Getting yellow screen when booting to stock firmware from hekate since update to 14.0.0

[MSco]

Since updating my stock firmware to 14.0.0, I get a yellow screen when booting to stock firmware from hekate.

Booting to custom firmware from hekate still works fine.
Booting to stock firmware with normal boot process (without hekate) works fine, too.

I updated hekate to the latest version today (hekate v5.7.2 & Nyx v1.2.2).

Here is my hekate_ipl.ini:

[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100

[Stock - sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/eckig/icon_stock.bmp

[CFW - emuMMC - secondary]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/eckig/icon_atmosphere_hekate.bmp

[CFW - emuMMC - primary]
payload=atmosphere/fusee.bin
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/eckig/icon_atmosphere.bmp

 

[MSco]

Ok, solved my issue. I had to replace the atmosphere/package3 with the new one from atmosphere 1.3.0.

This issue came, because I am still on atmosphere 1.2.6. So, I had the old package3 file.
I didnt want to upgrade to 1.3.0, because this release is tagged as "pre-release", which can still contain various bugs.

I am now on atm 1.2.6 with the atmosphere/package3 from 1.3.0 and this works fine.

 

[hippy dave]

Ok, solved my issue. I had to replace the atmosphere/package3 with the new one from atmosphere 1.3.0.

This issue came, because I am still on atmosphere 1.2.6. So, I had the old package3 file.
I didnt want to upgrade to 1.3.0, because this release is tagged as "pre-release", which can still contain various bugs.

I am now on atm 1.2.6 with the atmosphere/package3 from 1.3.0 and this works fine.

Glad you got it working, but the package3 is a large proportion of Atmosphere, so you're basically running 1.3.0 with a couple of wrong files. Despite your hesitation about running a prerelease, you're probably better off running 1.3.0 in its entirety than an untested mixture.

 

[MSco]

@hippy dave
Ok, thank you. I wasnt aware about the package3 file being such an important part of atmosphere itself. I thought, it would be only used for booting.

So, I updated atmosphere to 1.3.0 now. Thank you for the hint!

 

[fabio85]

Since updating my stock firmware to 14.0.0, I get a yellow screen when booting to stock firmware from hekate.

Booting to custom firmware from hekate still works fine.
Booting to stock firmware with normal boot process (without hekate) works fine, too.

I updated hekate to the latest version today (hekate v5.7.2 & Nyx v1.2.2).

Here is my hekate_ipl.ini:

[config]
autoboot=0
autoboot_list=0
bootwait=0
autohosoff=0
autonogc=1
updater2p=1
backlight=100

[Stock - sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/eckig/icon_stock.bmp

[CFW - emuMMC - secondary]
fss0=atmosphere/package3
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/eckig/icon_atmosphere_hekate.bmp

[CFW - emuMMC - primary]
payload=atmosphere/fusee.bin
kip1patch=nosigchk
emummcforce=1
atmosphere=1
icon=bootloader/res/eckig/icon_atmosphere.bmp

Hello my friend, quick question for you, what is the procedure you are following to boot to ofw without hekate?

 

[MSco]

Well, with an unmodded V1 Switch, you can simply boot your switch to ofw by pressing the power button, when it's turned off, if you didn't overwrite boot0.



Nevertheless, my problem is already solved. This thread is almost one year old.