Homebrew [Help]WiiU keeps restarting

[subatpoole]

Hello, I am using the usa wiiu! One day my wiiu can only enter homebrew_launcher and cannot go back to the wiiu menu. So I just modified the config.txt in the haxchi file. Let it boot into the wiiu menu. after that. I reinstalled haxchi. I think this will work. But my WiiU keeps restarting and stuck in the wiiu menu logo interface, unable to enter the wiiu menu or homebrew_launcher. What should I do to fix my wiiu? Please help me

 

[Sypherone]

Seems to be missconfigured. Check this thread https://gbatemp.net/threads/help-my-daughters-wii-u-wont-load-up-properly.581982/page-2#post-9348344

 

[godreborn]

were you using cbhc?

 

[subatpoole]

were you using cbhc?

yes

 

[Sypherone]

If iam right. I think this was the mistake. If u run cbhc and installing haxchi over is the failer.

 

[subatpoole]

If iam right. I think this was the mistake. If u run cbhc and installing haxchi over is the failer.

what should l do？

 

[godreborn]

use the recovery mode to fix it.

 

[godreborn]

https://gbatemp.net/threads/udpih-usb-host-stack-exploit-recovery-menu.613369/

 

[subatpoole]

use the recovery mode to fix it.

So I need to buyPico?

 

[godreborn]

yes, not sure if there's any other way other than a hard mod. a pico is less than $10 if you include the device, shipping, and tax. I've tested it before, and it worked. though, I haven't cbhc bricked. you can use the buttons on the console itself, eject and power, to maneuver through the options, so a controller doesn't even need to be synced.

 

[subatpoole]

yes, not sure if there's any other way other than a hard mod. a pico is less than $10 if you include the device, shipping, and tax. I've tested it before, and it worked. though, I haven't cbhc bricked. you can use the buttons on the console itself, eject and power, to maneuver through the options, so a controller doesn't even need to be synced.

Thank you so much

 

[Sypherone]

@godeborn may correct me. But if you update or reinstall haxchi with installed CBHC. You must also rerun the CBHC installer on the used title, too.

 

[godreborn]

that may work, I know there's a way to correct this without a pico, but I think you may need to be able to get into the hbl.

 

[subatpoole]

that may work, I know there's a way to correct this without a pico, but I think you may need to be able to get into the hbl.

But my wiiu can’t get into hbl because it keep restarting and I have no idea

 

[godreborn]

But my wiiu can’t get into hbl because it keep restarting and I have no idea

then, pico may be your only choice. it should fix it.

 

[Sypherone]

Haxchi provides button combinations at boot to force to enter sysmenu or HBL, dont know if they work in your actual state.

FORCE_SYSMENU (VPAD_BUTTON_ZL | VPAD_BUTTON_ZR | VPAD_BUTTON_L | VPAD_BUTTON_R)

FORCE_HBL (VPAD_BUTTON_A | VPAD_BUTTON_B | VPAD_BUTTON_X | VPAD_BUTTON_Y)

Dont know if u get autoboot info from CBHC, then u may also enter CBHC Menu. But unsure atm if this would help and able to configure hbl to launch.

 

[subatpoole]

Haxchi在启动时提供按钮组合，以强制输入sysmenu或HBL，不知道它们是否在您的实际状态下工作。

FORCE_SYSMENU（VPAD_BUTTON_ZL | VPAD_BUTTON_ZR | VPAD_BUTTON_L | VPAD_BUTTON_R）

FORCE_HBL (VPAD_BUTTON_A | VPAD_BUTTON_B | VPAD_BUTTON_X | VPAD_BUTTON_Y)

You mean holding down ABXY at the same time?

 

[Sypherone]

Yes

 

[subatpoole]

Haxchi provides button combinations at boot to force to enter sysmenu or HBL, dont know if they work in your actual state.

FORCE_SYSMENU (VPAD_BUTTON_ZL | VPAD_BUTTON_ZR | VPAD_BUTTON_L | VPAD_BUTTON_R)

FORCE_HBL (VPAD_BUTTON_A | VPAD_BUTTON_B | VPAD_BUTTON_X | VPAD_BUTTON_Y)

Dont know if u get autoboot info from CBHC, then u may also enter CBHC Menu. But unsure atm if this would help and able to configure hbl to launch.

It doesn't work on my wiiu

 

[Sypherone]

OK. Then like mentioned you need a Rasperry Pi Pico or Zero to use "USB Descriptor Parsing Is Hard (UDPIH)" to recovery your console.