Hacking Dios Mios Lite

[SanGor]

dmlr32 doesn't even show me a DML section in wiiflow 418 lol

That's a wiiflow issue, they probably have some funky way to detect DML.

 

[IceIceBird]

dmlr32 doesn't even show me a DML section in wiiflow 418 lol

You should post that in the wiiflow thread and not in this thread, and actually I think the "Loaders" shows your games on the SD even if you don't have DML installed (maybe I'm wrong with this allegation).

 

[secretchaos1]

Trying to update again from r21, using postloader 3.60.2

r30 - Black Screens on Sonic Adventure 2 and Megaman Aniversary
r29 - Doesn't load into anything
r28 - Doesn't load into anything
r26 - Black screens on Sa2 and Megaman Aniversary

back to r21 - Everything works fine on Sa2 and Megaman Aniversary besides short stutters.

Is there something I'm doing wrong with the later revisions? I'm creating the wads for them the same way I did r21, using DML createwad 0.7.

 

[KazoWAR]

Tested some games with DMLr30

Pokemon Colosesum -> Freezes on a Black screen after the Pokemon Company splash screen.
Pokemon XD - Gale of Darkness -> Freezes on the Pokemon XD title screen with a loud buzzing sound.
Luigi's Mansion -> No problems found, played up to the first boss battle.
Super Smash Bros. Melee -> No Problems found, only did 2 matches.
Mario Kart - Double Dash -> No problems found, but after a few races I encounted an "error has occoured" message.

Also would like to request saving games to a SD card if its possible.

 

[SuperrSonic]

Trying to update again from r21, using postloader 3.60.2

r30 - Black Screens on Sonic Adventure 2 and Megaman Aniversary
r29 - Doesn't load into anything
r28 - Doesn't load into anything
r26 - Black screens on Sa2 and Megaman Aniversary

back to r21 - Everything works fine on Sa2 and Megaman Aniversary besides short stutters.

Is there something I'm doing wrong with the later revisions? I'm creating the wads for them the same way I did r21, using DML createwad 0.7.

Hmm, I tried Sonic Heroes with r30 and it works perfectly , I'm gonna try SA2B in a few and see if it's just you. I had nothing in the usb ports by the way.

 

[secretchaos1]

Hmm, I tried Sonic Heroes with r30 and it works perfectly , I'm gonna try SA2B in a few and see if it's just you. I had nothing in the usb ports by the way.

Okay, thanks. I had my HDD in one of my usb ports, so if that's a problem I'll try taking it out and reinstalling r30. I'll wait on your test with Sa2 first to make sure though.

 

[SuperrSonic]

Hmm, I tried Sonic Heroes with r30 and it works perfectly , I'm gonna try SA2B in a few and see if it's just you. I had nothing in the usb ports by the way.

Okay, thanks. I had my HDD in one of my usb ports, so if that's a problem I'll try taking it out and reinstalling r30. I'll wait on your test with Sa2 first to make sure though.

I got a black screen...

 

[secretchaos1]

I got a black screen...

Ah, so it's not just me. I'll stick with r21 for now then until the issues are resolved.

 

[RODAuOM599]

I've tried yet again Pokemon Colosseum, but this time i didn't use fstfix or DiscEx -c. I got through the first video, I managed to skip it. Then played a little while, then a trainer wants a battle... But the game freezes with a loud buzz sound. Also, it was loaded via postLoader. When the game loaded (nintendo logo appeared) I pulled out the game disc inside ( a demo recompilation game) and it worked to the part I mentioned above. DML r32. gonna try this with r25 & r30.

 

[SanGor]

Is anyone here using SNEEK and getting a blackscreen?

 

[qwertymodo]

If anybody wants to build DML from source, here's a package to build the full wad. Extract the folder to the root of your DML source checkout, then copy a MIOS wad into the MIOSv10 folder and run buildwad/buildWAD.bat. If you have issues, try cleanDML.bat, then retry.

EDIT: Also, any time you update your checkout, be sure to run cleanDML.bat or makeDML.bat or else buildWAD.bat will compile a wad using the previously compiled version.

EDIT 2: Nevermind, I just made that mistake myself and I can see it's going to get annoying reeeeal fast. I'm uploading a fixed version that will recompile every time (compiling really doesn't take that long anyway...) so you won't have to worry about that.

 

[BretHershberger]

I just updated to r30 to try it out and everything works great... however, I am having some issues after about 20 min, with the "error has occurred" messages.

I haven't had a lot of time to do indepth testing but it was on Billy Hatcher after about 20 min. of playtime.

Wii 4.2
Bootmii
DML rev 30

Billy Hatcher DiscEX -c

 

[farcry15]

i'm still on r25 and every game works perfectly for me. i can pm it if anyone wants.

 

[zerofalcon]

Is anyone here using SNEEK and getting a blackscreen?

Here. Sneek+DI rev192 bootmii@boot2. No black screen but I didn't installed correctly DMLr30 in the BC emulated NAND folder because when I select a game (Mario Kart DD) it loads fine but with a lot of sound issues and no responding control.

Without messing with BC and MIOS on the emulated NAND everything works ok.. still the same random "an error has ocurred" after some playing time

 

[hellboy2010]

Is anyone here using SNEEK and getting a blackscreen?

yes me
sneek+di r192 (bootmii @ios)
DML r32
launch game =black screen

sneek+di r192(bootmii @ios)
DML r21
working fine

 

[qwertymodo]

r32 gives me the same disc read error as r30 (after playing awhile, not immediately on boot).

My setup:
DMLr32 (self-compiled)
8GB, class 10 SDHC
All games processed with DiscEx -c -a

Tales of Symphonia - Disc read error a ways in to the opening video
Zelda: Wind Waker - Disc read error upon sailing into one of the glowing rings indicating sunken treasure

 

[TSY]

is there a precompiled r32.elf available for download so that we can test?

I don't know how to download the source not to say to compile it.

 

[sk0ld]

Here. Sneek+DI rev192 bootmii@boot2. No black screen but I didn't installed correctly DMLr30 in the BC emulated NAND folder because when I select a game (Mario Kart DD) it loads fine but with a lot of sound issues and no responding control.

When using DML with *NEEK, you not only have to have it launch from BC, but have to comment this line as well.

 

[zerofalcon]

Here. Sneek+DI rev192 bootmii@boot2. No black screen but I didn't installed correctly DMLr30 in the BC emulated NAND folder because when I select a game (Mario Kart DD) it loads fine but with a lot of sound issues and no responding control.

When using DML with *NEEK, you not only have to have it launch from BC, but have to comment this line as well.

Thanks I'll try again

 

[zerowalker]

When i tried Mario Sunshine with, well the first working revision of these.
Everything worked, but i then tried to Reset the wii, nothing happened, i then tried again, nothing, then i got the Error that everyone is getting.

not sure it helps, or not even sure it was the drive reset thing(also i had removed the game some time after boot i think).