Hacking How to use controller with Luma's input redirection.

[djalmafreestyler]

How to I configure 3DS buttons in my controller?
Like: B (3DS) = X (PS2 Controller)

 

[HeroMines]

How to I configure 3DS buttons in my controller?
Like: B (3DS) = X (PS2 Controller)

Try using xpadder,x360ce,etc.

 

[DeadKiller]

I tried putting the xinput1_3.dll and x360ce.ini into the /Gamepads/ folder but that didn't work either...(

Umm, you actually have to put these files in the program's folder, or in the same directory of the .exe file, not inside any folder. Try that too...

 

[HeroMines]

Umm, you actually have to put these files in the program's folder, or in the same directory of the .exe file, not inside any folder. Try that too...

Ok,I'll try that later.

 

[UsujioTarako]

I used Motioninjoy with an Offline patch for my off brand PS3 controller there is a setting inside of the program to emulate Xinput

 

[GameInCanada]

If i'm correct it's direct input.The box the controller came in said the name was "Evo VR Controller" try searching that.

https://github.com/stents-/XOutput/releases

 

[djalmafreestyler]

Does anyone have a noob tutorial how to use luma's input redirection for PS2 Controller?
I don't understand how to make external software work with this, like JoyToKey etc.

 

[abcfixtgh]

x360ce worked for me. Steps that I took:

1)Copy x360ce.exe, xinput1_3.dll and x360ce.ini into the folder containing InputRedirectionClient-Qt.exe
2)Entered 3ds IP and test the controller
3)If fail, close the program and rename xinput1_3.dll to xinput1_1.dll.

The name of the dll file is xinput1_3.dll by default. However, the format of the name is like xinput1_X.dll. So replace X from 1 to 4 and repeat the process until the controller work.

Else if, a shortcut can be taken by copying and pasting the file and having 5 copies of it with the following name:
xinput1_1.dll
xinput1_2.dll
xinput1_3.dll
xinput1_4.dll
xinput9_1_0.dll

 

[HeroMines]

x360ce worked for me. Steps that I took:

1)Copy x360ce.exe, xinput1_3.dll and x360ce.ini into the folder containing InputRedirectionClient-Qt.exe
2)Entered 3ds IP and test the controller
3)If fail, close the program and rename xinput1_3.dll to xinput1_1.dll.

The name of the dll file is xinput1_3.dll by default. However, the format of the name is like xinput1_X.dll. So replace X from 1 to 4 and repeat the process until the controller work.

Else if, a shortcut can be taken by copying and pasting the file and having 5 copies of it with the following name:
xinput1_1.dll
xinput1_2.dll
xinput1_3.dll
xinput1_4.dll
xinput9_1_0.dll

It's working now!Thanks!

 

[NDSLite_TAG]

x360ce worked for me. Steps that I took:

1)Copy x360ce.exe, xinput1_3.dll and x360ce.ini into the folder containing InputRedirectionClient-Qt.exe
2)Entered 3ds IP and test the controller
3)If fail, close the program and rename xinput1_3.dll to xinput1_1.dll.

The name of the dll file is xinput1_3.dll by default. However, the format of the name is like xinput1_X.dll. So replace X from 1 to 4 and repeat the process until the controller work.

Else if, a shortcut can be taken by copying and pasting the file and having 5 copies of it with the following name:
xinput1_1.dll
xinput1_2.dll
xinput1_3.dll
xinput1_4.dll
xinput9_1_0.dll

Yes it`s work thanks bro

 

[DeadKiller]

x360ce worked for me. Steps that I took:

1)Copy x360ce.exe, xinput1_3.dll and x360ce.ini into the folder containing InputRedirectionClient-Qt.exe
2)Entered 3ds IP and test the controller
3)If fail, close the program and rename xinput1_3.dll to xinput1_1.dll.

The name of the dll file is xinput1_3.dll by default. However, the format of the name is like xinput1_X.dll. So replace X from 1 to 4 and repeat the process until the controller work.

Else if, a shortcut can be taken by copying and pasting the file and having 5 copies of it with the following name:
xinput1_1.dll
xinput1_2.dll
xinput1_3.dll
xinput1_4.dll
xinput9_1_0.dll

Well, guess that was the way...

 

[djalmafreestyler]

x360ce worked for me. Steps that I took:

1)Copy x360ce.exe, xinput1_3.dll and x360ce.ini into the folder containing InputRedirectionClient-Qt.exe
2)Entered 3ds IP and test the controller
3)If fail, close the program and rename xinput1_3.dll to xinput1_1.dll.

The name of the dll file is xinput1_3.dll by default. However, the format of the name is like xinput1_X.dll. So replace X from 1 to 4 and repeat the process until the controller work.

Else if, a shortcut can be taken by copying and pasting the file and having 5 copies of it with the following name:
xinput1_1.dll
xinput1_2.dll
xinput1_3.dll
xinput1_4.dll
xinput9_1_0.dll

Is it possible to use a PS2 controller with this steps?

 

[HeroMines]

Is it possible to use a PS2 controller with this steps?

Probably.

 

[djalmafreestyler]

Probably.

Thanks a lot. It worked.

 

[djalmafreestyler]

x360ce worked for me. Steps that I took:

1)Copy x360ce.exe, xinput1_3.dll and x360ce.ini into the folder containing InputRedirectionClient-Qt.exe
2)Entered 3ds IP and test the controller
3)If fail, close the program and rename xinput1_3.dll to xinput1_1.dll.

The name of the dll file is xinput1_3.dll by default. However, the format of the name is like xinput1_X.dll. So replace X from 1 to 4 and repeat the process until the controller work.

Else if, a shortcut can be taken by copying and pasting the file and having 5 copies of it with the following name:
xinput1_1.dll
xinput1_2.dll
xinput1_3.dll
xinput1_4.dll
xinput9_1_0.dll

Did you get C-stick/ZL/ZR buttons working with this method? If so, how?

 

[GameInCanada]

Did you get C-stick/ZL/ZR buttons working with this method? If so, how?

They dont work in any games at the moment

 

[Midhos]

Is there a way to remap the buttons using x360ce? Simply changing the values in the box doesn't seem to work for me...
Also, is there a way to unlock the tab "Axis to Button"? Since you can control the camera with the d-pad on Monster Hunter, I thought it could just be remapped.