My switch I'm repairing is stuck on error screen 2101-0001. It initially would not charge and after replacing the M92T36 chip it now charges, but the error remains. The switch restarts if I try to get it into recovery mode.
Pin 5 has 0v while switch is on and not charging, 3.84v while on and charging
Pin 6 has 3.33 volts while on and both charging and not charging
The PI3USB capacitor does not show a short.
Any ideas what could be the issue?
Pin 5 has 0v while switch is on and not charging, 3.84v while on and charging
Pin 6 has 3.33 volts while on and both charging and not charging
The PI3USB capacitor does not show a short.
Any ideas what could be the issue?