- Joined
- Jan 17, 2008
- Messages
- 282
- Trophies
- 0
- Age
- 32
- Location
- Under your bed.
- Website
- www.myspace.com
- XP
- 201
- Country
I bought a presoldered V4C Wii-Clip and D2Pro9 V3 from modchipcentral.
I have a D2C chipset.
I checked if the Wii-Clip or if the D2Pro9 was fake. They are both real.
I put on the protect label on the back of my D2Pro9 and covered my Wii-Clip with the cardboard piece.
I made sure I clipped it on (heard the "click" clearly).
When I turn on my Wii (still open) I can see the D2Pro9 red light turn on, so i confirmed it was working.
However, when I put in a disc, it didn't read it.
What did I miss?
Everything that came with it:
1 - presoldered wii-clip V4C with D2Pro9 V3
1 - thin red wire
Everything has been left untouched. I did not solder anything extra yet.
I have no idea what it means to "short" the "CLK", but it seems that the "CLK" point has the silver solder stuff on it.
The guide tells me to "short" it. That already seems done. But, since it didn't work, i have to "remove the CLK jumper and solder a wire from the "J" point on the motherboard to the D2Pro9 point."
http://www.wii-clip.com/
How do I remove it?...Am I even on the right track...?
On a Side Note: The D2Pro has a bright Red LED Light. It is solid and does not change or blink.
ANY help would be dearly appreciated! Thanks!
I have a D2C chipset.
I checked if the Wii-Clip or if the D2Pro9 was fake. They are both real.
I put on the protect label on the back of my D2Pro9 and covered my Wii-Clip with the cardboard piece.
I made sure I clipped it on (heard the "click" clearly).
When I turn on my Wii (still open) I can see the D2Pro9 red light turn on, so i confirmed it was working.
However, when I put in a disc, it didn't read it.
What did I miss?
Everything that came with it:
1 - presoldered wii-clip V4C with D2Pro9 V3
1 - thin red wire
Everything has been left untouched. I did not solder anything extra yet.
I have no idea what it means to "short" the "CLK", but it seems that the "CLK" point has the silver solder stuff on it.
The guide tells me to "short" it. That already seems done. But, since it didn't work, i have to "remove the CLK jumper and solder a wire from the "J" point on the motherboard to the D2Pro9 point."
http://www.wii-clip.com/
How do I remove it?...Am I even on the right track...?
On a Side Note: The D2Pro has a bright Red LED Light. It is solid and does not change or blink.
ANY help would be dearly appreciated! Thanks!