Can't boot into Atmosphere!

[DefoeDoes]

I'm having a problem in which something on my SD card is preventing me from booting to Atmosphere. When I launch from Hekate, I don't see the triangle logo and I just get a black screen. To be more specific, I followed the Getting Started Guide on switch.hacks.guide. I also decided to create an emuMMC section and I decided to install a few other things. These include SimpleModManager, Tesla, nx-ovlloader, Status Monitor Overlay, SaltyNX, FPSLocker, EOS, sys-clk, and the loader.kip file that came with it. I'm also running this on an OLED Switch on the 18.1.0 firmware. Any help would be greatly appreciated!

 

[jkyoho]

Did it ever work before? copy paste your hekate_ipl.ini content here

 

[DefoeDoes]

Okay. This is what it says:

[config]
updater2p=1

[Atmosphere FSS0 emuMMC]
fss0=atmosphere/package3
kip1=atmosphere/kips/loader.kip
emummcforce=1
icon=bootloader/res/emu_boot.bmp

[Atmosphere FSS0 sysMMC]
fss0=atmosphere/package3
kip1=atmosphere/kips/loader.kip
emummc_force_disable=1
icon=bootloader/res/sys_cfw_boot.bmp

[Stock sysMMC]
fss0=atmosphere/package3
emummc_force_disable=1
stock=1
icon=bootloader/res/stock_boot.bmp

 

[sudeki300]

the guide you used isn't that good, also you should get atmosphere running first before installing a crap load of other stuff, i would gather some of those other apps are not the latest releases which is causing an issue. i would start from scratch using the below guide, once you have atmosphere running, start installing other stuff one at a time so you know which is the culprit if any issues come up.

https://rentry.co/SwitchHackingIsEasy

 

[nitrozz]

disable oc and delete line with loader.kip. reboot

 

[DefoeDoes]

Okay, so I did some experimentation with gradually adding stuff one at a time to see what works and what doesn't and I think the kips and loader.kip are the main culprits. Do y'all know how to fix this?