Hardware Is soundhax still possible on a New 3DS XL on 9.2.0 U?

[TheVideoEffect]

Hello! I don't know if this is in the right thread, so ya.
Anyways, I had recently gottn my hands on a refurbished New 3DS XL (Pretty good condition )
And I installed B9S and Luma 3DS all up-to-date.
I then wanted to try to add a oothax save file to my OOT copy.
I then relized, i was running SIGHAX and not *hax.
So i uninstalled Luma and B9S (I am going to re-install it later.) But, before I did that i downgraded to 9.2.0 (Using safesys updater)
Now when I try soundhax, it says 'Cant open file'
Any help? (I did put the right files, i cheked)

 

[lone_wolf323]

Hello! I don't know if this is in the right thread, so ya.
Anyways, I had recently gottn my hands on a refurbished New 3DS XL (Pretty good condition )
And I installed B9S and Luma 3DS all up-to-date.
I then wanted to try to add a oothax save file to my OOT copy.
I then relized, i was running SIGHAX and not *hax.
So i uninstalled Luma and B9S (I am going to re-install it later.) But, before I did that i downgraded to 9.2.0 (Using safesys updater)
Now when I try soundhax, it says 'Cant open file'
Any help? (I did put the right files, i cheked)

The first question here is. Why. Why did you bother to remove cfw? the *hax entrypoints are really not needed once ya had the cfw.

 

[Kaiwaters]

im also curious about this i also have a n3ds on 9.2 i have cfw installed on my 32gb card but im upgrading to a 128 and i want to do a fresh install does the sound hax still work as an entry point?

 

[lone_wolf323]

Hello! I don't know if this is in the right thread, so ya.
Anyways, I had recently gottn my hands on a refurbished New 3DS XL (Pretty good condition )
And I installed B9S and Luma 3DS all up-to-date.
I then wanted to try to add a oothax save file to my OOT copy.
I then relized, i was running SIGHAX and not *hax.
So i uninstalled Luma and B9S (I am going to re-install it later.) But, before I did that i downgraded to 9.2.0 (Using safesys updater)
Now when I try soundhax, it says 'Cant open file'
Any help? (I did put the right files, i cheked)

When you did this. Do you remember what exact files were used in the downgrade. I am guessing what you did was downgraded the main firmware so its 9.2.0. But likely the downgrader did not include the side apps such as 3ds sound. So its still at 11.9 which would remain on a non usable one for soundhax. If you can verify everyfile downloaded to check if it did happen.

im also curious about this i also have a n3ds on 9.2 i have cfw installed on my 32gb card but im upgrading to a 128 and i want to do a fresh install does the sound hax still work as an entry point?

unless you downgraded and there was no cart updates you should be fine.

 

[Kaiwaters]

When you did this. Do you remember what exact files were used in the downgrade. I am guessing what you did was downgraded the main firmware so its 9.2.0. But likely the downgrader did not include the side apps such as 3ds sound. So its still at 11.9 which would remain on a non usable one for soundhax. If you can verify everyfile downloaded to check if it did happen.

unless you downgraded and there was no cart updates you should be fine.

i should be fine i downgrade from 10 something a long time ago so if they patched soundhax in 11 something i should be good

 

[TheVideoEffect]

When you did this. Do you remember what exact files were used in the downgrade. I am guessing what you did was downgraded the main firmware so its 9.2.0. But likely the downgrader did not include the side apps such as 3ds sound. So its still at 11.9 which would remain on a non usable one for soundhax. If you can verify everyfile downloaded to check if it did happen.

unless you downgraded and there was no cart updates you should be fine.

Er, you are probably right. Do you know where there is a CIA pack with the sound?

--------------------- MERGED ---------------------------

The first question here is. Why. Why did you bother to remove cfw? the *hax entrypoints are really not needed once ya had the cfw.

IDK. Just for safety. (I know boot9strap is inpatchable) and for other 3DS
-snip- is where I got the CIAs
Ooops sorry for linking lol

 

[TheVideoEffect]

But anyways, I looked at a bunch of guides, and I have found none with the support of system apps downgrade with it.

 

[Hayato213]

But anyways, I looked at a bunch of guides, and I have found none with the support of system apps downgrade with it.

Just use soundhax to set up CFW again, 9.2.0 was a rare firmware several years ago, not anymore, you can get CFW on any firmware now a day. The guide below is enough to take care of you.
https://3ds.hacks.guide/

 

[lone_wolf323]

Just use soundhax to set up CFW again, 9.2.0 was a rare firmware several years ago, not anymore, you can get CFW on any firmware now a day. The guide below is enough to take care of you.
https://3ds.hacks.guide/

Is that still possible when OP already updated everything to 11.9 and downgraded to 9.2? Would the sound app of been affected or is it still at 11.9 while the main system is 9.2 now?

 

[Hayato213]

Is that still possible when OP already updated everything to 11.9 and downgraded to 9.2? Would the sound app of been affected or is it still at 11.9 while the main system is 9.2 now?

Well he can always use other methods, I thought he was on still on 9.2.0-20U, it is different now a day compare to reinand cfw days, no needs to waste time downgrading, it is not like someone will pay crazy amount for 9.2.0-20U devices nowadays.

 

[TheVideoEffect]

Well he can always use other methods, I thought he was on still on 9.2.0-20U, it is different now a day compare to reinand cfw days, no needs to waste time downgrading, it is not like someone will pay crazy amount for 9.2.0-20U devices nowadays.

Yes, Yes I know. But I do want to have the file on my OoT card just in case for another 3ds.

 

[Hayato213]

Yes, Yes I know. But I do want to have the file on my OoT card just in case for another 3ds.

Since you are on 11.9, go with either seedminer or ntrboothax, don't waste time downgrading, downgrading back in the days does have the risk of brick, I got lucky downgraded a few units for a friend.

 

[TheVideoEffect]

Since you are on 11.9, go with either seedminer or ntrboothax, don't waste time downgrading, downgrading back in the days does have the risk of brick, I got lucky downgraded a few units for a friend.

So is there a way to get OoTHax on a card with SIGhax?

 

[Hayato213]

So is there a way to get OoTHax on a card with SIGhax?

Doesn't work on 11.9, userland homebrew entry is different than CFW setup entry point, base on your current firmware you can do either seedminer, fredminer, ntrboothax, and the hardest is hardmod, ntrboothax is my preference personally.

 

[TheVideoEffect]

Doesn't work on 11.9, userland homebrew entry is different than CFW setup entry point, base on your current firmware you can do either seedminer, fredminer, ntrboothax, and the hardest is hardmod, ntrboothax is my preference personally.

Ok then. I have one issue, though. I installed homebrew with ntrboot for temporary, but now it wont install cia files?

 

[Hayato213]

Ok then. I have one issue, though. I installed homebrew with ntrboot for temporary, but now it wont install cia files?

But you have B9S installed?

 

[TheVideoEffect]

But you have B9S installed?

Yea. FBI wont install

 

[Hayato213]

Yea. FBI wont install

Do a CTRNand Transfer, to an universal nand, and then do the upgrade to 11.9

https://3ds.hacks.guide/ctrtransfer.html
https://quantumcat1.github.io/9.2.0-ctrtransfer.html

 

[TheVideoEffect]

Do a CTRNand Transfer, to an universal nand, and then do the upgrade to 11.9

https://3ds.hacks.guide/ctrtransfer.html
https://quantumcat1.github.io/9.2.0-ctrtransfer.html

Why??

 

[Hayato213]

Why??

Well that is an alternative solution if you can't figure out what wrong with your FBI or your nand, there might be an issue with your nand, you got your own nand backup?