Hacking [Help] Luma black screen

[7eonardo]

First of nothing, I can't remember how exactly this 3DS was hacked.
I tried to play online with a friend, but I needed to update the system, so I did, but when the process finished and the system reseted, I only got a black screen.
And now when I turn on the 3DS with the SD card on, the Homebrew Launcher 1.1.1 boots (like always) and when I try to launch Luma3DS (I don't know which version is) I get a black screen. But if I turn on the 3DS without the SD card, it boots normally. And, according to the system settings, the system version is 9.2.0-20U.

Any help would be appreciated!

 

[trashfloozy]

First of nothing, I can't remember how exactly this 3DS was hacked.
I tried to play online with a friend, but I needed to update the system, so I did, but when the process finished and the system reseted, I only got a black screen.
And now when I turn on the 3DS with the SD card on, the Homebrew Launcher 1.1.1 boots (like always) and when I try to launch Luma3DS (I don't know which version is) I get a black screen. But if I turn on the 3DS without the SD card, it boots normally. And, according to the system settings, the system version is 9.2.0-20U.

Any help would be appreciated!

Uhm, is your Luma perhaps on emuNAND? That's the only reason I could think of as to why the versions would be any different.

And I remember an OLD Luma would be booted through the HBL, if you haven't update with BS9.

https://3ds.hacks.guide/homebrew-launcher-(soundhax) would probably wanna be your first step with it.

 

[7eonardo]

Uhm, is your Luma perhaps on emuNAND? That's the only reason I could think of as to why the versions would be any different.

And I remember an OLD Luma would be booted through the HBL, if you haven't update with BS9.

https://3ds.hacks.guide/homebrew-launcher-(soundhax) would probably wanna be your first step with it.

Honestly I don't know if Luma is on emuNAND.
I'll follow the guide in the link you sent, one question: should I use another SD card (or format the one that I'm using (making a backup, of course)) for this?:o
Thanks for your reply!

 

[Quantumcat]

Don't format your card or you could lose your emuNAND and your data. Start from the link above, and follow https://3ds.guide/move-emunand before you continue to finalizing-setup

 

[7eonardo]

Don't format your card or you could lose your emuNAND and your data. Start from the link above, and follow https://3ds.guide/move-emunand before you continue to finalizing-setup

Thank you, you both!
I already did the whole process and it turned out well.
THANKS AGAIN

One more question:

I have another old 3ds, and I remember that I used the same guide when I hacked it, but its firmware it's 11.5.0-38U and I want to update it to the latest system version, is it safe if I do it through the system settings?

 

[Quantumcat]

Thank you, you both!
I already did the whole process and it turned out well.
THANKS AGAIN

One more question:

I have another old 3ds, and I remember that I used the same guide when I hacked it, but its firmware it's 11.5.0-38U and I want to update it to the latest system version, is it safe if I do it through the system settings?

Hold Select on boot. If you have:
- Luma 7.0.5 or less, follow https://3ds.guide/a9lh-to-b9s
- Luma 7.1, follow https://3ds.guide/updating-b9s
- Luma 8.0-8.1.1 update your boot.firm to 9.0 https://github.com/AuroraWright/Luma3DS/releases

After each of these you can update through System Settings. If you want you can skip the above, since if it works on 11.5 it will work on 11.6 too even if outdated.

 

[7eonardo]

Hold Select on boot. If you have:
- Luma 7.0.5 or less, follow https://3ds.guide/a9lh-to-b9s
- Luma 7.1, follow https://3ds.guide/updating-b9s
- Luma 8.0-8.1.1 update your boot.firm to 9.0 https://github.com/AuroraWright/Luma3DS/releases

After each of these you can update through System Settings. If you want you can skip the above, since if it works on 11.5 it will work on 11.6 too even if outdated.

Thanks bro!