Hacking Codes In Ultimate UsbLaader 1.1

[icebrg5]

gots to go, c u peeps later

Posts merged

If using the ocarina feature in the ultimate loader do you need a config file on the sd card or anything?

All i did was put the ultimate loader dol onto my sd card in the apps folder and ran it and pushed 2 to activate the code and started the game and no codes worked.

It was for mario kart and yes its the right code because before trying it through the loader i loaded the game through ocarina itself in the homebrew channel with my disc copy of mario kart.

just make sure you have the .gct file in codes folder on root of SD card

Thats exactly where its at and the dol im using is USB LOADER ULTIMATE VERSION which has all verisons inside its rar folder and im using the standard adult one.

Maybe you should get an updated one since Ocarina was broken in some of the older editions.

Just downloaded the latest version 6.7 for loader 1.4.Gonna try it later tonight.

So by default i dont need any type of config file on the sd card in order to use ocarnia correct?
The config files are to set certain values to load every single time instead of pushing the 2 button each time to load ocarnia right?

 

[icebrg5]

gots to go, c u peeps later

Posts merged

If using the ocarina feature in the ultimate loader do you need a config file on the sd card or anything?

All i did was put the ultimate loader dol onto my sd card in the apps folder and ran it and pushed 2 to activate the code and started the game and no codes worked.

It was for mario kart and yes its the right code because before trying it through the loader i loaded the game through ocarina itself in the homebrew channel with my disc copy of mario kart.

just make sure you have the .gct file in codes folder on root of SD card

Thats exactly where its at and the dol im using is USB LOADER ULTIMATE VERSION which has all verisons inside its rar folder and im using the standard adult one.I believe its version 4

Gonna download the lastest verison and try it later tonight.

to tell you the truth, i didn't mess with the config.txt and my codes work. when you boot your game does it says SD codes found?

It didnt say anything when i tried it through the loader but when i ran it normally by going through ocarnia in the homebrew channel it told me codes were found.

Gonna try it out later with a newer version of the ultimate loader and see how it goes.


I do have one more question though.

I've seem vidoes on youtube of people using ocarnia on mario kart and they get unlimited items over and over again and the items they use change each time.The code i used only let you have one item at all times.
How can i make it so i can cycle through the different items and use the ones i want?

Im using the codes from usbgecko.com/codes and i only see the codes for having 1 item all the time and adding more then one code on ocarnia just over rides the previous one correct?

 

[saelee84]

i left my config for ocarina on default, so i press 2 when i want the codes on.

 

[icebrg5]

i left my config for ocarina on default, so i press 2 when i want the codes on.

So i need a config file on the sd card then right?


All i was using was just the boot.dol to load the loader.

 

[KongsNutz]

HAHA it's not realy mt ultimate loader, i contributed...as have many people.

Hungyip85 is pretty much the guy that added everything.

unless your talking about the GUI laoder then i did do some of that........but i don't think you are haha

 

[saelee84]

i left my config for ocarina on default, so i press 2 when i want the codes on.

So i need a config file on the sd card then right?


All i was using was just the boot.dol to load the loader.

using boot.dol is fine, just as long .gct is in you codes file on root of SD card. i'm using V6.7 Ultimate loader (v1.4), i don't think you need any config.txt. try this threadhttp://gbatemp.net/index.php?showtopic=147085&st=0&start=0

 

[icebrg5]

i left my config for ocarina on default, so i press 2 when i want the codes on.

So i need a config file on the sd card then right?


All i was using was just the boot.dol to load the loader.

using boot.dol is fine, just as long .gct is in you codes file on root of SD card. i'm using V6.7 Ultimate loader (v1.4), i don't think you need any config.txt. try this threadhttp://gbatemp.net/index.php?showtopic=147085&st=0&start=0

Thats the one im gonna try out later after the kids go to bed.
I will report back then


Can anyone answer my other question about Mario Kart.How is it possible to get unlimited items of more then 1 item.
Like have unlimited red shells and switch to a different item and have unlimited of it as well.
I've seen it done on videos on youtube of a guy switching between the big mushroom and red shells and blue shells.

 

[lavamasta]

this video will help u with all your troubles

wii cheating

 

[icebrg5]

Already watched that video.I know how to use ocarnia codes.


Anyway i just tried this again with the new loader and it worked fine now if could onyl figure out how to enable more then 1 item at a time on mario kart.Like have blue shells then switch to big mushrooms then back ext..


Also in the config file can i change where i want it to look for images or does it have to be Root:images everytime?


Right now im not even using a config file.

 

[FenrirWolf]

You don't have to do anything in the config file to use ocarina. The loader will remember your settings if you have that enabled...

And yes, you can change where you want the images directory to be.

 

[icebrg5]

You don't have to do anything in the config file to use ocarina. The loader will remember your settings if you have that enabled...

And yes, you can change where you want the images directory to be.

Thanks finally figured it out.

i was putting the config.txt file in the root of the sd card instead of putting it with the dol file.
Once i put it with the boot.dol file the covers worked.

Thanks again to everyone who helped.

Now to look into the Mario Kart Ocarina issue.

 

[icebrg5]

This is what im talking about,


http://www.youtube.com/watch?v=rAb1pd57zCM

 

[saelee84]

This is what im talking about,


http://www.youtube.com/watch?v=rAb1pd57zCM

awesome video, try to get intact with the person who put up the video. the only code i use is to finish right away, so this way i'll have everything unlocked and duel it out with my friends. sorry again i couldn't help.

 

[Xras]

PAL MARIO KART

Grand Prix - Cycle Through Items
28348200 00000980
CC000000 00000000
48000000 809C22B0
DE000000 80008180
4A100000 FFFF9F5C
92210000 00000000
86000000 00000001
94210000 00000000
34000000 0000000F
14000000 00000000
14000004 00000001
E0000000 80008000
* You will need to use the A+Y buttons on the GCN Controller to cycle through items

I couldn't find the same code for NTSC.
Also, you'll probably need this code in conjunction with another one in the list. Didn't research too much.

Source: http://usbgecko.com/codes/index.php?r=e&c=RMCP01

There are some other sites with codes. I suggest you search a lot

 

[icebrg5]

I found a good site with a shit ton of codes.Just tried the cycle items code that was on there and it works great

just gotta figure out a good button combo to go along with it.

Heres the site if anyone wants it.
It doesnt give you the full codes.
You have to enter in some XXXX YYYY ZZZZ values depending on which controller your using and what button combo you want to use to select the items.



http://volderbeek.freeforums.org/index.php