Homebrew Help on rxtools

[Michael Maistro]

I made a copy from my brothers sd card wich contained rxtools cfw.I made a backup from the whole sd card. I tried to move the backup from the sd card to an other now when i boot it it gives me an error and when i press L it doesnt load the cfw it just loads into sysnand

 

[Davidosky99]

I made a copy from my brothers sd card wich contained rxtools cfw.I made a backup from the whole sd card. I tried to move the backup from the sd card to an other now when i boot it it gives me an error and when i press L it doesnt load the cfw it just loads into sysnand

you must first create an emunand.
also, don't use rxtools, use luma3ds.
follow this guide

 

[Michael Maistro]

Thanks for the quick answer but how do i enter homebrew launcher ?

 

[Davidosky99]

Thanks for the quick answer but how do i enter homebrew launcher ?

browserhax.
follow the guide from the beggining

 

[Quantumcat]

Thanks for the quick answer but how do i enter homebrew launcher ?

Depends on your firmware version. 9.0-10.5 can use browserhax (as long as you used an internet update sometime between 9.0 and 10.5 and didn't just use cart updates). 10.6-10.7 requires a cartridge (eg FreakyForms, Cubic Ninja, OoT with save loaded on it...). Lower versions need to update to 9.0 to use the homebrew launcher. Info in https://github.com/Plailect/Guide/wiki/9.2.0-Update

 

[wormdood]

you must first create an emunand.
also, don't use rxtools, use luma3ds.
follow this guide

please at least attempt to explain a9lh if you are gonna toss that guide around

I made a copy from my brothers sd card wich contained rxtools cfw.I made a backup from the whole sd card. I tried to move the backup from the sd card to an other now when i boot it it gives me an error and when i press L it doesnt load the cfw it just loads into sysnand

if you insist on using rxtools then here are instructions for your situation

How to move Games, Saves, Themes, and Emunand to a new SD card​

I recommend trying the first method first. If you get an error using EmuNAND Tool, try the second method.

Method 1 using EmuNAND Tool

1. Get Emunand Tool (latest version, or version 1.0.1 if you get an error in step 12)
2. Insert your old SD card in your PC
3. Open Emunand Tool and select "Extract EmuNAND"
4. Save it somewhere on your PC (as [EmuNAND firmware version] emunand.bin if you want)
5. Backup all your SD card files to your PC
6. Eject your old SD card
7. Put EmuNAND9's launcher.dat on your new SD card
8. Launch EmuNAND9 using the web browser in Sysnand (URL: go.gateway-3ds.com)
9. Once in EmuNAND9, navigate to Complete EmuNAND Setup. Ignore the starter.bin warning and follow the instructions. Wait for the EmuNAND creation process to finish.
10. Turn off your 3DS
11. Insert your new SD card in your PC
12. Open Emunand Tool and select "Inject NAND to emuNAND"
13. Select the emunand.bin you made in step 4 and press OK
14. Close Emunand Tool when done - you will know it is done when the buttons are clickable again
15. Delete all the files on your new SD card
16. Put the SD card files from your backup (from step 5) on your new SD card
17. Done, emunand and data (saves, games, etc.) have been transferred to your new SD card!

Method 2 using 3DS Multi EmuNAND Creator

1. Get 3DS Multi EmuNAND Creator
2. Insert your old SD card in your PC
3. Open 3DS Multi EmuNAND Creator with Administrator privileges and select "Extract NAND"
4. Save the EmuNAND backup somewhere on your PC (as [EmuNAND firmware version] emunand.bin if you want)
5. Wait for the "Operation successfully completed!" message to pop up, then click OK. You now have your EmuNAND backup from your old SD card.
6. Backup all your SD card files to your PC
7. Close 3DS Multi EmuNAND Creator and eject your old SD card
8. Insert your new SD card in your PC
9. Open 3DS Multi EmuNAND Creator again
10. Under the Format EmuNAND section, make sure that your new SD card is selected, then click "Start Format"
11. Select the emunand bin file you made in step 4 and click Open
12. Click Yes at the warning to start the process
13. Wait for the green bar to reach the end and the "Operation successfully completed!" message to pop up, then press OK
14. Close 3DS Multi EmuNAND Creator
15. Put the SD card files from your old sd card backup (from step 5) on your new SD card
16. Done, emunand and data (saves, games, etc.) have been transferred to your new SD card!

Here is yet another method using partition managers, if the above two methods don't work for you.

. . . but you should not use rxtools
[Tutorial] Installing Luma3DS CFW (For 2DS,o3DS,N3DS - Full MenuHax+RedNAND+Autoboot Setup)

[Tutorial] Updating from rxTools to Luma3DS

 

[Davidosky99]

please at least attempt to explain a9lh if you are gonna toss that guide around
if you insist on using rxtools then here are instructions for your situation
. . . but you should not use rxtools
[Tutorial] Installing Luma3DS CFW (For 2DS,o3DS,N3DS - Full MenuHax+RedNAND+Autoboot Setup)

[Tutorial] Updating from rxTools to Luma3DS

i linked him part 3-rednand, which is enough to set up rednand and luma3ds , not installing a9lh

 

[wormdood]

i linked him part 3-rednand, which is enough to set up rednand and luma3ds , not installing a9lh

but did you tell him not to continue on with the other parts of the guide .. . .if i were him based on your post . . . i for one would have definitely finished the guide not just the page . . . if thats the only step he needed then it would help to let him know that

 

[Quantumcat]

i linked him part 3-rednand, which is enough to set up rednand and luma3ds , not installing a9lh

True, you're definitely improving, but it doesn't have a context and he won't know what to do or not do. The guides wormdood linked to are a little bit more appropriate for his situation.

But anyway congrats on not just telling him to use a9lh, linking the guide, and leaving! :-)

 

[wormdood]

But anyway congrats on not just telling him to use a9lh, linking the guide, and leaving! :-)

i would have added this myself but alas from me it would likely come off as sarcasm, instead of the sincere comment i had in mind

edit : . . . mutha-fuck auto correct

 

[Michael Maistro]

So i have to start everything again? the thingy you linked with the go.gateway when i follow the instructions it gives me an error messenge and restarts

 

[Davidosky99]

So i have to start everything again? the thingy you linked with the go.gateway when i follow the instructions it gives me an error messenge and restarts

it is stuck in which colour?
you migh have a partial downgrade, I would redowngrade just to be safe