I've disassembled my DSi because of liquid that when in to it's bottom part. Cleaned it up and reassembled it without touching the top part or the wires/ribbon cables coming out of the ring. Everything works just fine. But the door feels loose from the side where the wires comes out. I've reopen it and checked that this those not effect the wires/ribbon cables that are coming from the top part. But that looseness is annoying. All screws are tight (enough).
Including pictures isn't helpful. But, if you have a DSi, and you pressed on the hing place next to where he wires/ribbon cables go throw (the side that have no lights), the top part slightly go off place. You can even try separating the parts between the hing and you can see the metal part in there. The other part on the other hinge (next to lights) seems to be fine.
Is there a way to fix that, or that happen whenever you open the device for the first time and can't be tightened again. I also might be mistaken and it was like that from the beginning and I didn't notice.
Including pictures isn't helpful. But, if you have a DSi, and you pressed on the hing place next to where he wires/ribbon cables go throw (the side that have no lights), the top part slightly go off place. You can even try separating the parts between the hing and you can see the metal part in there. The other part on the other hinge (next to lights) seems to be fine.
Is there a way to fix that, or that happen whenever you open the device for the first time and can't be tightened again. I also might be mistaken and it was like that from the beginning and I didn't notice.
