with the alt.DOL to see the boring video and after that
the channel with just 002 fix. Works brilliant. Even on my Wii 3.4E with
cIOS36 Rev9. Yes...it runs!

Thanks...good work!

btw whats verbose output do?

...look at Clusters post #394 at page 27. Some initializing/debug/loader messages some like and some don't.

 

[lostdwarf]

excellent app, has made me very happy thank you very much, loadstructor 1.7 is so easy to use and channels work great on my wii

thanks!

only one problem though... i cant make a channel for "the conduit", says something about opening.bnr not found and fails... any way around this?

 

[jakejm79]

excellent app, has made me very happy thank you very much, loadstructor 1.7 is so easy to use and channels work great on my wii

thanks!

only one problem though... i cant make a channel for "the conduit", says something about opening.bnr not found and fails... any way around this?

Is it the NTSC-U version, cos I made mine fine and it works.

 

[lostdwarf]

ok it worked today!????

have no idea why it wouldnt work yesterday, tried 6 or so times.

today is obviously a better day.

btw its pal i think.. id RCJE8P


ok another update.... it works with EVERYTHING 100%

this app is great!

 

[pepxl]

ok it worked today!????

have no idea why it wouldnt work yesterday, tried 6 or so times.

today is obviously a better day.

btw its pal i think.. id RCJE8P


ok another update.... it works with EVERYTHING 100%

this app is great!

no thats NTSC-U

RCJE8P

E= NTSC-U
J= NTSC-J
P= PAL