Hacking BootNTR New Version Research

  • Thread starter Thread starter astronautlevel
  • Start date Start date
  • Views Views 54,091
  • Replies Replies 257
  • Likes Likes 24
I have a something to say. I have an unhacked N3DS XL that's stuck onto OFW 11.2.0-35U after a forced update from having stuff I bought transferred from my dead old 3DS via a call with Nintendo, and I want to try installing BootNTR onto it safely. Do I need to do anything to get it set up? I do plan on buying a 2DS in a few days since I do have the extra funds to afford it if I need to do the dsiwarehax method.
 
I have a something to say. I have an unhacked N3DS XL that's stuck onto OFW 11.2.0-35U after a forced update from having stuff I bought transferred from my dead old 3DS via a call with Nintendo, and I want to try installing BootNTR onto it safely. Do I need to do anything to get it set up? I do plan on buying a 2DS in a few days since I do have the extra funds to afford it if I need to do the dsiwarehax method.
You need CFW - Luma - on it to have BootNTR. NTR injects into your home menu and isn't so much a CFW as Luma but just an addition to it. That said ... All I can say is pray the 2DS has a hackable firmware
 
You need CFW - Luma - on it to have BootNTR. NTR injects into your home menu and isn't so much a CFW as Luma but just an addition to it. That said ... All I can say is pray the 2DS has a hackable firmware
Ah, I see. So Luma is needed to get BootNTR to work. I'm praying for the 2014 model 2DS Mario Kart 7 bundle to have an earlier OFW as long as it's hackable. Praying hard for it.
 
Ah, I see. So Luma is needed to get BootNTR to work. I'm praying for the 2014 model 2DS Mario Kart 7 bundle to have an earlier OFW as long as it's hackable. Praying hard for it.

As long as the box was never opened, your chances of getting a hack-able firmware are 100%.
If it was opened and used, pray like hell and hope it's under 11.0.
 
As long as the box was never opened, your chances of getting a hack-able firmware are 100%.
If it was opened and used, pray like hell and hope it's under 11.0.
I just checked GameStop, and they do have the 2DS Mario Kart 7 Bundle in stock as the store in my area has them. I should submit a hold request. It's in brand new condition.
 
most of 2ds mario kart bundles are at least the 6.0 firmware as I cant imagine them always restocking them with updated consoles since they always have MK7 bundled in them, although i wouldnt specifically go to gamestop as a sure thing, id go with walmart or target instead.
 
most of 2ds mario kart bundles are at least the 6.0 firmware as I cant imagine them always restocking them with updated consoles since they always have MK7 bundled in them, although i wouldnt specifically go to gamestop as a sure thing, id go with walmart or target instead.
I already checked both of them. Walmart ran out of stock. Target doesn't have them in the list, just only Electric Blue 2 and Crimson Red 2.
 
  • Like
Reactions: Hexsyz
The nankitas selector worked to me(New3DS EUR luma with arm9, sysnand 11.2) but im not sure it its cuz the version 11.2 or what but when i try to stream with the debugger it doesnt work properly(it gets stucks on 0fps after 5/10 sec of working)
 
can you make a non auto exit build i kinda found a away to use ntr on old 3ds with sun and moon but it can't get it to work because autoexit does not work in extened memory mode what i did is used the test menu to set memory mode to 80 which means it does not reboot when opening sun and moon and you can close and open apps but the auto exits do not work and i cannot test non auto exit versions since they don't work on the newer firmwares
 
Last edited by hacksn5s4,
  • Like
Reactions: ken28
N3DSXL on SysNAND 9.2. with split Emunand on RX 11.2. I replaced Rxtools with the latest LUMA emu 11.2 but can still not succesfully boot into NTR on 11.2, Should I post dump files? (I am not using the arm9loaderhack)
 
@astronautlevel Do you know if its possible to make bootntr boot in extended memory mode, then enable NTR, and beable to switch to another extended memory mode game? i noticed that when going from one extended memory mode game to another the system doesn't reboot. i tried a test earlier but the system crashed when I pressed home after NTR has been loaded.
if you use the test menu you can make the 3ds boot in extended memory mode every time but ntr crashes once it goes to home menu since the inject address is probs different in extended memory mode and the normal address changes some thing else that causes the system to crash
 
Last edited by hacksn5s4,
NTR Viewer and NTR Debugger error please help?
Everything has been going fine with my debugger on my 3ds, I open NTR Viewer and it shows the set buff size, with a white screen. I put my connect command "(192.168.0.xx',8000)". I am using Luna CFW 6.6 with A9LH. However when I put the "remoteplay()" command on the NTR Debugger. I get this error "
> remoteplay()
null
Will be disconnected in 10 seconds to enhance performance.
> disconnect()
null
Unable to read data from the transport connection: A blocking operation was interrupted by a call to WSACancelBlockingCall.
Server disconnected.
"
What is the problem and how do I fix it?
 
My NTR isn't working. So ok, I tell you the full details of what I did:
I changed my SD Card, I have my 4GB Card in there now which I regionchanged for Ultimate NES Remix and Tri Force Heroes as main purpose.
So all good and the emuNAND is up to date 11.2-35U.
So I downloaded from the OP's post, assuming it's up to date (?) and installed it.
https://github.com/astronautlevel2/BootNTR/releases/download/3.3.1/BootNTR.cia That was the link.

Now I have an error, here it is:

BootNTR 2.4
tmpBuffer: 1418a000
IsNew3DS: 0
firmVersion: 00000000
param is missing: ntrConfig->PMvcRunAddr
testing svc_backDoor
testSvcBackdoor OK
unknown FIRM, access-checks could not be patched
InterProcessDmaFinishState: fff84404
copyRemoteMemory/controlProcessMemory OK

0x00200000 in HomeMenu: e794110
param is missing: ntrConfig->HomeMenuInjectAddr
unknown Home Menu
open ntr.bin failed
bnBootNTR failed
Press Home Button to return to the menu.

So yeah, that was it, it doesn't work.
Does it support regionchanged menus? I reinstalled the tickets after regionchange like the guide told you so.
I just don't know what's going on.... It's just weird.

Thanks for the help :)
 
My NTR isn't working. So ok, I tell you the full details of what I did:
I changed my SD Card, I have my 4GB Card in there now which I regionchanged for Ultimate NES Remix and Tri Force Heroes as main purpose.
So all good and the emuNAND is up to date 11.2-35U.
So I downloaded from the OP's post, assuming it's up to date (?) and installed it.
https://github.com/astronautlevel2/BootNTR/releases/download/3.3.1/BootNTR.cia That was the link.

Now I have an error, here it is:

BootNTR 2.4
tmpBuffer: 1418a000
IsNew3DS: 0
firmVersion: 00000000
param is missing: ntrConfig->PMvcRunAddr
testing svc_backDoor
testSvcBackdoor OK
unknown FIRM, access-checks could not be patched
InterProcessDmaFinishState: fff84404
copyRemoteMemory/controlProcessMemory OK

0x00200000 in HomeMenu: e794110
param is missing: ntrConfig->HomeMenuInjectAddr
unknown Home Menu
open ntr.bin failed
bnBootNTR failed
Press Home Button to return to the menu.

So yeah, that was it, it doesn't work.
Does it support regionchanged menus? I reinstalled the tickets after regionchange like the guide told you so.
I just don't know what's going on.... It's just weird.

Thanks for the help :)

https://github.com/astronautlevel2/BootNTR/releases
 

Site & Scene News

Popular threads in this forum