Evercade CFW and adding ROMS without EverSD?

[esmith13]

On windows now. Trying RkDevTool (the GUI version, I could not find a windows build of the rkdeveloptool command-line utility, but both appear to have the same functions.)

Tried with the Rockchip drivers and all RK3126 loader and MiniLoader versions I could find - no dice, fails after a few seconds.

Tried again with the drivers from the SuperPocket updater (taito version, since I had to choose one and Data East version doesn't have an updater) - no dice, but it fails instantly instead of after a few seconds.

Do you see "Super Pocket Download Mode" in Device manager with it connected in flash mode?
I would only bother testing with the bootloader you found marked as being specifically for the Super Pocket.

Don't use the GUI "RKDevTool" you need "rkdeveloptool.exe".
https://github.com/rageworx/rkdeveloptool

 

[pzyn]

Do you see "Super Pocket Download Mode" in Device manager with it connected in flash mode?
I would only bother testing with the bootloader you found marked as being specifically for the Super Pocket.

Don't use the GUI "RKDevTool" you need "rkdeveloptool.exe".
https://github.com/rageworx/rkdeveloptool

Thank you - the Super Pocket drivers combined with the specific win32 rkdeveloptool exe you linked and the "super pocket bootloader (world)" bin from lolroms did the trick, I was able to run rkdeveloptool db just fine!

Now I just have to work out how to access and patch things - the rootfs partition doesn't seem to be any type of identifiable filesystem as far as I can tell (it's not squashfs, and not ext4 like cfg?), though I can get into the cfg partition just fine.

Another snag - I'm figuring out partition sizes to pass into rl by subtracting the next partition's LBA address from the one I'm targeting, a strategy which doesn't work for the final partition (userdata).