TEMPORARY MODE ENABLED
New posts, edits, and any changes will not be saved during the transition period.
Registrations are temporarily disabled until the migration is complete.

  1. dpad_5678

    OP dpad_5678 Ape weak on own. Ape strong in unity.
    Member

    Joined:
    Nov 19, 2015
    Messages:
    2,211
    Country:
    United States
    Anyway To Increase The Bootrate?

    I am Using @ihaveamac 's Modified Payloads (For No Colors or Debug Output) . I Am Also Using This Menuhax Image.

    The Restarting Probably Isn't Very "Healthy" For The 3DS or The Battery.

    Anyway to Increase The Bootrate?


    Thanks Guys.





    EDIT: Here Is The rxTools Build I Am Using.
     
    Last edited by dpad_5678, Jan 20, 2016
  2. YourHero

    YourHero GBAtemp Maniac
    Member

    Joined:
    Apr 22, 2010
    Messages:
    1,025
    Country:
    United States
    Im hearing RXtools in general has a crappy boot rate. These issues dont happen on GW so I can only suggest another CFW. I don't really know much about their differences though.
     
  3. carlitos92jose

    carlitos92jose Advanced Member
    Newcomer

    Joined:
    May 11, 2010
    Messages:
    93
    Country:
    United States
    are you using ctrbootmanager?
     
    sblast3 likes this.
  4. dpad_5678

    OP dpad_5678 Ape weak on own. Ape strong in unity.
    Member

    Joined:
    Nov 19, 2015
    Messages:
    2,211
    Country:
    United States
    Nope.
     
  5. AmandaRose

    AmandaRose Do what I do. Hold tight and pretend it’s a plan
    Member

    Joined:
    Aug 19, 2015
    Messages:
    8,651
    Country:
    United Kingdom
    Ii tried the no color mod payload and my boot rate for rxTools dropped from about 9 times out of ten to about 6 out of ten I then put the proper payload back on sd and am now back to 9 out of 10 so doing the same may help you.
     
    carlitos92jose likes this.
  6. carlitos92jose

    carlitos92jose Advanced Member
    Newcomer

    Joined:
    May 11, 2010
    Messages:
    93
    Country:
    United States
    I was having the same issue, what I did was delete menuhax and reinstall it, then use ctrbootmanager and boot the rxtools.3dsx from there and it seems much better install ctrbootmanager and use my boot.cfg edit: Im using the normal payload not the modified that might help
    // Boot menu configuration
    boot_config =
    {
    // Default timeout in secondes
    // If timeout = -1, disable autoboot
    timeout = 0;

    // Some devices (n3ds?) seems to have
    // some timing problems when using timeout=0 (autoboot).
    // You may increase this value to improve boot success rate.
    // Default delay (8) should be good for o3ds, 2 seems good for n3ds
    autobootfix = 9;

    // if timeout = 0 (autoboot),
    // hold this key to enter the menu
    // keycode list : https://goo.gl/4XLDIL
    recovery = 2; // SELECT

    // Default boot entry
    default = 0;

    // Boot menu entries (11 max)
    entries =
    (
    {
    title = "rxTools";
    path = "/rxTools.3dsx";
    },
    {
    title = "HomeBrewMenu";
    path = "/boot_hb.3dsx"
    key = 3; // Start
    }
    );
    };
     
    Last edited by carlitos92jose, Jan 20, 2016
  7. dpad_5678

    OP dpad_5678 Ape weak on own. Ape strong in unity.
    Member

    Joined:
    Nov 19, 2015
    Messages:
    2,211
    Country:
    United States
    Thanks Man!
     
    carlitos92jose likes this.
  8. Vampirex

    Vampirex Dhampir
    Member

    Joined:
    Mar 12, 2008
    Messages:
    254
    Country:
    Canada
    I did something similar:
    menuhax 2.1
    rxtools updated to nightly build
    ctrbootmanager
    o3ds custom payload (higher bootrate apparently, found on GBAtemp)

    but using a different path to boot:
    Code:
    title  = "RX-E EmuNAND Mode";
    path = "/rxTools/sys/code.bin";
    offset = "0x12000";
    
    My boot rate is 100% so far, havn't had a black or yellow screen in a while now. *Crossing Fingers*
     
    Last edited by Vampirex, Jan 20, 2016
  9. dpad_5678

    OP dpad_5678 Ape weak on own. Ape strong in unity.
    Member

    Joined:
    Nov 19, 2015
    Messages:
    2,211
    Country:
    United States
    What Nightly Are You Using?

