Hacking Crappy Bootrate using Menuhax 2.1 and rxTools

[dpad_5678]

Anyway To Increase The Bootrate?

I am Using @ihaveamac 's Modified Payloads (For No Colors or Debug Output) . I Am Also Using This Menuhax Image.

The Restarting Probably Isn't Very "Healthy" For The 3DS or The Battery.

Anyway to Increase The Bootrate?


Thanks Guys.





EDIT: Here Is The rxTools Build I Am Using.

 

[YourHero]

Im hearing RXtools in general has a crappy boot rate. These issues dont happen on GW so I can only suggest another CFW. I don't really know much about their differences though.

 

[carlitos92jose]

are you using ctrbootmanager?

 

[dpad_5678]

are you using ctrbootmanager?

Nope.

 

[AmandaRose]

Ii tried the no color mod payload and my boot rate for rxTools dropped from about 9 times out of ten to about 6 out of ten I then put the proper payload back on sd and am now back to 9 out of 10 so doing the same may help you.

 

[carlitos92jose]

Nope.

I was having the same issue, what I did was delete menuhax and reinstall it, then use ctrbootmanager and boot the rxtools.3dsx from there and it seems much better install ctrbootmanager and use my boot.cfg edit: Im using the normal payload not the modified that might help

Spoiler: boot.cfg

// Boot menu configuration
boot_config =
{
// Default timeout in secondes
// If timeout = -1, disable autoboot
timeout = 0;

// Some devices (n3ds?) seems to have
// some timing problems when using timeout=0 (autoboot).
// You may increase this value to improve boot success rate.
// Default delay (8) should be good for o3ds, 2 seems good for n3ds
autobootfix = 9;

// if timeout = 0 (autoboot),
// hold this key to enter the menu
// keycode list : https://goo.gl/4XLDIL
recovery = 2; // SELECT

// Default boot entry
default = 0;

// Boot menu entries (11 max)
entries =
(
{
title = "rxTools";
path = "/rxTools.3dsx";
},
{
title = "HomeBrewMenu";
path = "/boot_hb.3dsx"
key = 3; // Start
}
);
};

 

[dpad_5678]

I was having the same issue, what I did was delete menuhax and reinstall it, then use ctrbootmanager and boot the rxtools.3dsx from there and it seems much better install ctrbootmanager and use my boot.cfg edit: Im using the normal payload not the modified that might help

Spoiler: boot.cfg

// Boot menu configuration
boot_config =
{
// Default timeout in secondes
// If timeout = -1, disable autoboot
timeout = 0;

// Some devices (n3ds?) seems to have
// some timing problems when using timeout=0 (autoboot).
// You may increase this value to improve boot success rate.
// Default delay (8) should be good for o3ds, 2 seems good for n3ds
autobootfix = 9;

// if timeout = 0 (autoboot),
// hold this key to enter the menu
// keycode list : https://goo.gl/4XLDIL
recovery = 2; // SELECT

// Default boot entry
default = 0;

// Boot menu entries (11 max)
entries =
(
{
title = "rxTools";
path = "/rxTools.3dsx";
},
{
title = "HomeBrewMenu";
path = "/boot_hb.3dsx"
key = 3; // Start
}
);
};

Thanks Man!

 

[Vampirex]

I was having the same issue, what I did was delete menuhax and reinstall it, then use ctrbootmanager and boot the rxtools.3dsx from there and it seems much better install ctrbootmanager and use my boot.cfg edit: Im using the normal payload not the modified that might help

I did something similar:
menuhax 2.1
rxtools updated to nightly build
ctrbootmanager
o3ds custom payload (higher bootrate apparently, found on GBAtemp)

but using a different path to boot:

title  = "RX-E EmuNAND Mode";
path = "/rxTools/sys/code.bin";
offset = "0x12000";

My boot rate is 100% so far, havn't had a black or yellow screen in a while now. *Crossing Fingers*

 

[dpad_5678]

I did something similar:
menuhax 2.1
rxtools updated to nightly build
ctrbootmanager
o3ds custom payload (higher bootrate apparently, found on GBAtemp)

but using a different path to boot:

title  = "RX-E EmuNAND Mode";
path = "/rxTools/sys/code.bin";
offset = "0x12000";

My boot rate is 100% so far, havn't had a black or yellow screen in a while now. *Crossing Fingers*

What Nightly Are You Using?

If You Could Upload It, That Would Be Great, as http://lavanoid.github.io Links Always Lead To A 429 Error On Dropbox.

 

[DaBlackDeath]

I did something similar:
menuhax 2.1
rxtools updated to nightly build
ctrbootmanager
o3ds custom payload (higher bootrate apparently, found on GBAtemp)

but using a different path to boot:

title  = "RX-E EmuNAND Mode";
path = "/rxTools/sys/code.bin";
offset = "0x12000";

My boot rate is 100% so far, havn't had a black or yellow screen in a while now. *Crossing Fingers*

yep, I've been using same path and happy with 100%.

 

[Vampirex]

What Nightly Are You Using?

If You Could Upload It, That Would Be Great, as http://lavanoid.github.io Links Always Lead To A 429 Error On Dropbox.

Try here, but looks like a new one came out today:
https://www.omicron.pw/

 

[dpad_5678]

Try here, but looks like a new one came out today:
https://www.omicron.pw/

thanks mate

 

[dpad_5678]

Try here, but looks like a new one came out today:
https://www.omicron.pw/

Hmmm.... Using That Build With These CTRBootManager Settings:

title  = "RX-E EmuNAND Mode";
path = "/rxTools/sys/code.bin";
offset = "0x12000";

Gives a black screen after the rxTools splash screen when EmuNAND is supposed to start.

 

[MelonGx]

- Use CtrBootManager instead of other methods
- You must change autobootfix to 2 in boot.cfg
- Confirm that your emuNAND ISN'T 9.6-10.4

 

[dpad_5678]

- Use CtrBootManager instead of other methods
- You must change autobootfix to 2 in boot.cfg
- Confirm that your emuNAND ISN'T 9.6-10.4

My EmuNAND is 10.1.
My aubootfix is 9, more then the recommended, so that should make it better if anything?

 

[James310]

I put my Autoboot fix from 2 to 0 and my boot rate went from 7/10 to like 9/10 when using reinand, the delay caused it to be worse

 

[dubbz82]

Unless you're specifically using the tools that rxTools has, I'd recommend Cake's cfw....if you're not making use of the more advanced features and simply want an emunand, it works fine (and has a higher boot rate, from what i've seen).

 

[MelonGx]

My EmuNAND is 10.1.
My aubootfix is 9, more then the recommended, so that should make it better if anything?

rxTools on N3DS 9.6-10.4 = blackscreen.
Autobootfix much more than 2 may make it crappier on N3DS .

 

[dpad_5678]

rxTools on N3DS 9.6-10.4 = blackscreen.
Autobootfix much more than 2 may make it crappier on N3DS .

I have an O3DS XL btw

 

[MelonGx]

I have an O3DS XL btw

O3DS never has that emuNAND problem.
The default autobootfix value is also written for O3DS, so it will not have the additional problems what I have written.