Hacking I may have broken my switch

[magico29]

Switch doesn't show anything on the screen, only thing I get is when I plug in via usb to the pc it makes the windows connect sound

Switch doesn't show anything on the screen, only thing I get is when I plug in via usb to the pc it makes the windows connect sound

Do as crazy says and then try to get into RMC mode via jig.

 

[IIAshPII]

This is a good Sign! Try reinstalling the USB Driver (libusbK). Or use the one from TegraRCMGui

When I use Zadig the switch will show up as Unknown USB when I install libusbk it says the driver installation failed

 

[crazy_p]

Connect your Switch to your PC, open ZADIG
Press Options -> List all Devices
Choose APX in the dropdown Menu
Press the "down" Button for (libusbK 3.0.7.0)
Press Install Driver

Or try:

Open TegraRCMGui -> Settings -> Install Driver

 

[IIAshPII]

Connect your Switch to your PC, open ZADIG
Press Options -> List all Devices
Choose APX in the dropdown Menu
Press the "down" Button for (libusbK 3.0.7.0)
Press Install Driver

Or try:

Open TegraRCMGui -> Settings -> Install Driver

I appreciate everything you have done but I used a friends laptop and used TegraRCM and was able to load up the RCM I now have issues saying LP0 is missing. and update bootloader folder

 

[magico29]

I appreciate everything you have done but I used a friends laptop and used TegraRCM and was able to load up the RCM I now have issues saying LP0 is missing. and update bootloader folder

Just need to copy bootloader folder that comes with latest hekate 5.2.0 to your sd card.

 

[crazy_p]

Nice! So you were using Kosmos before?
Trash that Kosmos is Dead..
Simply inject fusee-primary.bin and you should be good to go.

Or Update Hekate and copy fusee-primary.bin
to bootloader\payloads.

Open your hekate_ipl.ini in Editor and Paste the following:

[Atmosphere SYS]
payload=bootloader/payloads/fusee-primary.bin

 

[IIAshPII]

Nice! So you were using Kosmos before?
Trash that Kosmos is Dead..
Simply inject fusee-primary.bin and you should be good to go.

Or Update Hekate and copy fusee-primary.bin
to bootloader\payloads.

Open your hekate_ipl.ini in Editor and Paste the following:

[Atmosphere SYS]
payload=bootloader/payloads/fusee-primary.bin

I believe I was as I used the sdsetup bundle and went from there.
Do I inject the fusee bin through TegraRCM?

 

[crazy_p]

It's up to you, you can inject fusee via Tegra or you can Inject Hekate and load fusee.

 

[IIAshPII]

It's up to you, you can inject fusee via Tegra or you can Inject Hekate and load fusee.

When I tried to inject through Hekate it came up with the errors and when I injected fusee i got the error failed to initialize sd card, I formatted my sd card to just have the new atmosphere and bootloader etc

 

[crazy_p]

Did you format it as Fat32?

 

[IIAshPII]

Did you format it as Fat32?

It wasn't the time since it's a 128 but it now has finally booted and I'm able to use my switch again
thankyou for everything

 

[crazy_p]

Nice to hear everything went well!

 

[magico29]

It wasn't the time since it's a 128 but it now has finally booted and I'm able to use my switch again
thankyou for everything

You got it, you are welcome.

 

[IIAshPII]

Nice to hear everything went well!

My only issue is I lost my 80+ hour xenoblade save

 

[crazy_p]

Your SaveGame should be still there try to reinstall the Game.
SaveGames are stored in your Nand, not on your SD.

Next Time use JKSV to backup your SaveGames.