    If You Could Upload It, That Would Be Great, as http://lavanoid.github.io Links Always Lead To A 429 Error On Dropbox.
     
  10. DaBlackDeath

    DaBlackDeath .::[ lone wolf ]::.
    Member

    Joined:
    Dec 22, 2007
    Messages:
    925
    Country:
    Germany
    yep, I've been using same path and happy with 100%.
     
  11. Vampirex

    Vampirex Dhampir
    Member

    Joined:
    Mar 12, 2008
    Messages:
    254
    Country:
    Canada
    Try here, but looks like a new one came out today:
    https://www.omicron.pw/
     
  12. dpad_5678

    OP dpad_5678 Ape weak on own. Ape strong in unity.
    Member

    Joined:
    Nov 19, 2015
    Messages:
    2,211
    Country:
    United States
    thanks mate :)
     
  13. dpad_5678

    OP dpad_5678 Ape weak on own. Ape strong in unity.
    Member

    Joined:
    Nov 19, 2015
    Messages:
    2,211
    Country:
    United States
    Hmmm.... Using That Build With These CTRBootManager Settings:
    Code:
    title  = "RX-E EmuNAND Mode";
    path = "/rxTools/sys/code.bin";
    offset = "0x12000";
    Gives a black screen after the rxTools splash screen when EmuNAND is supposed to start.
     
    Last edited by dpad_5678, Jan 21, 2016
  14. MelonGx

    MelonGx GBAtemp Advanced Maniac
    Member

    Joined:
    Jan 8, 2009
    Messages:
    1,647
    Country:
    China
    - Use CtrBootManager instead of other methods
    - You must change autobootfix to 2 in boot.cfg
    - Confirm that your emuNAND ISN'T 9.6-10.4
     
    Last edited by MelonGx, Jan 21, 2016
  15. dpad_5678

    OP dpad_5678 Ape weak on own. Ape strong in unity.
    Member

    Joined:
    Nov 19, 2015
    Messages:
    2,211
    Country:
    United States
    My EmuNAND is 10.1.
    My aubootfix is 9, more then the recommended, so that should make it better if anything?
     
  16. James310

    James310 GBAtemp Advanced Fan
    Member

    Joined:
    Oct 4, 2015
    Messages:
    977
    Country:
    United States
    I put my Autoboot fix from 2 to 0 and my boot rate went from 7/10 to like 9/10 when using reinand, the delay caused it to be worse
     
  17. dubbz82

    dubbz82 GBAtemp Advanced Maniac
    Member

    Joined:
    Feb 2, 2014
    Messages:
    1,572
    Country:
    United States
    Unless you're specifically using the tools that rxTools has, I'd recommend Cake's cfw....if you're not making use of the more advanced features and simply want an emunand, it works fine (and has a higher boot rate, from what i've seen).
     
  18. MelonGx

    MelonGx GBAtemp Advanced Maniac
    Member

    Joined:
    Jan 8, 2009
    Messages:
    1,647
    Country:
    China
    rxTools on N3DS 9.6-10.4 = blackscreen.
    Autobootfix much more than 2 may make it crappier on N3DS .
     
    Last edited by MelonGx, Jan 21, 2016
  19. dpad_5678

    OP dpad_5678 Ape weak on own. Ape strong in unity.
    Member

    Joined:
    Nov 19, 2015
    Messages:
    2,211
    Country:
    United States
    I have an O3DS XL btw :)
     
  20. MelonGx

    MelonGx GBAtemp Advanced Maniac
    Member

    Joined:
    Jan 8, 2009
    Messages:
    1,647
    Country:
    China
    O3DS never has that emuNAND problem.
    The default autobootfix value is also written for O3DS, so it will not have the additional problems what I have written.
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - Bootrate, Menuhax, rxTools