Hi All! I have an Xbox One X with no HDMI output. The port looks perfect fine. I did some probing with my multimeter and found the component marked "R12" right under the right side of the hdmi port has continuity to ground on both sides, so I believe it's shorted out. I removed the TDP158 retimer IC and the short was still there, so I believe that particular component is at fault and I'm not sure how to identify it to order a new one. If anyone could tell me what it is or how to identify it I would certainly appreciate it. Thank you!
R12 is a 0 Ohm resistor, so what you're reading on the board is perfectly fine and not the issue
[QUOTE = "Johnfeb94, publicación: 8832858, miembro: 508281"] ¡Hola a todos! Tengo una Xbox One X sin salida HDMI. El puerto se ve perfecto bien. Hice algunas pruebas con mi multímetro y encontré que el componente marcado "R12" justo debajo del lado derecho del puerto hdmi tiene continuidad a tierra en ambos lados, así que creo que está en cortocircuito. Quité el TDP158 retimer IC y el corto todavía estaba allí, así que creo que ese componente en particular tiene la falla y no estoy seguro de cómo identificarlo para pedir uno nuevo. Si alguien pudiera decirme qué es o cómo identificarlo, sin duda lo agradecería. ¡Gracias!
[ATTACH = full] 183547 [/ ATTACH] [/ QUOTE]
Hola estoy con un problema similar, lo solucionaste?
[ATTACH = full] 183547 [/ ATTACH] [/ QUOTE]
Hola estoy con un problema similar, lo solucionaste?
Similar threads
- No one is chatting at the moment.
-
-
-
-
-
-
-
-
-
-
-
@
stanleyopar2000:
I've seen a few sites mainly stockholder circlejerk blah blah sites talking about it....but ND Twitter has said nothing and Atari has been as well...I'm wondering if this is a fake story to get Atari stock up -
-
-
-
-
-
@
stanleyopar2000:
Was only trying to help but yeah it's odd that no one else especially Twitter would be talking about it
-
-
-
-
-
-
-
-
