Hacking Dev LaunchmyCraft Ported Lakka to the Switch

[Deleted User]

I also get the same joystick and touchscreen response when failing to load a DS rom. it eventually says failed to load, and goes back to lakka. but in the core it seems something is going right with the drivers .

anyway, hope this info helps. great work with this!!

i think he trys to grab the RetroArch.Cfg once going back to the menu and stops taking it after some time

 

[Irastris]

I also get the same joystick and touchscreen response when failing to load a DS rom. it eventually says failed to load, and goes back to lakka. but in the core it seems something is going right with the drivers .

anyway, hope this info helps. great work with this!!

Which DS core? My understanding is that Desmume is incompatible with ARM, therefore it won't run on Switch.

 

[Tilde88]

Which DS core? My understanding is that Desmume is incompatible with ARM, therefore it won't run on Switch.

melonds (built-in)

 

[Deleted User]

Which DS core? My understanding is that Desmume is incompatible with ARM, therefore it won't run on Switch.

Also Citra is now available for ARM

 

[Irastris]

melonds (built-in)

Yuck, doesn't MelonDS force native resolution?

Also Citra is now available for ARM

Citra is 3DS, not DS.

 

[Tilde88]

Yuck, doesn't MelonDS force native resolution?

Citra is 3DS, not DS.

I mean, its a pre-alpha dev build, i was surprised to even see it in there

 

[Deleted User]

I mean, its a pre-alpha dev build, i was surprised to even see it in there

really think that lakka fails to refresh the config file and it gets lost in the schuffle the reason why touch and joycon drops , after a crash it can reload the file

 

[Tilde88]

really think that lakka fails to refresh the config file and it gets lost in the schuffle the reason why touch and joycon drops , after a crash it can reload the file

wish i knew lol

 

[Deleted User]

wish i knew lol

Length: 7192464 (6.9M) [application/x-gzip]
Saving to: 'sources/dvb-firmware/dvb-firmware-1.2.2.tar.gz'

sources/dvb-firmwar 100%[===================>]   6.86M  1.44MB/s    in 5.3s   

2018-05-22 23:17:35 (1.29 MB/s) - 'sources/dvb-firmware/dvb-firmware-1.2.2.tar.gz' saved [7192464/7192464]

INFO Calculated checksum is: 2e39a0a85db54de7f38bd8e522e48445257f4edefe61d1e264079b0c45bc1fcc

  UNPACK   dvb-firmware
  BUILD    dvb-firmware (target)
  BUILD    linux-firmware (target)
  INSTALL    linux-firmware (target)
      INSTALL    misc-firmware (target)
      INSTALL    wlan-firmware (target)
      INSTALL    dvb-firmware (target)
  BUILD    switch-bootloader (target)
/root/Lakka-LibreELEC/projects/Switch/packages/switch-bootloader/package.mk: line 7: mkimage: command not found
Makefile:27: recipe for target 'image' failed
make: *** [image] Error 127

 

[Tilde88]

snip

you are missing u-boot for linux

sudo apt install u-boot-tools

 

[Orthopox1]

Anyone have a prebuilt image yet? Would love to test this.

 

[Tilde88]

Anyone have a prebuilt image yet? Would love to test this.

That would be unethical to do.

 

[Orthopox1]

That would be unethical to do.

What?

 

[natinusala]

Here's a crazy idea. Could you reproduce exactly that and if you can make the joysticks work again, please enable advanced settings (in user interface) and tell me the list of all enabled / used drivers ? Then, go to Inputs for user 1 and take a photo of what you see. Thanks !

--------------------- MERGED ---------------------------

Also Citra was disabled by Lakka developers some time ago. They must have had a good reason to do so.

 

[Deleted User]

Here's a crazy idea. Could you reproduce exactly that and if you can make the joysticks work again, please enable advanced settings (in user interface) and tell me the list of all enabled / used drivers ? Then, go to Inputs for user 1 and take a photo of what you see. Thanks !

--------------------- MERGED ---------------------------

Also Citra was disabled by Lakka developers some time ago. They must have had a good reason to do so.

i will do that once my lakka is compiled is taking for ever -.-

 

[Tilde88]

i will do that once my lakka is compiled is taking for ever -.-

Lol 20 gigs will do that

--------------------- MERGED ---------------------------

Here's a crazy idea. Could you reproduce exactly that and if you can make the joysticks work again, please enable advanced settings (in user interface) and tell me the list of all enabled / used drivers ? Then, go to Inputs for user 1 and take a photo of what you see. Thanks !

--------------------- MERGED ---------------------------

Also Citra was disabled by Lakka developers some time ago. They must have had a good reason to do so.

The problem is, that during that errored mode, no thing could be selected.

I am able to reproduce the same joystick and touchscreen thing when I try to load pokemon black 2 in the melonds core, the cursor appears, responds to touch and joystick, then the core closes, and is back to the lakka "desktop", at which point the cursor disappears

 

[natinusala]

Uuhhhhh... Okay, I'll figure this out then.

 

[natinusala]

Oh no it leaked https://drive.google.com/open?id=1UWCP1PvWDG96SoWExiETM90P8qwHPkCR

 

[crow132]

Oh no it leaked https://drive.google.com/open?id=1UWCP1PvWDG96SoWExiETM90P8qwHPkCR

thank you very much!

sorry if im a little outdated, but is there anyway to run linux on switch directly from windows?

 

[Deleted User]

Oh no it leaked https://drive.google.com/open?id=1UWCP1PvWDG96SoWExiETM90P8qwHPkCR

well thanks , i am compiling now for over 14 hours for fun ^^